|Category||Logic => Transceivers => Standard Transceivers|
|Description||ti SN74ALS243A, Quadruple Bus Transceivers With 3-State Outputs|
|Company||Texas Instruments, Inc.|
|Datasheet||Download SN74ALS243AD datasheet
Two-Way Asynchronous Communication Between Data Buses pnp Inputs Reduce dc Loading Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPsdescription
These quadruple bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing. These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic levels at the output-enable (OEBA and OEAB) inputs. The output-enable inputs can be used to disable the device so that the buses are effectively isolated. The dual-enable configuration gives the quadruple bus transceivers the capability to store data by simultaneously enabling OEBA and OEAB. Each output reinforces its input in this transceiver configuration. When both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, both sets of bus lines (eight in all) retain their states. The 4-bit codes appearing on the two sets of buses are identical.
The SN54ALS243A is characterized for operation over the full military temperature range to 125°C. The SN74ALS243A is characterized for operation from to 70°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages.absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC. 7 V Input voltage, VI: All inputs. 7 V I/O ports. 5.5 V Operating free-air temperature range, TA: to 70°C Storage temperature range. to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
SN54ALS243A MIN VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature NOM 5 MAX 5.5 SN74ALS243A MIN NOM 5 MAX 5.5 UNIT mA °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
VOL II IIH IIL IO§ ICC Control inputs or B ports Control inputs or B ports Control inputs or B ports
All typical values are at VCC = 25°C. For I/O ports, the parameters IIH and IIL include the off-state output current. § The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
¶ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|SN74ALS243ADR ti SN74ALS243A, Quadruple Bus Transceivers With 3-State Outputs|
|SN74ALS244A-1N ti SN74ALS244A, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244BDBLE ti SN74ALS244B, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244C Octal Buffers And Line Drivers With 3-state Outputs|
|SN74ALS244C-1DW ti SN74ALS244C-1, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244CDBLE ti SN74ALS244C, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS245A Octal Bus Transceiver With 3-state Outputs|
|SN74ALS245ADBLE ti SN74ALS245A, Octal Bus Transceivers With 3-State Outputs|
|SN74ALS251 8-input Multiplexer, With 3-state Outputs|
|SN74ALS251D ti SN74ALS251, 1-of-8 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS253 Dual 4-to-1 Data Selector/multiplexer With Inverting 3-state Outputs|
|SN74ALS253D ti SN74ALS253, Dual 1-of-4 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS2540 Octal Line Drivers/mos Drivers With 3-state Outputs|
|SN74ALS2540N ti SN74ALS2540, Octal Line Drivers/mos Drivers With 3-State Outputs|
|SN74ALS2541 Octal Line Driver/mos Driver With 3-state Outputs|
CD74FCT533SM : FCT Interface Logic Octal Transparent Latch, Three-state
SN54S140W : Dual 4-input Positive-nand 50-ohm Line Drivers
SN74AHCT573PW : D-Type (3-State) Latches ti SN74AHCT573, Octal Transparent D-type Latches With 3-State Outputs
SN74LVC861ADGVR : Standard Transceivers ti SN74LVC861A, 10-Bit Bus Transceiver With 3-State Outputs
UC3903N : ti UC3903, Quad Supply And Line Monitor
SN75508 : AC Plasma Display Drivers
TAS5631BDKD : PWM Input 300W Stereo Class D Amplifier With Integrated Feedback The TAS5631B is a high-performance PWM input class-D amplifier with integrated closed-loop feedback technology (known as PurePath HD technology) with the ability to drive up to 300 W (1) stereo into 4- to 8- speakers from a single 50-
INA226 : High-Side Measurement, Bi-Directional Current/Power Monitor W/I2C Interface The INA226 is a current shunt and power monitor with an I2C interface. The INA226 monitors both a shunt voltage drop and bus supply voltage. Programmable calibration value, conversion times, and averaging, combined with an
BQ29310PWRG4 : Pmic - Battery Management Integrated Circuit (ics) Tape & Reel (TR) -; IC BATTERY MANAGEMANT 24TSSOP Specifications: Battery Chemistry: - ; Function: - ; Package / Case: 24-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Operating Temperature: - ; Voltage - Supply: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
TCAN334GDR : CAN Interface IC 3.3-V CAN Transceivers with CAN FD (Flexible Data Rate) 8-SOIC -40 to 125 Texas Instruments TCAN33x 3.3V CAN Transceivers are compatible with the ISO 11898 High-Speed CAN (Controller Area Network) Physical Layer standard. TCAN330, TCAN332, and TCAN334 are specified for data rates up to 1Mbps. Pending the release of the updated version of ISO 11898-2 including CAN FD, a