|Category||Analog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers => General Purpose => Dual|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25L2C datasheet
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)description
The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.
AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70°C.
These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJMAX = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25L2CD ti TLC25L2, Dual Upower Low-voltage Operational Amplifier|
|TLC25L4ACD ti TLC25L4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25L4BCD ti TLC25L4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25L4CD ti TLC25L4, Quad Upower Low-voltage Operational Amplifier|
|TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier|
|TLC25M2B Lincmose Dual Operational Amplifiers|
|TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier|
|TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier|
5962-87609012A : ti SN54AC04, Hex Inverters
CD54HC244F : Non-Inverting Buffers and Drivers ti CD54HC244, High Speed CMOS Logic Non-inverting Octal Buffer/line Drivers With 3-State Outputs
UCC28516DWR : Power Factor Correction IC's ti UCC28516, Advanced Pfc/pwm Combination Controllers
TMS28F002FB70BDBJE : 4194304-bit Synchronous Flash Memory
TAS5504PAG : 4 Channel Digital Audio PWM Processor
TL974IPWRG4 : Output Rail-to-rail Very-low-noise Operational Amplifiers
ADS6245IRGZ25 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Differential, Unipolar Cut Tape (CT) Analog and Digital; IC ADC 14BIT 125MSPS DUAL 48VQFN Specifications: Number of Bits: 14 ; Package / Case: 48-VFQFN Exposed Pad ; Data Interface: Serial, Parallel ; Packaging: Cut Tape (CT) ; Sampling Rate (Per Second): 125M ; Operating Temperature: -40°C ~ 85°C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 2 Differential, Un
TPS62051DGSG4 : Adjustable, 800-mA, 10V Vin, Enhanced Lbi, Step-down Converter in MSOP-10
SN65LVDS33MDREP : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Receiver Digi-Reel® 3 V ~ 3.6 V; IC DIFF TXRX HI-SPD 16-SOIC Specifications: Number of Drivers/Receivers: 0/4 ; Type: Receiver ; Voltage - Supply: 3 V ~ 3.6 V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Digi-Reel® ; Protocol: LVDS ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
PTH12020WAD : Dc Dc Converter Power Supply - Board Mount; MODULE PIP ADJ 18A 12V T/H 10DIP Specifications: Type: Non-Isolated (POL) ; Number of Outputs: 1 ; Voltage - Input (Min): 10.8V ; Voltage - Input (Max): 13.2V ; Voltage - Output 1: 1.2 ~ 5.5 V ; Voltage - Output 2: - ; Voltage - Output 3: - ; Current - Output (Max): 18A ; Power (Watts) - Manufacture Series: 99W ; Voltage - Isolatio