|Category||Logic => Transceivers => Standard Transceivers|
|Description||ti SN74ALS243A, Quadruple Bus Transceivers With 3-State Outputs|
|Company||Texas Instruments, Inc.|
|Datasheet||Download SN74ALS243ANSR datasheet
Two-Way Asynchronous Communication Between Data Buses pnp Inputs Reduce dc Loading Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPsdescription
These quadruple bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing. These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic levels at the output-enable (OEBA and OEAB) inputs. The output-enable inputs can be used to disable the device so that the buses are effectively isolated. The dual-enable configuration gives the quadruple bus transceivers the capability to store data by simultaneously enabling OEBA and OEAB. Each output reinforces its input in this transceiver configuration. When both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, both sets of bus lines (eight in all) retain their states. The 4-bit codes appearing on the two sets of buses are identical.
The SN54ALS243A is characterized for operation over the full military temperature range to 125°C. The SN74ALS243A is characterized for operation from to 70°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages.absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC. 7 V Input voltage, VI: All inputs. 7 V I/O ports. 5.5 V Operating free-air temperature range, TA: to 70°C Storage temperature range. to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
SN54ALS243A MIN VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature NOM 5 MAX 5.5 SN74ALS243A MIN NOM 5 MAX 5.5 UNIT mA °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
VOL II IIH IIL IO§ ICC Control inputs or B ports Control inputs or B ports Control inputs or B ports
All typical values are at VCC = 25°C. For I/O ports, the parameters IIH and IIL include the off-state output current. § The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
¶ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|SN74ALS244A-1N ti SN74ALS244A, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244BDBLE ti SN74ALS244B, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244C Octal Buffers And Line Drivers With 3-state Outputs|
|SN74ALS244C-1DW ti SN74ALS244C-1, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS244CDBLE ti SN74ALS244C, Octal Buffers/line Drivers With 3-State Outputs|
|SN74ALS245A Octal Bus Transceiver With 3-state Outputs|
|SN74ALS245ADBLE ti SN74ALS245A, Octal Bus Transceivers With 3-State Outputs|
|SN74ALS251 8-input Multiplexer, With 3-state Outputs|
|SN74ALS251D ti SN74ALS251, 1-of-8 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS253 Dual 4-to-1 Data Selector/multiplexer With Inverting 3-state Outputs|
|SN74ALS253D ti SN74ALS253, Dual 1-of-4 Data Selectors/multiplexers With 3-State Outputs|
|SN74ALS2540 Octal Line Drivers/mos Drivers With 3-state Outputs|
|SN74ALS2540N ti SN74ALS2540, Octal Line Drivers/mos Drivers With 3-State Outputs|
|SN74ALS2541 Octal Line Driver/mos Driver With 3-state Outputs|
|SN74ALS2541DW ti SN74ALS2541, Octal Line Drivers With 3-State Outputs|
SN74ALS1002A : Bipolar->ALS Family Quadruple 2-input Positive-nor Buffers
TLV2453AIN : ti TLV2453A, Dual 23-uA 220-KHz Rail-to-rail Input/output op Amp W/shutdown
TPS7133QPWG4 : Low-dropout Voltage Regulators
TPS60210DGSR : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Up (Boost), Switched Capacitor (Charge Pump) 100mA 3.3V; IC BST CHRGPUMP 3.3V 0.1A 10MSOP Specifications: Type: Step-Up (Boost), Switched Capacitor (Charge Pump) ; Output Type: Fixed ; PWM Type: - ; Synchronous Rectifier: No ; Number of Outputs: 1 ; Voltage - Output: 3.3V ; Current - Output: 100mA ; Frequency - Switching: 300kHz ; Voltage - Input: 1.8 V ~ 3.6 V ; Lead Free Status: Lead F
TPS54140QDRCRQ1 : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) No 0.8 V ~ 39 V; IC BUCK ADJ 1.5A 10SON Specifications: Type: Step-Down (Buck) ; Output Type: Adjustable ; PWM Type: Current Mode ; Synchronous Rectifier: No ; Number of Outputs: 1 ; Voltage - Output: 0.8 V ~ 39 V ; Current - Output: 1.5A ; Frequency - Switching: 300kHz ~ 2.5MHz ; Voltage - Input: 3.5 V ~ 42 V ; Lead Free Status: Lead Fre
CD74HC4075PWT : 4-CHANNEL, DIFFERENTIAL MULTIPLEXER, PDSO16 Specifications: Applications: Military ; Supply Voltage (VS): -4.5 to 6 volts ; Ron: 130 ohms ; tON: 46 ns ; tOFF: 38 ns ; VISO: 67 dB ; &nb916;RON: 5 ohms ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: SOIC, PLASTIC, MS-012AC, SOIC-16 ; Number of Pins: 16 ; Number of Devices:
SN74LVC1G3157DBVR : IC SWITCH SPDT SOT23-6 Texas Instruments' SN74LVC1G3157, single-pole, double-throw (SPDT) analog switches are designed for 1.65 VCC to 5.5 VCC operations. The SN74LVC1G3157 devices can handle both analog and digital signals. The SN74LVC1G3157 devices permit signals with amplitudes of up to VCC (peak) to