Details, datasheet, quote on part number: SN74ALS2541
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionOctal Line Driver/mos Driver With 3-state Outputs
CompanyTexas Instruments, Inc.
DatasheetDownload SN74ALS2541 datasheet
Find where to buy


Features, Applications

3-State Outputs Drive Bus Lines or Buffer Memory Address Registers pnp Inputs Reduce dc Loading Outputs Have 25- Series Resistor So No External Resistors Are Required Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (N) 300-mil DIPs


12 This octal line driver/MOS driver is designed 10 11 drive the capacitive input characteristics of MOS devices and to have the performance of the popular SN74ALS240 series. At the same time, this device offers a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed-circuit-board layout.

The 3-state output-control gate a 2-input NOR. If either output-enable or OE2) input is high, all eight outputs are in the high-impedance state. The SN74ALS2541 provides true data at the outputs. The SN74ALS2541 is characterized for operation from to 70C.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum rating over operating free-air temperature range (unless otherwise noted)

Supply voltage, VCC. 7 V Input voltage, VI. 7 V Voltage applied to a disabled 3-state output. 5.5 V Operating free-air temperature range, TA. to 70C Storage temperature range. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

MIN VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature NOM 5 MAX 5.5 UNIT mA C

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER VIK VOH VOL IOZH IOZL IOH IOL II IIH IIL IO ICC TEST CONDITIONS VCC 4.5 V, VCC 5.5 V, VCC 4.5 5V VCC 5.5 V, VCC 5.5 V, VCC 4.5 V, VCC 4.5 V, VCC 5.5 V, VCC 5.5 V, VCC 5.5 V, VCC 5.5 V, VCC 18 mA IOH 0.4 mA IOL 1 mA IOL 2.25 V Outputs high Outputs low Outputs disabled mA MIN VCC TYP MAX 1.2 UNIT A mA

All typical values are VCC = 25C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.


For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.


Some Part number from the same manufacture Texas Instruments, Inc.
SN74ALS2541DW ti SN74ALS2541, Octal Line Drivers With 3-State Outputs
SN74ALS257A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN74ALS257AD ti SN74ALS257A, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS258A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN74ALS258AD ti SN74ALS258A, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS258D ti SN74ALS258, Quad 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS259 8-bit Addressable Latch
SN74ALS259D ti SN74ALS259, Octal Addressable Latches
SN74ALS273 Octal D Flip-flop With Master Reset
SN74ALS273DW ti SN74ALS273, Octal D-type Positive-edge-triggered Flip-flops With Clear
SN74ALS27A Triple 3-input NOR GATE
SN74ALS27AD ti SN74ALS27A, Triple 3-Input Positive NOR GATEs
SN74ALS27D ti SN74ALS27, Triple 3-Input Positive NOR GATEs
SN74ALS280 9-bit Odd/even Parity Generator/checker
SN74ALS280D ti SN74ALS280, 9-Bit Odd/even Parity Generators/checkers
SN74ALS28A Quadruple 2-input Positive-nor Buffers

PT5826A : Plug-in Power Solutions->Non-Isolated->Single Posi ti PT5826, 1V 16A, 12-V Input Adjustable Step-down Isr

SN74AC04PWLE : ti SN74AC04, Hex Inverters

SN75189ADR : ti SN75189A, Quadruple Line Receiver

TLC2201AMFKB : ti TLC2201A, Advanced LinCMOS(TM) Low-noise Precision Operational Amplifier

BQ24316DSGR : Charger front end protection IC with 30V max Vin and 6.8V OVP The bq24314 and bq24316 are highly integrated circuits designed to provide protection to Li-ion batteries from failures of the charging circuit. The IC continuously monitors the input voltage, the input current, and the battery voltage.

DAC715ULG4 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Dual ; IC DAC 16BIT PAR 28-SOIC Specifications: Data Interface: Parallel ; Number of Bits: 16 ; Operating Temperature: 0C ~ 70C ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Voltage Supply Source: Dual ; Settling Time: 6s ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MAX3232IDE4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tube 3 V ~ 5.5 V; IC DRVR/RCVR MULTCH RS232 16SOIC Specifications: Number of Drivers/Receivers: 2/2 ; Type: Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CD4522BEE4 : Logic - Counters, Divider Integrated Circuit (ics) Divide-by-N Tube 3 V ~ 18 V; IC PRG BCD DIV-BY-N CNTR 16-DIP Specifications: Logic Type: Divide-by-N ; Trigger Type: Positive, Negative ; Voltage - Supply: 3 V ~ 18 V ; Number of Bits per Element: 4 ; Number of Elements: 1 ; Direction: Down ; Mounting Type: Through Hole ; Package / Case: 16-DIP (0.300", 7.62mm) ; Reset: Asynchronous ; Packaging: Tube ; Operat

DS90LV048ATMX : LINE DRIVER Specifications: Device Type: Line / Bus Driver

Same catergory

74F2645 : Bus Oriented Circuits. Octal Bus Transceiver With 25 Ohm Series Resistor in The Outputs.

