Details, datasheet, quote on part number: TLC25L4BCD
PartTLC25L4BCD
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyTLC25L4B LinCMOS™ Quad Operational Amplifier
DescriptionLinCMOS™ Quad Operational Amplifier 14-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload TLC25L4BCD datasheet
Quote
Find where to buy
 
Specifications 
Operating Temperature Range(C)0 to 70
Offset Drift(Typ)(uV/C)1.8
RatingCatalog
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
FeaturesN/A
Vn at 1kHz(Typ)(nV/rtHz)68
Rail-to-RailIn to V-
Slew Rate(Typ)(V/us)0.03
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
GBW(Typ)(MHz)0.085
Vos (Offset Voltage @ 25C)(Max)(mV)2
ArchitectureCMOS
Number of Channels(#)4
CMRR(Typ)(dB)94
Iq per channel(Typ)(mA)0.01
Iq per channel(Max)(mA)0.017
Input Bias Current(Max)(pA)60
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
Package GroupPDIP,SOIC
Approx. Price (US$)2.65 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G50TUBE25L4BC 3.918.651.581.27
Spice Model
TLC25L4, TLC25L4A, TLC25L4B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25L4BCN
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25L4BCN ti TLC25L4B, LinCMOS(TM) Quad Operational Amplifier
TLC25L4C
TLC25L4CD ti TLC25L4, Quad Upower Low-voltage Operational Amplifier
TLC25L4Y
TLC25LX
TLC25LXA
TLC25LXB
TLC25M2
TLC25M2A
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier

5962-87664012A : D-Type (3-State) Latches ti SN54ACT573, Octal D-type Transparent Latches With 3-State Outputs

74AC11020N : ti 74AC11020, Dual 4-Input Positive-nand Gates

LT1013DDR : ti LT1013D, Dual Precision Operational Amplifier

SN74LV163ANSR : ti SN74LV163A, 4-Bit Synchronous Binary Counters

TAS5036IPFC : Digital Audio Power Amplifiers ti TAS5036, Digital Audio PWM Processor

TNETX3110 : Fast Ethernet Thunderswitch(tm) 8/3 Ethernet(tm) Switch

TPS2100DBVT : Power MUXes ti TPS2100, 2.7-4V Dual In/single Out MOSFET, 0.5A Main/0.01A Aux Input, Act-low Enable, Comm. Temp.

TMP320C6000GDPA167 : Floating-point Digital Signal Processors

74AC11257DWRE4 : Quadruple 2-line TO 1-line DATA Selector/multiplexer WITH 3-state Outputs

SN74AS241ADWG4 : Non-Inverting Buffers and Drivers ti SN74AS241A, Octal Buffers/drivers With 3-State Outputs

PTB48510AAZ : Dc Dc Converter Power Supply - Board Mount; CONV DC/DC +-5V 6.5A 8-DIP Specifications: Type: Isolated ; Number of Outputs: 2 ; Voltage - Input (Min): 36V ; Voltage - Input (Max): 75V ; Voltage - Output 1: 5V ; Voltage - Output 2: -5V ; Voltage - Output 3: - ; Current - Output (Max): 6.5A, 6.5A ; Power (Watts) - Manufacture Series: 65W ; Voltage - Isolation: 1.5kV (1500

Same catergory

2SD1140 : NPN Epitaxial Type ( Micro Motor Drive, Hammer Drive, Switching, Power Amplifier Applications ).

5962-88760022A : ti LT1013, Dual Precision Low-power Operational Amplifier. Single-Supply Operation Input Voltage Range Extends to Ground Output Swings to Ground While Sinking Current Input Offset Voltage 150 V Max at 25C for LT1013A Offset Voltage Temperature Coefficient 2.5 V/C Max for LT1013A Input Offset Current 0.8 nA Max at 25C for LT1013A High Gain. 1.5 V/V Min (RL = 2 k), 0.8 V/V Min (RL 600 k) for LT1013A.

BA328 : Dual Amplifier For Car And Home Stereos.

BGY685AL : BGY685AL; Catv Amplifier Module. Product Supersedes data of February 1995 File under Discrete Semiconductors, SC16 1997 Apr 10 Excellent linearity Extremely low noise Silicon nitride passivation Rugged construction Gold metallization ensures excellent reliability. Hybrid high dynamic range amplifier module designed for applications in CATV systems operating over a frequency range of 40 MHz to 600 MHz operating.

