Details, datasheet, quote on part number: 0722
CompanyTexas Instruments, Inc.
DatasheetDownload 0722 datasheet
Find where to buy


Features, Applications


The 722 converts a single to 16VDC input into a pair of bipolar output voltages of the same value as the input voltage. The converter is capable of providing a total output current 64mA at rated voltage accuracy and to 200mA without damage. The two output channels are isolated from the input and from each other. They may be connected independently, in series for higher output voltage or in parallel for higher output current, as a single channel isolated DC/DC converter. Integrated circuit construction of the 722 reduces size and cost. High isolation breakdown voltages and low leakage currents are assured by special design and construction that includes use of a high dielectric strength, low leakage coating used on the internal assembly. A self-contained 900kHz oscillator drives switching circuitry, which is designed to eliminate the common problem of input current spiking due to transformer saturation or crossover switching.





Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.


NOTES: (1) For the most current specifications, and package information, refer to our web site at to +60C for 16mA ILOAD 40mA per output.

Supply Voltage, V+ to V..................................................................... 16V Input Current................................................................................... 275mA Operating Temperature.................................................... to +80C Storage Temperature...................................................... to +125C Junction Temperature..................................................... to +125C NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

= +25C, VIN = 0.47F, and R1 selected per typical characteristic, unless otherwise noted. 722 PARAMETER INPUT Rated Input Voltage Input Voltage Range(1) Input Current CONDITIONS MIN TYP 15 5 Total Output Current = 12mA Total Output Current = 64mA Total Output Current = +85C Total Output Current = 160mA Total Output Current = 12mA Total Output Current = 64mA Total Output Current = 160mA Input-to-Output, 5 seconds, min Input-to-Output, 1 minute, min Channel-to-Channel, 5 seconds, min Input-to-Output, continuous Channel-to-Channel, continuous Input-to-Output Input-to-Output, 240V, 60Hz ILOAD = 3mA per Output ILOAD = 16mA per Output ILOAD = 40mA per Output Total of All Outputs Any One Output(5) ILOAD = 3mA per Output ILOAD = 16mA per Output ILOAD = 40mA per Output Balanced Loads 14.3 3

Rated Voltages Isolation Impedance Leakage Current(3) OUTPUT Rated Output Voltages(4)
Output Current Load Regulation Ripple Voltage

Tracking Error between Dual Outputs Sensitivity to Input Voltage Changes Output Voltage Temperature Coefficient TEMPERATURE Specification Storage Junction Temperature Specifications same as 722.

NOTES: (1) For ambient temperature above +70C, the input voltage is 12.5V (max). The input voltage remains 16V (max) if case temperature is kept below +85C. (2) External capacitor across to V pins and of #24 wire to VIN. (3) Reference UL544, paragraph 27.5, Leakage Current. (4) See Typical Characteristics. (5) A minimum output current 3mA at each output is recommended to maintain output voltage accuracy.


Some Part number from the same manufacture Texas Instruments, Inc.
0722BG ti 0722, Dual-isolated DC/DC Converter
0804MC ti 0804MC, 8-Pin TO-3 Socket
1825A High Speed PWM Controller
1P1G125QDCKRQ1 Q1 - Automotive Catalog Single Bus Buffer Gate With 3-State Output
1P1G125QDCKRQ1 ti SN74LVC1G125Q-Q1, Automotive Catalog Single Bus Buffer Gate With 3-State Output
1P1G3157QDBVRQ1 Q1 - Automotive Catalog Single-Pole, Double-throw Analog Switch
1P1G3157QDCKRQ1 ti SN74LVC1G3157-Q1, Automotive Catalog Single-Pole, Double-throw Analog Switch
2825A High Speed PWM Controller
3581J ti 3581, High Voltage Operational Amplifiers
3583JM ti 3583, High-Voltage, High-current Operational Amplifier
3584JM ti 3584, High-voltage Operational Amplifier
3606BG ti 3606, Digitally-controlled Programmable Gain Instrumentation Amplifier
3650HG ti 3650, Optically Coupled Linear ISOlation Amplifier
3656AG ti 3656, Transformer Coupled ISOlation Amplifier
3825A High Speed PWM Controller

