Details, datasheet, quote on part number: TLC25L4CD
PartTLC25L4CD
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyTLC25L4 Quad uPower Low-Voltage Operational Amplifier
DescriptionQuad uPower Low-Voltage Operational Amplifier 14-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload TLC25L4CD datasheet
Quote
Find where to buy
 
Specifications 
Vos (Offset Voltage @ 25C)(Max)(mV)10
Operating Temperature Range(C)0 to 70
Offset Drift(Typ)(uV/C)1.8
RatingCatalog
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
FeaturesN/A
Vn at 1kHz(Typ)(nV/rtHz)68
Rail-to-RailIn to V-
Slew Rate(Typ)(V/us)0.03
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
GBW(Typ)(MHz)0.085
Approx. Price (US$)2.42 | 1ku
ArchitectureCMOS
Number of Channels(#)4
CMRR(Typ)(dB)94
Iq per channel(Typ)(mA)0.01
Iq per channel(Max)(mA)0.017
Input Bias Current(Max)(pA)60
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
Package GroupPDIP,SOIC
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G50TUBETLC25L4C 3.918.651.581.27
Spice Model
TLC25L4, TLC25L4A, TLC25L4B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25L4CDB
TLC25L4CDR
TLC25L4CN
TLC25L4CPW
TLC25L4CPWR
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25L4CDB ti TLC25L4, Quad Upower Low-voltage Operational Amplifier
TLC25L4Y
TLC25LX
TLC25LXA
TLC25LXB
TLC25M2
TLC25M2A
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier
TLC25M4C
TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier

5962-0051202QHA : Single, Low Power, Rail-to-rail Input/output Operational Amplifier W/shutdown

SN74LS465 : Bipolar->LS Family Octal Buffers With 3-state Outputs

SNJ55ALS195FK : ti SN55ALS195, Quadruple Differential Line Receiver

TLV2324IPWLE : ti TLV2324, Quad Low-voltage Micropower Operational Amplifier

TLV2463I : Family of Low-power Rail-to-rail Input/output op Amps With Shutdown

SN74LS151NSRG4 : Multiplexers ti SN74LS151, 8-Line to 1-Line Data Selectors/multiplexers

CD74HC4017QPWREP : High-speed CMOS Logic BCD to 7-segment Latch/decoder/driver for LCDs

UC3851NG4 : Pmic - Ac Dc Converters, Offline Switcher Integrated Circuit (ics) Tube 8 V ~ 32 V; IC OFFLINE CTRLR PWM PROG 18DIP Specifications: Packaging: Tube ; Package / Case: 18-DIP (0.300", 7.62mm) ; Power (Watts): 1W ; Voltage - Input: 8 V ~ 32 V ; Voltage - Output: 40V ; Frequency Range: 45kHz ~ 55kHz ; Operating Temperature: 0C ~ 70C ; Output Isolation: Either ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compli

TPS22901EVM : Eval Board - Dc/dc & Ac/dc (off-line) Smp Programmers, Development System; EVAL MODULE FOR TPS22901 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

UCC24650DBVT : IC REG CTRLR FLYBK ISO Specifications: Family: PMIC - Power Supply Controllers, Monitors ; Series: - ; Packaging  : Cut Tape (CT)   ; Applications: Wake Up Monitor ; Voltage - Input: - ; Voltage - Supply: 4.5 V ~ 28 V ; Current - Supply: 63A ; Operating Temperature: -40C ~ 125C ; Mounting Type: Surf

Same catergory

2SD2385 : NPN Triple Diffused Type ( Power Amplifier Applications ).

AD9631 : Ultralow Distortion, High Speed op Amp, Stable at Gain of 1. Ultralow Distortion, Wide Bandwidth Voltage Feedback Op Amps AD9631/AD9632 FUNCTIONAL BLOCK DIAGRAM 8-Pin Plastic Mini-DIP (N), Cerdip (Q), and SO (R) Packages Wide Bandwidth = +2 Small Signal 320 MHz 250 MHz Large Signal (4 V p-p) 175 MHz 180 MHz Ultralow Distortion (SFDR), Low Noise 113 dBc typ @ 1 MHz 95 dBc typ @ 5 MHz 72 dBc typ @ 20 MHz +46 dBm 3rd Order.

DRV104PWPR : PWM Solenoid/Valve Drivers. ti DRV104, PWM High-side Driver (1.5A) For Solenoids, Coils, Valves, Heaters, And Lamps.

FP310L100 : Contactless Potentiometer. Devoid of friction and abrasion at contact point No electrical contact noise Insensitive to contamination, moisture ingression, corrosion and vibration Low operating torque Long lifetime Typical applications Angular encoder Electric vehicles The contactless potentiometer comprises a GaAs Hall effect sensor actuated by two permanent magnets which are mounted.

KIA6220H : Bipolar Linear Integrated Circuit ( 30w BTL Dual Audio Power Amplifier ).

