Details, datasheet, quote on part number: SN74ALS2541NSR
CategoryLogic => Buffers/Drivers => Non-Inverting Buffers and Drivers
TitleNon-Inverting Buffers and Drivers
Descriptionti SN74ALS2541, Octal Line Drivers With 3-State Outputs
CompanyTexas Instruments, Inc.
DatasheetDownload SN74ALS2541NSR datasheet
Find where to buy


Features, Applications

3-State Outputs Drive Bus Lines or Buffer Memory Address Registers pnp Inputs Reduce dc Loading Outputs Have 25- Series Resistor So No External Resistors Are Required Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (N) 300-mil DIPs


12 This octal line driver/MOS driver is designed 10 11 drive the capacitive input characteristics of MOS devices and to have the performance of the popular SN74ALS240 series. At the same time, this device offers a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed-circuit-board layout.

The 3-state output-control gate a 2-input NOR. If either output-enable or OE2) input is high, all eight outputs are in the high-impedance state. The SN74ALS2541 provides true data at the outputs. The SN74ALS2541 is characterized for operation from to 70C.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum rating over operating free-air temperature range (unless otherwise noted)

Supply voltage, VCC. 7 V Input voltage, VI. 7 V Voltage applied to a disabled 3-state output. 5.5 V Operating free-air temperature range, TA. to 70C Storage temperature range. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

MIN VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature NOM 5 MAX 5.5 UNIT mA C

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER VIK VOH VOL IOZH IOZL IOH IOL II IIH IIL IO ICC TEST CONDITIONS VCC 4.5 V, VCC 5.5 V, VCC 4.5 5V VCC 5.5 V, VCC 5.5 V, VCC 4.5 V, VCC 4.5 V, VCC 5.5 V, VCC 5.5 V, VCC 5.5 V, VCC 5.5 V, VCC 18 mA IOH 0.4 mA IOL 1 mA IOL 2.25 V Outputs high Outputs low Outputs disabled mA MIN VCC TYP MAX 1.2 UNIT A mA

All typical values are VCC = 25C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.


For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
SN74ALS257A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN74ALS257AD ti SN74ALS257A, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS258A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN74ALS258AD ti SN74ALS258A, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS258D ti SN74ALS258, Quad 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN74ALS259 8-bit Addressable Latch
SN74ALS259D ti SN74ALS259, Octal Addressable Latches
SN74ALS273 Octal D Flip-flop With Master Reset
SN74ALS273DW ti SN74ALS273, Octal D-type Positive-edge-triggered Flip-flops With Clear
SN74ALS27A Triple 3-input NOR GATE
SN74ALS27AD ti SN74ALS27A, Triple 3-Input Positive NOR GATEs
SN74ALS27D ti SN74ALS27, Triple 3-Input Positive NOR GATEs
SN74ALS280 9-bit Odd/even Parity Generator/checker
SN74ALS280D ti SN74ALS280, 9-Bit Odd/even Parity Generators/checkers
SN74ALS28A Quadruple 2-input Positive-nor Buffers
SN74ALS29818 8-bit Diagnostics/high-speed 8-bit Parallel Pipeline Register

5962-9686701Q2A : D-Type (3-State) Latches ti SN54AHCT373, Octal Transparent D-type Latches With 3-State Outputs

78ST212 : Non-Isolated DC-DC Converters

CDC960DLR : PLL-Based Synthesizers ti CDC960, 200-MHz Clock Synthesizer/driver With Spread Spectrum & Device Control Interface

SN54S08W : Quadruple 2-input Positive-and Gates

TPS72201DBVR : ti TPS72201, Cap Free, Low-Noise, Low Input Voltage 50mA Low Dropout Regulator

UCC3807 : Programmable Maximum Duty Cycle PWM Controller

TPS71936-315DRVT : Dual, 200mA Output, Low Noise High PSRR, Low Dropout Linear Regulator In 2mm X 2mm SON Package The TPS718xx and TPS719xx families of low-dropout (LDO) regulators offer a high power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient responses while consumi

TLV1117-18IDRJRG4 : Adjustable AND Fixed Low-dropout Voltage Regulator

LM3S5651-IQC80-C0 : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 1.08 V ~ 1.32 V; IC ARM CORTEX MCU 128KB 100-LQFP Specifications: Program Memory Size: 128KB (128K x 8) ; RAM Size: 32K x 8 ; Number of I /O: 67 ; Package / Case: 100-LQFP ; Speed: 80MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM Cortex-M3 ; Data Converters: A/D 16x10b ; Core

TPA6010A4EVM : Eval Board - Audio Amplifier Programmers, Development System; EVAL MOD FOR TPA6010A4 Specifications: Amplifier Type: Class AB ; Board Type: Fully Populated ; Max Output Power x Channels @ Load: 2.7W x 2 @ 3 Ohm ; Output Type: 2-Channel (Stereo) with Stereo Headphones ; Operating Temperature: -40C ~ 85C ; Voltage - Supply: 4.5 V ~ 5.5 V ; Utilized IC / Part: TPA6010A4 ; Supplied Co

LM386M-1/NOPB : IC AMP AUDIO PWR .325W AB 8SOIC Texas Instruments' LM386 are power amplifiers designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.

0-C     D-L     M-R     S-Z