Details, datasheet, quote on part number: TLC25L4B
PartTLC25L4B
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyTLC25L4B LinCMOS™ Quad Operational Amplifier
DescriptionLinCMOS™ Quad Operational Amplifier 14-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload TLC25L4B datasheet
Cross ref.Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA
Quote
Find where to buy
 
Specifications 
Operating Temperature Range(C)0 to 70
Offset Drift(Typ)(uV/C)1.8
RatingCatalog
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
FeaturesN/A
Vn at 1kHz(Typ)(nV/rtHz)68
Rail-to-RailIn to V-
Slew Rate(Typ)(V/us)0.03
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
GBW(Typ)(MHz)0.085
Vos (Offset Voltage @ 25C)(Max)(mV)2
ArchitectureCMOS
Number of Channels(#)4
CMRR(Typ)(dB)94
Iq per channel(Typ)(mA)0.01
Iq per channel(Max)(mA)0.017
Input Bias Current(Max)(pA)60
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
Package GroupPDIP,SOIC
Approx. Price (US$)2.65 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G50TUBE25L4BC 3.918.651.581.27
Spice Model
TLC25L4, TLC25L4A, TLC25L4B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25L4BC
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25L4BC
TLC25L4BCD ti TLC25L4B, LinCMOS(TM) Quad Operational Amplifier
TLC25L4C
TLC25L4CD ti TLC25L4, Quad Upower Low-voltage Operational Amplifier
TLC25L4Y
TLC25LX
TLC25LXA
TLC25LXB
TLC25M2
TLC25M2A
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B

THS4022D : 350-mhz Low-noise High-speed Amplifiers

TLC2652AMJ : ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier

UCC2802J : Current Mode ti UCC2802, Low-power Bicmos Current-mode PWM

TPS72501DCQG4 : Micropower Low-dropout (ldo) Voltage Regulators

LM317LILPE3 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC 3-TERM ADJ REG TO-92-3 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

SN74F125NSRG4 : Non-Inverting Buffers and Drivers ti SN74F125, Quadruple Bus Buffer Gate With 3-State Outputs

OPA2227UE4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tube 3.7mA 5 V ~ 36 V, 2.5 V ~ 18 V; IC OPAMP GP 8MHZ DUAL LN 8SOIC Specifications: Packaging: Tube ; Amplifier Type: General Purpose ; Number of Circuits: 2 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 2.3 V/s ; Gain Bandwidth Product: 8MHz ; Current - Supply: 3.7mA ; Current - Output / Channel: 45mA ; Voltage - Supply, Single/Dual (): 5 V ~ 36 V,

PMLKBUCKBOOSTEVM : Power Management IC Development Tools TI-PMLK Buck-Boost Experiment Board using LM5118

Same catergory

289 : Precision, Wide Bandwidth, Synchronized ISOlation Amplifier. Precision, Wide Bandwidth, Synchronized Isolation Amplifier Low Nonlinearity: 0.012% max (289L) Frequency Response: to 20kHz (Full Power) to 5kHz Gain Adjustable to 100V/V, Single Resistor 3-Port Isolation: +2500V CMV Isolation Input/Output Low Gain Drift: 0.005%/C max Floating Power Output: 5mA 120dB CMR at 60Hz: Fully Shielded Input Stage Meets.

AD603ACHIPS : Low Noise, 90 MHZ Variable-gain Amplifier. "Linear in dB" Gain Control Pin Programmable Gain Ranges +31 dB with 90 MHz Bandwidth +51 dB with 9 MHz Bandwidth Any Intermediate Range, e.g., +41 dB with 30 MHz Bandwidth Independent of Variable Gain 1.3 nV/Hz Input Noise Spectral Density 0.5 dB Typical Gain Accuracy MIL-STD-883 Compliant and DESC Versions Available APPLICATIONS RF/IF AGC Amplifier.

CAT5259 : Quad 256-Tap DPP With 2-wire Interfacethe CAT5259 is Four Digitally Programmablepotentiometers (DPPs ) Integrated With Control Logicand 16 Bytes of Nvram Memory. Each DPP Consists Ofa Series of Resistive Elements Connected Between Twoexternally Accessible End Points. The Tap Points Betweeneach Resistive Element Are Connected to The Wiper Outputswith.

CHA4092REF : 20-30ghz High Power Amplifier. The is a high gain broadband threestage balanced monolithic power amplifier. It is designed for a wide range of applications, from military to commercial communication systems. The circuit is manufactured with a PM-HEMT process, 0.25m gate length, via holes through the substrate, air bridges and electron beam gate lithography. It is available in chip.

