Details, datasheet, quote on part number: TLC25L2CPSR
PartTLC25L2CPSR
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers
Descriptionti TLC25L2, Dual Upower Low-voltage Operational Amplifier
CompanyTexas Instruments, Inc.
DatasheetDownload TLC25L2CPSR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)

description

The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.

AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70C.

These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJMAX = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25L2CDR
TLC25L2CP
TLC25L2CPW
TLC25L2CPWR
TLC25L2CPWRG4
TLC25L2CPS
TLC25L2CPSRG4
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25L2CPW ti TLC25L2, Dual Upower Low-voltage Operational Amplifier
TLC25L2Y
TLC25L4
TLC25L4A
TLC25L4ACD ti TLC25L4A, LinCMOS(TM) Quad Operational Amplifier
TLC25L4B
TLC25L4BCD ti TLC25L4B, LinCMOS(TM) Quad Operational Amplifier
TLC25L4C
TLC25L4CD ti TLC25L4, Quad Upower Low-voltage Operational Amplifier
TLC25L4Y
TLC25LX
TLC25LXA
TLC25LXB
TLC25M2
TLC25M2A
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier

SN74AUP1G98DCKR : Low-power Configurable Multiple-function Gate

SN74CBT16214CDLR : 12-Bit 1-Of-3 Fet Multiplexer/demultiplexer With -2V Undershoot-protection

SN751178NS : ti SN751178, Dual Differential Driver/receiver Pairs

TL031MFK : Enhanced-JFET Low-power Low-offset Operational Amplifiers

PTH08T240WAH : 10-A, 4.5V to 14V Input, Non-Isolated, Wide Output Adjustable Power Module with TurboTrans The PTH08T240W is a high-performance 10-A rated, non-isolated power module. This regulator represents the 2nd generation of the popular PTH series power modules. Operating from an input voltage range of

SN74LVC2G08IDCURQ1 : 32-bit BUS Transceiver WITH 3-state Outputs

TAS5424ATDKDQ1G4 : Four-channel Automotive Digital Amplifiers

CC1000PPK-868 : Single Chip Very Low Power RF Transceiver

SN74F21NE4 : Logic - Gate And Inverter Integrated Circuit (ics) AND Gate Tube 1mA, 20mA 4.5 V ~ 5.5 V; IC GATE POS-AND DUAL 4IN 14-DIP Specifications: Number of Circuits: 2 ; Package / Case: 14-DIP (0.300", 7.62mm) ; Logic Type: AND Gate ; Packaging: Tube ; Mounting Type: Through Hole ; Number of Inputs: 4 ; Current - Output High, Low: 1mA, 20mA ; Operating Temperature: 0C ~ 70C ; Voltage - Supply: 4.5 V ~ 5.5 V ; Lead Free Statu

THS4281DG4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) Voltage Feedback Tube 800A 1; IC OPAMP VFB R-R 95MHZ SGL 8SOIC Specifications: Packaging: Tube ; Amplifier Type: Voltage Feedback ; Number of Circuits: 1 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 35 V/s ; Gain Bandwidth Product: - ; Current - Supply: 800A ; Current - Output / Channel: 60mA ; Voltage - Supply, Single/Dual (): 2.7 V ~ 16.5 V

TPS659101A1RSL : IC PWR MGMT 8 LDO 48VQFN The Texas Instruments' certified hardware and software components for PROFINET IRT v2.3 device applications is the leading industrial Ethernet standard used in numerous Industrial segments and end-equipments that require real-time deterministic exchange of IO data and additional bandwidth for ser

 
0-C     D-L     M-R     S-Z