DRV1101U : Line Drivers and Receivers. ti DRV1101, High Power Differential Line Driver.

HA5022 : Dual, 125MHz, Video Current Feedback Amplifier With Disable. Dual, 125MHz, Video Current Feedback Amplifier with Disable The is a dual version of the popular Intersil HA5020. It wide bandwidth and high slew rate, and is optimized for video applications and gains between 1 and is a current feedback amplifier and thus yields less bandwidth degradation at high closed loop gains than voltage feedback amplifiers.

LC7365N : DTMF Tone Generator For Pushbutton Telephone.

LMC6492 : Rail to Rail Input. LMC6492 - Dual CMOS Rail-to-rail Input And Output Operational Amplifier, Package: Soic Narrow, Pin Nb=8.

LND358 : Dualoperational Amplifier , Single Supply, 5V to 30V. The LND358 consists of two independent, high gain, internally frequency compensated operational amplifiers. They were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply.

LP311 : Low-power Differential Comparator With Strobes. Low Power Drain. 900 W Typical With 5-V Supply Operates From V or From a Single Supply as Low 3 V Output Drive Capability 25 mA Emitter Output Can Swing Below Negative Supply Response Time. 1.2 s Typ Low Input Currents: Offset Current. 2 nA Typ Bias Current. 15 nA Typ Wide Common-Mode Input Range: 13.5 V Using 15-V Supply Same Pinout LM211, LM311.

LT118 : High Speed Operational Amplifier.

LTC1563C : Active Rc, 4th Order Lowpass Filter Family. LTC1563-2/LTC1563-3 Active RC, 4th Order Lowpass Filter Family January 2000 The LTC1563-2/LTC1563-3 are a family of extremely easy-to-use, active RC lowpass filters with rail-to-rail inputs and outputs and low DC offset suitable for systems with a resolution to 16 bits. The LTC1563-2, with a single resistor value, gives a unity-gain Butterworth response.

MAX4465 : Low-Cost, Micropower, SC70/SOT23-8, Microphone Preamplifiers With Complete Shutdown.

MAX961 : Single/Dual/Quad, Ultra-High-Speed, +3V/+5V, Beyond-the-rails Comparators.

TDA2822M : Amplifiers, General.

TLV2264A : . Output Swing Includes Both Supply Rails Low Noise. 12 nV/Hz Typ = 1 kHz Low Input Bias Current. 1 pA Typ Fully Specified for Both Single-Supply and Split-Supply Operation Low Power. 500 A Max Common-Mode Input Voltage Range Includes Negative Rail Low Input Offset Voltage 950 V Max 25C (TLV226xA) Wide Supply Voltage Range 8 V Macromodel Included Available.

TLV2342Y : Lincmose Low-voltage High-speed Operational Amplifiers. Wide Range of Supply Voltages Over Specified Temperature Range: 8 V Fully Characterized 3 V and 5 V Single-Supply Operation Common-Mode Input-Voltage Range Extends Below the Negative Rail and Up to VDD at 25C Output Voltage Range Includes Negative Rail High Input Impedance. 1012 Typical ESD-Protection Circuitry Designed-In Latch-Up Immunity The TLV234x.

TPA311D : ti TPA311, 0.35-W Mono Audio Power Amplifier. D Fully Specified for 3.3-V and 5-V Operation D Wide Power Supply Compatibility D IDD V IDD 5 V BTL to SE Mode Control Integrated Depop Circuitry Thermal and Short-Circuit Protection Surface Mount Packaging SOIC PowerPAD MSOP The is a bridge-tied load (BTL) VO SHUTDOWN 1 8 single-ended (SE) audio power amplifier develBYPASS GND 2 7 oped especially.

UPC2709TB : 5 v, Super Minimold Silicon Mmic Medium Output Power Amplifier. 5 V, SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER The is a silicon monolithic integrated circuits designed 1st IF amplifier for DBS tuners. This IC is packaged in super minimold package which is smaller than conventional minimold. The PC2709TB has compatible pin connections and performance PC2709T of conventional minimold version. So, in the case.

EMIF10-1K010F2 : EMI FILTER INCLUDING ESD PROTECTION. MAIN PRODUCT CHARACTERISTICS: Where EMI filtering in ESD sensitive equipment is required Mobile phones and communication systems Computers, printers and MCU Boards The is a highly integrated devices designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interferences. The EMIF10 flip chip packaging means the package size is equal.

 
0-C     D-L     M-R     S-Z