CD74HCT354E : Multiplexers. ti CD74HCT354, High Speed CMOS Logic 8-Input Multiplexer/register With 3-State Outputs.

CD74HCT4520E : ti CD74HCT4520, High Speed CMOS Logic Dual Binary Up-counters. Data sheet acquired from Harris Semiconductor SCHS216D High-Speed CMOS Logic Dual Synchronous Counters having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or the negativegoing transition of CLOCK. The counters are cleared by high levels on the MASTER RESET lines. The counter can be cascaded in the ripple mode.

IDT74FCT652 : Bus Oriented Circuits. Fast CMOS Octal Transceiver/register (3-state).

IDT74FST163244PF : 16-bit Bus Switch. Bus switches provide zero delay paths Extended commercial range to +85C Low switch on-resistance: 7 TTL-compatible input and output levels ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) Available in SSOP, TSSOP and TVSOP Pin-compatible with FCT16244/FCT162244T The FST163244 belongs to IDT's family of Bus switches. Bus switch.

IN74ACT258D : Quad 2-1 Data Selector/Multiplexer, Inv (3-State) 16. The IN74ACT258 is identical in pinout to the LS/ALS258, HC/HCT258. The IN74ACT258 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This device selects a (4-bit) nibble from either the or B inputs as determined by the Select input. The nibble is presented at the outputs in inverted from when the Output Enable.

M54HC697 : Hc697/699 U/d 4 Bit Binary Counter/register 3-state Hc696/698 U/d Decade Counter/register 3-state.

MC10E195 : Bipolar->ECL 100 Family. Programmable Delay Chip. The is a programmable delay chip (PDC) designed primarily for clock de-skewing and timing adjustment. It provides variable delay of a differential ECL input transition. The delay section consists of a chain of gates organized as shown in the logic symbol. The first two delay elements feature gates that have been modified to have delays 1.25 and 1.5 times.

SN54ABT853FK : 8-bit to 9-bit Parity Bus Transceivers. State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 500 mA Per JESD 17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Drive Outputs (32-mA IOH, 64-mA IOL) High-Impedance State.

SN54BCT25245FK : 25ohm Octal Bus Transceivers With 3-state Outputs. State-of-the-Art BiCMOS Design Significantly Reduces ICCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Designed to Facilitate Incident-Wave Switching for Line Impedances 25 or Greater Distributed VCC and GND Pins Minimize Noise Generated by the Simultaneous Switching of Outputs Package.

SN54BCT8245AJT : Scan Test Devices With Octal Bus Transceivers. SN54BCT8245A, SN74BCT8245A SCAN TEST DEVICES WITH OCTAL BUS TRANSCEIVERS Members of the Texas Instruments SCOPE TM Family of Testability Products Octal Test-Integrated Circuits Functionally Equivalent to 'F245 and 'BCT245 in the Normal- Function Mode Compatible With the IEEE Standard 1149.1-1990 (JTAG) Test Access Port and Boundary-Scan Architecture.

SN54LS591 : 8-bit Binary Counters With Output.

SN7453 : Bipolar->TTL Family. Expandable 4-wide And Or-invert Gates.

SN74LS161AD : ti SN74LS161A, Synchronous 4-Bit Binary Counters. SN54160 THRU SN54163, SN54LS160A THRU SN54S163, SN74160 THRU SN74163, SN74LS160A THRU SN74S162, SN74S163 SYNCHRONOUS 4-BIT COUNTERS PRODUCTION DATA information is current as of publication date. Products conform to s per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. SN54160.

SN74LS76A : Bipolar->LS Family. Dual JK Flip-flop With Set And Clear. The SN74LS76A offers individual J, K, Clock Pulse, Direct Set and Direct Clear inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted. The Logic Level of the J and K inputs will perform according to the Truth Table as long as minimum set-up times are observed. Input data is transferred.

A1440A-2PQG160M : FPGA, 564 CLBS, 4000 GATES, 110 MHz, PQFP160. s: System Gates: 4000 ; Logic Cells / Logic Blocks: 564 ; Package Type: QFP, Other, PLASTIC, MO-108, QFP-160 ; Logic Family: CMOS ; Pins: 160 ; Internal Frequency: 110 MHz ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Supply Voltage: 5V.

A3P060-2TQ144YI : FPGA, 1536 CLBS, 60000 GATES, PQFP144. s: System Gates: 60000 ; Logic Cells / Logic Blocks: 1536 ; Package Type: TQFP, Other, 20 X 20 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, TQFP-144 ; Logic Family: CMOS ; Pins: 144 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Supply Voltage: 1.5V.

0-C     D-L     M-R     S-Z