EL2045C : Low-Power, 100 Mhz, Gain-of-2 Stable op Amp. 100 MHz gain-bandwidth product Gain-of-2 stable Low supply current g 15V Wide supply range g 18V dual-supply to 36V single-supply High slew rate V ms Fast settling 0 1% for a 10V step Low differential gain e 150X Low differential phase e 150X Stable with unlimited capacitive load Wide output voltage swing 13 6V with 0 3V with e 500X The is a high speed.

EL2344C : Triple Low-power 60 MHZ Unity-gain Stable op Amp. 60 MHz gain-bandwidth product Unity-gain stable Low supply current (per Amplifier) g 15V Wide supply range g 18V dual-supply to 36V single-supply High slew rate V ms Fast settling 0 1% for a 10V step Low differential gain e 150X Low differential phase e 150X Stable with unlimited capacitive load Wide output voltage swing 13 6V with 0 3V with e 500X.

EL2357C : 125 MHZ Single Supply, Clamping op Amps. Specified for 5V applications Power-down to 0A Output voltage clamp Large input common-mode range 0V < VCM - 1.2V Output swings to ground without saturating -3dB bandwidth 0.1dB bandwidth = 30MHz Low supply current = 5mA Slew rate = 275V/s Low offset voltage = 4mV max Output current = 100mA High open loop gain = 80dB Differential gain = 0.05%.

KS7212 : = KS7212 Timing & Sync. Generator For B/w CCD ;; Function = Timing Generator For B/w CCD Camera ;; = Compatible With Eia/ccir,built in Auto Iris Function,mirror Mode Tg,field Interlace Mode Only ;; Package = 48VQFP ;; Production Status = Mass Production.

MIC2524 : Power. MIC2524/2527 Quad Usb Power Control Switch. Quad USB Power Control Switch Not Recommended for New Designs The MIC2524 and MIC2527 are cost-effective high-side power switches with four independently controlled channels, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. The MIC2524/7 satisfies the following.

NTE186 : Silicon Complementary Transistors General Purpose Output & Driver For Audio Amplifier.

OPA2353EA : High-speed, Single-supply, Rail-to-rail Operational Amplifiers Microamplifier Series.

RF2173 : 3V GSM Power Amplifier. Typical Applications 3V GSM Cellular Handsets 3V Dual-Band/Triple-Band Handsets GPRS Compatible Product Commercial and Consumer Systems Portable Battery-Powered Equipment The is a high power, high efficiency power amplifier module offering high performance in GSM or GPRS applications. The device is manufactured on an advanced GaAs HBT process, and has been.

TA75062F : Dual Operational Amplifier.

TK84558F : . The TK84558F is general purpose dual operational amplifier, which can operate from 2V supply. It is pin-compatible with industry standard dual Op Amps, and be applied to various usages. Because super-thin type SON-8 package is used, it is the best for a portable equipment that there is a restriction in space. Input Offset Voltage Input Offset Current.

TL288CD : JFET-input Operational Amplifiers. Low Input Offset Voltage. 0.5 mV Max Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents High Input Impedance. JFET-Input Stage Internal Frequency Compensation Latch-Up-Free Operation High Slew Rate. 18 V/s Typ Low Total Harmonic Distortion 0.003% Typ These JFET-input operational amplifiers incorporate.

TS486 : Stereo Headphone Amplifier With Standby Active Low. 100mW STEREO HEADPHONE AMPLIFIER WITH STANDBY MODE s OPERATING FROM 5.5V s STANDBY MODE ACTIVE LOW or s OUTPUT POWER: @5V, 38mW HIGH (TS487) @3.3V into 16 with 0.1% THD+N max (1kHz) PIN CONNECTIONS (top view) s LOW CURRENT CONSUMPTION: 2.5mA max s High Signal-to-Noise ratio: 5V s High Crosstalk immunity: (F=1kHz) s PSRR: dB (F=1kHz), inputs grounded.

UPC4071 : Low Noise J-FET Input Operational Amplifier.

X9418 : Dual 64 Tap Xdcp,low Power Two-wire Interface, Dual Supply. Two potentiometers in one package 2-wire serial interface Register oriented format --Direct Read/Write/Transfer Wiper Position --Store as many as Four Positions per Potentiometer Power supplies --VCC to 5.5V --V+ to 5.5V --V to 5.5V Low power CMOS --Standby current < 1A --Ideal for Battery Operated Applications High reliability --Endurance100,000.

YSS231 : Graphic Equalizer.

TSC102 : Current Sense Amplifiers. High-side current sense amplifier plus signal conditioning amplifier.

 
0-C     D-L     M-R     S-Z