Details, datasheet, quote on part number: 5962-9089502MPA
Part5962-9089502MPA
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers
Descriptionti TLC2654, Low-noise Chopper-stabilized Operational Amplifier
CompanyTexas Instruments, Inc.
DatasheetDownload 5962-9089502MPA datasheet
Quote
Find where to buy
 
  

 

Features, Applications
TLC2654, TLC2654A Advanced LinCMOS LOW-NOISE CHOPPER-STABILIZED OPERATIONAL AMPLIFIERS

Input Noise Voltage 0.5 V (Peak-to-Peak) Typ, 1.5 V (Peak-to-Peak) Typ, Hz 47 nV/Hz Typ, Hz 13 nV/Hz Typ, = 1 kHz High Chopping Frequency. 10 kHz Typ No Clock Noise Below 10 kHz No Intermodulation Error Below 5 kHz Low Input Offset Voltage 10 V Max (TLC2654A) Excellent Offset Voltage Stability With Temperature. 0.05 V/C Max AVD. 135 dB Min (TLC2654A) CMRR. 110 dB Min (TLC2654A) kSVR. 110 dB Min Single-Supply Operation Common-Mode Input Voltage Range Includes the Negative Rail No Noise Degradation With External Capacitors Connected to VDD Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control/Print Support Qualification to Automotive Standards

description

The TLC2654 and TLC2654A are low-noise chopper-stabilized operational amplifiers using the Advanced LinCMOS process. Combining this process with chopper-stabilization circuitry makes excellent dc precision possible. In addition, circuit techniques are added that give the TLC2654 and TLC2654A superior noise performance.

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

Chopper-stabilization techniques provide for extremely high dc precision by continuously nulling input offset voltage even during variations in temperature, time, common-mode voltage, and power-supply voltage. The high chopping frequency of the TLC2654 and TLC2654A (see Figure 1) provides excellent noise performance in a frequency spectrum from near to 10 kHz. In addition, intermodulation or aliasing error is eliminated from frequencies to 5 kHz. This high dc precision and low noise, coupled with the extremely high input impedance of the CMOS input stage, makes the TLC2654 and TLC2654A ideal choices for a broad range of applications such as low-level, low-frequency thermocouple amplifiers and strain gauges and wide-bandwidth and subsonic circuits. For applications requiring even greater dc precision, use the or TLC2652A devices, which have a chopping frequency of 450 Hz.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Advanced LinCMOS is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The TLC2654 and TLC2654A common-mode input voltage range includes the negative rail, thereby providing superior performance in either single-supply or split-supply applications, even at power supply voltage levels as low 2.3 V. Two external capacitors are required to operate the device; however, the on-chip chopper-control circuitry is transparent to the user. On devices in the 14-pin and 20-pin packages, the control circuitry is accessible, allowing the user the option of controlling the clock frequency with an external frequency source. In addition, the clock threshold of the TLC2554 and TLC2654A requires no level shifting when used in the single-supply configuration with a normal CMOS or TTL clock input. Innovative circuit techniques used on the TLC2654 and TLC2654A allow exceptionally fast overload recovery time. An output clamp pin is available to reduce the recovery time even further.

Figure 1 The device inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up. In addition, the TLC2654 and TLC2654A incorporate internal ESD-protection circuits that prevent functional failures at voltages V as tested under MIL-STD-883C, Method 3015; however, exercise care in handling these devices, as exposure to ESD may result in degradation of the device parametric performance. The C-suffix devices are characterized for operation from to 70C. The I-suffix devices are characterized for operation from to 85C. The Q-suffix devices are characterized for operation from to 125C. The M-suffix devices are characterized for operation over the full military temperature range 55C to125C.

PACKAGED DEVICES TA VIOmax V 8 PIN SMALL OUTLINE (D) 8D TLC2654M-8D CERAMIC DIP (JG) TLC2654AMJG TLC2654MJG PLASTIC DIP (P) TLC2654AMP TLC2654MP SMALL OUTLINE (D) TLC2654M-14D 14 PIN CERAMIC DIP (J) TLC2654AMJ TLC2654MJ PLASTIC DIP (N) TLC2654MN 20 PIN CERAMIC DIP (FK) TLC2654AMFK TLC2654MFK

The 8-pin and 14-pin D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2654AC-8DR).

VDD + 11 Clamp Circuit + IN Null A 1 CXB B 2 CXA 8 C RETURN CompensationBiasing Circuit External Components + Main CIC 9 10 CLAMP OUT


 

Related products with the same datasheet
5962-9089502MCA
TLC2654C-14D
TLC2654C-14DR
TLC2654C-8D
TLC2654C-8DR
TLC2654CN
TLC2654CP
TLC2654I-8D
TLC2654I-8DR
TLC2654IN
TLC2654IP
Some Part number from the same manufacture Texas Instruments, Inc.
5962-9089503M2A ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier
5962-9089504QCA ti TLC2654A, Advanced LinCMOS(TM) Low-noise Chopper-stabilized Operational Amplifier
5962-9089601M2A ti TLE2027, Low-noise Precision Operational Amplifier
5962-9089602MPA ti TLE2037, Low-noise High-speed Precision Decomp. Operational Amplifier
5962-9089603Q2A ti TLE2027A, Low-noise High-speed Precision Operational Amplifier
5962-9093201MEA ti TL7770-5, Dual Svs, 5V & Pgmmable, W/pgmmable Time Delay
5962-9093202M2A ti TL7770-12, Dual Svs, 12V & Pgmmable W/pgmmable Time Delay
5962-9093203M2A ti TL7770-15, Dual Svs, 15V & Pgmmable W/pgmmable Time Delay
5962-9093203MEA
5962-9093701M2A ti SN54BCT125A, Quadruple Bus Buffer Gates With 3- State Outputs
5962-9093801M2A ti SN54BCT760, Octal Buffers/drivers With Open-collector Outputs
5962-9093901M2A ti SN54BCT2240, Octal Buffers And Line/mos Drivers With 3-State Outputs
5962-9094001M2A ti SN54BCT623, Octal Bus Transceivers With 3-State Outputs
5962-9095801Q2A ti TLE2161, JFET-input High-output-drive Low-power Decompensated Operational Amplifier
5962-9095802Q2A ti TLE2161A, Excalibur JFET-input High-output-drive Upower Operational Amplifier
5962-9095803Q2A ti TLE2161B, Excalibur JFET-input High-output-drive Upower Operational Amplifier
5962-9095803QPA ti TLE2061A, Excalibur JFET-input High-output-drive Upower Operational Amplifier (Low-Power Version TLE2071)
5962-9096901M2A ti TLC3704, Quad, Micropower, Push-pull Outputs, LinCMOS(TM) Voltage Comparator
5962-9098401MEA ti CD54HCT390, High Speed CMOS Logic Dual Decade Ripple Counter
5962-9098701Q2A ti UC1633, Phase Locked Frequency Controller
5962-9153201Q2A ti TLC3702, Dual, Micropower, Push-pull Outputs, LinCMOS(TM) Voltage Comparator
 
0-C     D-L     M-R     S-Z