Details, datasheet, quote on part number: TLC25L4
PartTLC25L4
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => Ultra-Low-Power Op Amps (<=250uA)
Part familyTLC25L4 Quad uPower Low-Voltage Operational Amplifier
DescriptionQuad uPower Low-Voltage Operational Amplifier 14-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSCompliant
SampleNo
DatasheetDownload TLC25L4 datasheet
Cross ref.Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA
Quote
Find where to buy
 
Specifications 
Vos (Offset Voltage @ 25C)(Max)(mV)10
Operating Temperature Range(C)0 to 70
Offset Drift(Typ)(uV/C)1.8
RatingCatalog
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
Vn at 1kHz(Typ)(nV/rtHz)68
Rail-to-RailIn to V-
Slew Rate(Typ)(V/us)0.03
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
Approx. Price (US$)2.41 | 1ku
GBW(Typ)(MHz)0.085
ArchitectureCMOS
Number of Channels(#)4
CMRR(Typ)(dB)94
Iq per channel(Typ)(mA)0.01
Iq per channel(Max)(mA)0.017
Input Bias Current(Max)(pA)60
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
Package GroupPDIP,SOIC
Additional FeaturesN/A
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G50TUBETLC25L4C 3.918.651.581.27
Spice Model
TLC25L4, TLC25L4A, TLC25L4B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25L4C
TLC25L4Y
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25L4A
TLC25L4ACD ti TLC25L4A, LinCMOS(TM) Quad Operational Amplifier
TLC25L4B
TLC25L4BCD ti TLC25L4B, LinCMOS(TM) Quad Operational Amplifier
TLC25L4C
TLC25L4CD ti TLC25L4, Quad Upower Low-voltage Operational Amplifier
TLC25L4Y
TLC25LX
TLC25LXA
TLC25LXB
TLC25M2
TLC25M2A
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
Same catergory

2SK371 : N-channel Junction Type ( For Low Noise Audio Amplifier Applications ).

ADP3610 : Power. 320 ma Switched Capacitor Voltage Doubler. Push-Pull Charge Pump Doubler Reduces Output Ripple +3.6 V Operation V OUT 320 mA Maximum Load Output Impedance, RTOTAL 1.66 Shutdown Capability Overvoltage Protection: VIN +4 V Operating Temperature Range: +85 C Thermally Enhanced 16-Lead TSSOP Package APPLICATIONS High Current Doublers LCD Panels Cellular Phones Inductorless Boost Converters GENERAL.

HYB514800BJ : 512kx8-bit Dynamic RAM. 512 288 words by 8-bit organization 70 C operating temperature Fast access and cycle time RAS access time: ns (-60 version) ns (-70 version) ns (-80 version) CAS access time: 20 ns Cycle time: ns (-60 version) ns (-70 version) ns (-80 version) Fast page mode cycle time ns (-60 version) ns (-70 version) ns (-80 version) Single V 10 supply with a built-in.

LC78711E : Graphic Display Processor. The is a CMOS LSI that provides graphics display drawing functions. In addition to implementing graphics display for NTSC and PAL signals, it provides two 32-dot sprite display patterns and can easily implement a wide range of displays. Two-chip structure consisting of this LSI, the LC78711E, and an external 4-bit RAM. (An RGB encoder is built in.).

LF347BD : ti LF347B, Wide-bandwidth JFET-input Quad Operational Amplifier. Low Input Bias Current. 50 pA Typ Low Input Noise Current 0.01 pA/Hz Typ Low Total Harmonic Distortion Low Supply Current. 8 mA Typ Gain Bandwidth. 3 MHz Typ High Slew Rate. 13 V/s Typ Pin Compatible With the LM348 These devices are low-cost, high-speed, JFET-input operational amplifiers. They require low supply current yet maintain a large gain-bandwidth.

LT1229 : LT1229, Dual 100MHz Current Feedback Amplifiers. 100MHz Bandwidth 1000V/s Slew Rate Low Cost 30mA Output Drive Current 0.04% Differential Gain 0.1 Differential Phase High Input Impedance: 25M, 3pF Wide Supply Range: to 15V Low Supply Current: 6mA Per Amplifier Inputs Common Mode to Within 1.5V of Supplies Outputs Swing Within 0.8V of Supplies The LT1229/LT1230 dual and quad 100MHz current feedback.

LT1342 : 5V RS232 Transceiver With 3V Logic Interface. ESD Protection Over 10kV 3V Logic Interface Uses Small Capacitors: 0.2F 1A Supply Current in Shutdown Low Power Driver Disable Operating Mode Pin Compatible with LT1137A 120kBaud Operation for 2500pF 250kBaud Operation for = 1000pF CMOS Comparable Low Power: 60mW Operates from a 5V Supply and 3V Logic Supply Easy PC Layout: Flowthrough Architecture.

NJU7507XD : Band Pass Filter For Audio Spectrum Analyzer Display.

TC5141001 : 4,194,304 Word X 1 Bit Dynamic RAM.

TD62002 : 7ch Darlington Sink Driver.

TLV2774AID : ti TLV2774A, Quad 2.7-V High-slew-rate Rail-to-rail Output Operational Amplifier.

TS4900 : 0.7MW Mono Audio Amplifier at 3.3V Supply With Standby Active High. at 3.3V SUPPLY AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE HIGH THD=1%, f=1kHz, with an 8 load s ULTRA LOW CONSUMPTION IN STANDBY MODE s 75dB PSRR @ 217Hz from 2.6V s ULTRA LOW POP & CLICK s ULTRA LOW DISTORTION (0.1%) s UNITY GAIN STABLE s AVAILABLE & SO8 The is an audio power amplifier designed to provide the best price to power ratio while preserving.

VFC121AP : ti VFC121, Precision Single Power Supply Voltage-to-frequency Converter.

ADA4857-1 : Ultralow Distortion, Low Power, Low Noise, High Speed Op Amp The ADA4857 is a unity gain stable, high speed, voltage feedback amplifier with low distortion, low noise, and high slew rate. With a spurious-free dynamic range (SFDR) of ?88 dBc @ 10 MHz, the ADA4857 is an ideal solution in a variety of applications including ultrasounds, ATE, active filters,.

 
0-C     D-L     M-R     S-Z