KM44C1000D : 1m X 4bit CMOS Dynamic RAM With Fast Page Mode. x 4Bit CMOS Dynamic RAM with Fast Page Mode This is a family x 4bit Fast Page Mode CMOS DRAMs. Fast Page Mode offers high speed random access of memory cells within the same row. Power supply voltage or +3.3V), access time or -7), power consumption(Normal or Low power), and package type (SOJ or TSOP-II) are optional of this family. All of this family.

LF355AN8 : JFET-input Operational Amplifiers Low Supply Current High Speed.

LM306 : . Fast Response Times Improved Gain and Accuracy Fanout to 10 Series 54/74 TTL Loads Strobe Capability Short-Circuit and Surge Protection Designed to Be Interchangeable With National Semiconductor LM306 The is a high-speed voltage comparator with differential inputs, a low-impedance highsink-current (100 mA) output, and two strobe inputs. This device.

MDC5101 : Antenna Switch Control. The MDC5101 inputs TxE and RxE Logic Signals with an accessory input termination option and, allows positive and negative control voltages in accordance with the enclosed truth table. This device is primarily intended to control GaAs RF switches. It is also designed to interface with most HCMOS MCUs such as the ON Semiconductor MC68338. The MDC5101.

OPA743 : . q HIGH SPEED: 10V/s q RAIL-TO-RAIL INPUT AND OUTPUT q WIDE SUPPLY RANGE: Single Supply: to 12V Dual Supplies: 6V q LOW QUIESCENT CURRENT: 1.1mA q FULL-SCALE CMRR: 84dB q MicroSIZE PACKAGES: TSSOP-14 q LOW INPUT BIAS CURRENT: 1pA The OPA743 series utilizes a state-of-the-art 12V analog CMOS process and offers outstanding AC performance, such as 7MHz.

TAA762 : Single Operational Amplifiers. Wide common-mode range Large supply voltage range Large control range Wide temperature range (TAA 762) High output frequency compensation Open collector output P-DIP-6-1 Applications Particularly economic and versatile op amps. Owing to their excellent performance qualities they are well suited for a wide scope of applications, as in control engineering,.

THS4021CD : ti THS4021, 350-MHz Ultra-low Noise Voltage-feedback Amplifier. The THS4021 and THS4022 are ultra-low voltage noise, high-speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communication and imaging. The signal-amplifier THS4021 and the dual-amplifier THS4022 offer very good ac performance with 350-MHz bandwidth, 470-V/s slew rate, and 40-ns settling time (0.1%).

W170 : Spread Aware, Frequency Multiplier And Zero Delay Buffer. Spread AwareTM, Frequency Multiplier and Zero Delay Buffer Spread AwareTM--designed to work with SSFTG reference signals Two outputs Configuration options allow various multiplication of the reference frequency, refer to Table 1 to determine the specific option which meets your multiplication needs Available in 8-pin SOIC package Table 1. Configuration.

LMP2011 : Single High Precision Rail-to-Rail Output Operational Amplifier The LMP201x series are the first members of National's new LMPTM precision amplifier family. The LMP201X series offers unprecedented accuracy and stability in space-saving miniature packaging while also being offered at an affordable price. This device utilizes patented techniques to measure.

HMC-C048 : LOW NOISE AMPLIFIER MODULE, 5 - 9 GHz The HMC-C048 is a GaAs MMIC PHEMT Low Noise A m p l i i e r i n a m i n i a t u r e , h e r m e t i c m o d u l e w h i c h operates between 5 and 9 GHz. This high dynamic range low noise amplii er module provides 24 dB of gain and up to +25 dBm of output IP3 while oper- ating from a single positive supply between.

AD8228 : Precision Instrumentation Amplifier Fixed G = 10, 100 The AD8228 is a high performance instrumentation amplifier with very high gain accuracy and low drift. Because all gain-setting resistors are internal and laser trimmed, gain accuracy and gain drift are higher than can be achieved with typical instrumentation amplifiers. The AD8228 provides excellent.

MCP6291 : Op Amps Rail-to-Rail Input/Output. Gain Bandwidth Product: 10 MHz (typical) Supply Current: 1.0 mA Supply Voltage: to 6.0V Rail-to-Rail Input/Output Extended Temperature Range: to +125C Available in Single, Dual and Quad Packages Single with CS (MCP6293) Dual with CS (MCP6295) The Microchip Technology Inc. MCP6291/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth.

OPA140ATDD2 : High-Precision, Low-Noise, Rail-to-Rail Output, 11MHz JFET Op Amp The OPA140A operational amplifier is a low-power JFET input amplifier that good drift and low input bias current. The rail-to-rail output swing and input range that includes VEUR" allow designers to take advantage of the low-noise characteristics of JFET amplifiers while also interfacing.

 
0-C     D-L     M-R     S-Z