|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M2 Dual Low-Power Low-Voltage Operational Amplifier|
|Description||Dual Low-Power Low-Voltage Operational Amplifier 8-SOIC 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M2 datasheet
|Cross ref.||Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA|
|Vos (Offset Voltage @ 25C)(Max)(mV)||10|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Approx. Price (US$)||1.75 | 1ku|
|Iq per channel(Max)(mA)||0.28|
|Input Bias Current(Max)(pA)||60|
|Number of Channels(#)||2|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M2, TLC25M2A, TLC25M2B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)description
The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.
AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70°C.
These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJMAX = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier|
|TLC25M2B Lincmose Dual Operational Amplifiers|
|TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier|
|TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier|
|TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
5962-8776601RA : ti SN54AS804B, Hex 2-Input NAND Drivers
5962-9204601M2A : Oscillators ti SN54LS628, Voltage-controlled Oscillators
CY74FCT823ATQCT : D-Type (3-State) Flip-Flops ti CY74FCT823T, 9-Bit Bus Interface Flip-flops With 3-State Outputs
MAX202CDWR : ti MAX202, 5-V Dual RS-232 Line Driver/receiver With +/-15 KV Esd Protection
SN74F169 : Bipolar->F Family 4-bit Synchronous Binary Up/down Counter
SN74LS365ADRG4 : Quadruple 2-input Multiplexers WITH Storage
SN74ALS2541NSRG4 : Non-Inverting Buffers and Drivers ti SN74ALS2541, Octal Line Drivers With 3-State Outputs
TLC5620INE4 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Single Supply; IC DAC 8BIT QUAD V-OUT 14-DIP Specifications: Data Interface: Serial ; Number of Bits: 8 ; Operating Temperature: -40°C ~ 85°C ; Package / Case: 14-DIP (0.300", 7.62mm) ; Packaging: Tube ; Voltage Supply Source: Single Supply ; Settling Time: 10µs ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
AD8017 : -. High Output Drive Capability 20 V p-p Differential Output Voltage, 10 V p-p Single-Ended Output Voltage While Delivering a 25 Load Low Power Operation +12 V Voltage Supply @ 7 mA/Amplifier Low Distortion 78 dBc @ 500 kHz SFDR, = 100 p-p 58 dBc Highest Harmonic @ 1 MHz, 270 mA (RL 10 ) High Speed 160 MHz, 3 dB Bandwidth V/ s Slew Rate APPLICATIONS.
BGE787B : BGE787B; Catv Amplifier Module. Excellent linearity Extremely low noise High gain Excellent return loss properties. APPLICATIONS Single module line extender in CATV systems operating in the to 750 MHz frequency range. Hybrid high dynamic range amplifier module operating at a supply voltage 24 V (DC) a SOT115J package. The module consists of two cascaded stages both in cascode configuration.
LMF60CIN-100 : Lmf60 High Performance 6th-order Switched Capacitor Butterworth Lowpass Filter.
LT1352 : LT1352, Dual 250µA, 3MHz, 200V/µs Operational Amplifier. The LT ®1352/LT1353 are dual and quad, very low power, high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply current and higher slew rate than devices with comparable bandwidth. The circuit combines the slewing performance of a current feedback amplifier in a true operational amplifier with.
OPA2107AP : ti OPA2107, Precision Dual DiFET(R) Operational Amplifier. Very Low Noise: at 10kHz Low VOS: 1mV max Low Drift: 10µV/°C max Low IB: 10pA max Fast Settling Time: to 0.01% Unity-Gain Stable APPLICATIONS Data Acquisition DAC Output Amplifiers Optoelectronics High-Impedance Sensor Amps High-Performance Audio Circuitry Medical Equipment, CT Scanners The OPA2107 dual operational amplifier provides precision Difet.
SA5217D : SA5217; Postamplifier With Link Status Indicator;; Package: SOT163 (SO20).
TL061 : Low Power Single JFET Op-amps. s LOW INPUT BIAS AND OFFSET CURRENTS s OUTPUT SHORT-CIRCUIT PROTECTION s HIGH INPUT IMPEDANCE J-FET INPUT s INTERNAL FREQUENCY COMPENSATION s LATCH UP FREE OPERATION s HIGH SLEW RATE 3.5V/ µs The TL061, TL061A and TL061B are high speed J-FET input single operational amplifiers family. Each of these J-FET input operational amplifiers incorporates well.
uA9638CP : Dual High-speed Differential Line Driver. Meets or Exceeds ANSI Standard EIA/ TIA-422-B Operates From a Single 5-V Power Supply Drives Loads as Low to 15 Mbps TTL- and CMOS-Input Compatibility Output Short-Circuit Protection Interchangeable With National SemiconductorTM DS9638 The is a dual high-speed differential line driver designed to meet ANSI Standard EIA / TIA-422-B. The inputs are TTL and CMOS.
UCC3585 : Power. Low Voltage Synchronous Buck Controller. D VOUT Resistor Programmable Down or 5.0-V Input Supply 1% DC Accuracy D High Efficiency Synchronous Switching D Drives P-Channel (High Side) and N-Channel D (Low Side) MOSFETs Lossless Programmable Current Limit Logic Compatible Shutdown The UCC3585 synchronous buck controller provides flexible high efficiency power conversion for output voltages as low 0.9 V with.
UPC4092 : J-FET Input Low-offset Dual Operational Amplifier. J-FET INPUT LOW-OFFSET DUAL OPERATIONAL AMPLIFIER The µPC4092 dual operational amplifier offers high input impedance, low offset voltage, high slew rate, and stable AC operating characteristics. NEC's unique high-speed PNP transistor = 300 MHz) in the output stage solves the oscillation problem of current sinking with a large capacitive load. Zener-zap.
UTC4052 : = Dual 4-CH Analog Multiplexers/demultiplexers ;; Package = DIP-16, SOP-16 ;;.
UPG2024TQ : NEC's GaAs MMIC DPDT Switches For 5 GHz Band Wireless LAN NEC's UPG2024TQ is a GaAs MMIC DPDT switch for 5 GHz band wireless LAN. Low insertion loss and high handling power contribute to user's system design..
LMH1981 : The LMH1981 is a high performance multi-format sync separator ideal for use in a wide range of video applications, such as broadcast and professional video equipment and HDTV/DTV systems. The input accepts standard analog SD/ED/HD video signals with either bi-level or tri-level sync, and the outputs provide all of the critical timing signals in CMOS.
ADG1201 : Low Capacitance, Low Charge Injection, ±15 V/+12 V ICMOS SPST In SOT-23 The ADG1201/ADG1202 are monolithic complementary metal-oxide semiconductor (CMOS) devices containing an SPST switch designed in an iCMOS® (industrial CMOS) process. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar technologies. It enables the development.
ISL28408 : 40V Precision Single Supply Rail-Rail Output Low Power Operational Amplifiers The ISL28108, ISL28208 and ISL28408 are single, dual and quad low power precision amplifiers optimized for single supply applications. These devices feature a common mode input voltage range extending to 0.5V below the V- rail, a rail-to-rail differential input voltage range.