SN54HC4060FK : ti SN54HC4060, Asynchronous 14-Stage Binary Counters And Oscillators

SN54HC42FK : 4-line to 10-line Decoders 1 of 10

SN74ABT7820PH : 512 18 2 Strobed Bidirectional First-in, First-out Memory

TPS2849PWP : MOSFET and Power Drivers ti TPS2849, Fast, Synchronous-buck MOSFET Drivers With 8V Drive Regulator

TPS64200DBVT : Switching DC/DC Controllers ti TPS64200, Adjustable, up to 3A, 95% Efficient Step-down Controller, 20uA, SOT-23

UC385T-2 : ti UC385-2, Fast Transient Response 5 Ampere Low Dropout (LDO) Regulator

TPS650003RTER : 2.25MHz Step-Down Converter With Dual LDOs & SVSe The TPS65000 and TPS65001 are single chip Power Management ICs for portable applications. Both devices combine a single step-down converter with two low dropout regulators. The step-down converter enters a low power mode at light load for maximum ef

TPS3836J25MDBVTEP : Nanopower Supervidory Circuits

PT7750N : 15 AMP 24V Input big-hammer Iii Programmable ISR

UCC28528 : Advanced Pfc/pww Combination Controller WITH Trailing-edge/trailing-edge Modulation

74CBT16212ADGVRG4 : 20-bit FET BUS Switch

TLV70528YFPT : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 2.8V 200MA 4DSBGA Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

M51971 : Motor Speed Control (f-g Type). The is a semiconductor integrated circuit designed to control the motor rotating speed. The built-in FG amplifier with high gain enables to use a wide range of rotating speed detector (FG detector). Use of less external parts enables DC motors to be controlled with high precision. Non-inverted input Inverted input Amplifier output q Wide range of supply.

ACT5810 : Nine Channel PMU for Mobile Phones. Product Brief, 28-Aug-07 Advanced Information - All Information Subject to Change Multiple Patents Pending Li+ Battery Charger with Integrated MOSFET - ON/OFF Control Charger Current Monitor Output Six Low Noise LDOs 150mA - Programmable LDO Output Voltages Two N-channel Open Drain Switches I2CTM Compatible Serial Interface - Configurable Operating.

BUT134 : Power Transistors.

MH1Q : Quadrature Downconverter. The is a quadrature downconverter, intended primarily for application in professional and consumer digital satellite tuners. The device contains all elements necessary, with the exception of external local oscillator tank to form a complete system operating at standard satellite receiver intermediate frequencies. It is intended for use with external.

066271U050FE2 : Type 066/066r 85 C & 105 C, Standard, Axial Leaded, Aluminum. Ideal for general purpose use where long life at rated temperature and operating voltage are important. Type 066 is equipped with a molded top and uses an o-ring to ensure a long life seal and an expected life of more than ten years in most applications. Type 066X has extra capacitance. Type 066R has lower ESR and higher ripple capability. Long life,.

H3663R-14-ND : Plug to Cable Modular Cable Assembly 14.0' (4.30m) -; CABLE ASSY 6 POSITION 6 CONTACT. s: Color: Silver ; : - ; Length: 14.0' (4.30m) ; Number of Positions/Contacts: 6p6c (RJ11, RJ12, RJ14, RJ25) ; Style: Single Ended ; Connector Type: Plug to Cable ; Shielding: Unshielded ; Mounting Type: Free Hanging (In-Line) ; Cable Type: Flat, Straight Cable ; Lead.

OMNIVSINT1000 : UPS, 230V, 1000VA / 500W. s: Capacity (VA / W): 1000VA / 500W ; No. of Outlets: 6 ; Input Voltage Range VAC: 230V ; Input Voltage Range VDC: - ; Output Voltage: 230V ; Backup Time - Full Load: 5min ; Length: 7.5" ; Width: 5.2" ; Height: 10.8" ; Plug Type: -.

