|Category||Logic => Transceivers => Standard Transceivers|
|Description||ti SN74ALS243A, Quadruple Bus Transceivers With 3-State Outputs|
|Company||Texas Instruments, Inc.|
|Datasheet||Download SN74ALS243ADR datasheet
Two-Way Asynchronous Communication Between Data Buses pnp Inputs Reduce dc Loading Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPsdescription
These quadruple bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing. These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic levels at the output-enable (OEBA and OEAB) inputs. The output-enable inputs can be used to disable the device so that the buses are effectively isolated. The dual-enable configuration gives the quadruple bus transceivers the capability to store data by simultaneously enabling OEBA and OEAB. Each output reinforces its input in this transceiver configuration. When both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, both sets of bus lines (eight in all) retain their states. The 4-bit codes appearing on the two sets of buses are identical.
The SN54ALS243A is characterized for operation over the full military temperature range to 125°C. The SN74ALS243A is characterized for operation from to 70°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages.absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC. 7 V Input voltage, VI: All inputs. 7 V I/O ports. 5.5 V Operating free-air temperature range, TA: to 70°C Storage temperature range. to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
SN54ALS243A MIN VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature NOM 5 MAX 5.5 SN74ALS243A MIN NOM 5 MAX 5.5 UNIT mA °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
VOL II IIH IIL IO§ ICC Control inputs or B ports Control inputs or B ports Control inputs or B ports
All typical values are at VCC = 25°C. For I/O ports, the parameters IIH and IIL include the off-state output current. § The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
¶ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|SN74ALS243AN ti SN74ALS243A, Quadruple Bus Transceivers With 3-State Outputs|
|SN74ALS244A-1N ti SN74ALS244A, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244BDBLE ti SN74ALS244B, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244C Octal Buffers And Line Drivers With 3-state Outputs|
|SN74ALS244C-1DW ti SN74ALS244C-1, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244CDBLE ti SN74ALS244C, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS245A Octal Bus Transceiver With 3-state Outputs|
|SN74ALS245ADBLE ti SN74ALS245A, Octal Bus Transceivers With 3-State Outputs|
|SN74ALS251 8-input Multiplexer, With 3-state Outputs|
|SN74ALS251D ti SN74ALS251, 1-of-8 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS253 Dual 4-to-1 Data Selector/multiplexer With Inverting 3-state Outputs|
|SN74ALS253D ti SN74ALS253, Dual 1-of-4 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS2540 Octal Line Drivers/mos Drivers With 3-state Outputs|
|SN74ALS2540N ti SN74ALS2540, Octal Line Drivers/mos Drivers With 3-State Outputs|
|SN74ALS2541 Octal Line Driver/mos Driver With 3-state Outputs|
SN74161 : Bipolar->TTL Family Counters
SN74AS1008A : Bipolar->AS Family Quadruple 2-input Positive-and Buffer/driver
SN74CBT3345DBR : Standard Bus Switches ti SN74CBT3345, 8-Bit Fet Bus Switch
TLV3701ID : ti TLV3701, Single Nanopower Push-pull Comparator
TPS60111 : Regulated 5v 150-ma Low-noise Charge Pump DC/DC Converter
TSL260 : Light to Voltage ti TSL260, IR Light-to-voltage Converter
TMX32C6415CGLZ300 : Fixed-point Digital Signal Processors
TL062CPSRE4 : Low-power Jfet-input Operational Amplifiers
SN74AUP1G07DRYR : Low-power Single Buffer/driver With Open-drain Outputs
TPS70102PWPG4 : ti TPS70102, Dual-output Low-dropout (LDO) Voltage Regulator With Power up Sequencing For Split vo
OPA2830ID : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) Voltage Feedback Tube 8.5mA 2; IC OPAMP VFB R-R 100MHZ LP 8SOIC Specifications: Packaging: Tube ; Amplifier Type: Voltage Feedback ; Number of Circuits: 2 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 560 V/µs ; Gain Bandwidth Product: 100MHz ; Current - Supply: 8.5mA ; Current - Output / Channel: 82mA ; Voltage - Supply, Single/Dual (±): 2.8 V ~
BQ78PL114RGZT-10S : 4-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQCC48 Specifications: Package Type: Other, 7 X 7 MM, PLASTIC, QFN-48 ; Operating Temperature: -40 to 85 C (-40 to 185 F)