FLK-TIR32 60HZ : THERMAL IMAGER, -20C TO 150C. High performance thermal imagers have never been this affordable. This rugged. Or, this easy to use until now. We, at Fluke, are never satisfied leaving the best tools in the hands of the elite, which is why we recently added a new member to our thermal imaging family. The new Fluke TiR32 combines a powerful 320x240 sensor into the award winning, rugged.

ECW-F4563HLB : 0.056F Film Capacitor Radial; CAP FILM 0.056UF 400VDC RADIAL. s: Capacitance: 0.056F ; Tolerance: 3% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.295" (7.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : High Frequency and High Stability ; Lead Free Status:.

3-1437667-7 : Through Hole Terminal Block - Barrier Block Connectors, Interconnect Through Hole; CONN BARRIER BLOCK 13CIRC 8.26MM. s: Color: Black ; Mounting Type: Through Hole ; Number of Rows: 1 ; Pitch: 0.325" (8.255mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 13 ; : - ; Current: 20A ; Voltage: 150V ; Wire Gauge: 12-22 AWG ; Top Termination:.

EEC06DRTH : Tin Through Hole Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 12POS DIP .100 SLD. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Tin ; Mounting Type: Through Hole ; : - ; Number of Positions: 12 ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Packaging: Tube.

AMC44DRXS : Gold Through Hole Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 88POS .100 DIP SLD. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole ; : - ; Number of Positions: 88 ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Packaging:.

A9AAT-1303F : Ffc, Fpc (flat Flexible) Cable Assembly 3.0" (76.2mm); FLEX CABLE - AFE13T/AF13/AFE13T. s: Pitch: 0.100" (2.54mm) ; Contact Termination: Solder Tab to Solder Tab ; Length: 3.0" (76.2mm) ; Number of Positions: 13 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MS3106E14S-6S : Aluminum, Olive Drab Cadmium Plated Free Hanging (In-Line) Circular Connectors, Interconnect Plug, Female Sockets; CONN PLUG 6 POS STRAIGHT W/SCKT. s: Connector Type: Plug, Female Sockets ; Shell Size - Insert: 14S-6 ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Threaded ; : Strain Relief ; Packaging: Bulk ; Number of Positions: 6 ; Termination:.

SSM-125-L-SV : Gold Surface Mount Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle, Pass Through; CONN RCPT .100" 25POS SNGL VERT. s: Color: Black ; Connector Type: Receptacle, Pass Through ; Contact Finish: Gold ; : - ; Mounting Type: Surface Mount ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch: 0.100" (2.54mm).

DF19G-14S-1F(05) : Tin-Copper Free Hanging (In-Line) Ffc, Fpc (flat Flexible) - Connector - Free Hanging Connectors, Interconnect Bottom Contacts; CONN SOCKET FPC 14POS 1MM SINGLE. s: Connector Type: Bottom Contacts ; : - ; Mounting Type: Free Hanging (In-Line) ; Number of Positions: 14 ; Packaging: Bulk ; Pitch: 0.039" (1.00mm) ; Termination: Crimp ; Contact Material:.

WLS1271L : IC WLAN BLUETOOTH ARM MODULE. s: Family: RF Transceivers ; Series: - ; Frequency: 2.4GHz ; Data Rate - Maximum: 65Mbps ; Modulation or Protocol: 802.11 b/g/n, Bluetooth ; Applications: General Purpose ; Power - Output: 18dBm ; Sensitivity: -90dBm ; Voltage - Supply: 3 V ~ 4.2 V ; Current - Receiving: 100mA ; Current - Transmitting: 180mA ; Data Interface:.

TNPW04024K30BEED : 4.3K Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 4.30K OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 4.3K ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

02989521 : 0.8 mm2, RING TERMINAL. s: Terminal Type: Ring Terminal ; International: 0.8000 mm2.

180BCF6 : Power Line Filters Power Line Fillers A180 Threaded Bolt. TE Connectivity 3-Phase BCF Power Line Filters are used to reduce noise emissions typically associated with variable speed motors. The BCF filters allow wires to be terminated at a variety of angles, significantly improving the filters ability to be used in groups or confined spaces. Current.

0-C     D-L     M-R     S-Z