Details, datasheet, quote on part number: TLC25M2A
PartTLC25M2A
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyTLC25M2A LinCMOS Dual Operational Amplifier
DescriptionLinCMOS Dual Operational Amplifier 8-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload TLC25M2A datasheet
Cross ref.Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA
Quote
Find where to buy
 
Specifications 
Offset Drift(Typ)(uV/C)1.7
Operating Temperature Range(C)0 to 70
Vn at 1kHz(Typ)(nV/rtHz)32
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
Iq per channel(Typ)(mA)0.105
FeaturesN/A
RatingCatalog
Rail-to-RailIn to V-
Approx. Price (US$)1.84 | 1ku
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
Iq per channel(Max)(mA)0.28
Vos (Offset Voltage @ 25C)(Max)(mV)5
Input Bias Current(Max)(pA)60
ArchitectureCMOS
Number of Channels(#)2
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
CMRR(Typ)(dB)91
Package GroupPDIP,SOIC
GBW(Typ)(MHz)0.525
Slew Rate(Typ)(V/us)0.4
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DSOICR-PDSO-G75TUBE25M2AC 3.914.91.581.27
Spice Model
TLC25M2, TLC25M2A, TLC25M2B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)

description

The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.

AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70C.

These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJMAX = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25M2AC
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25M2AC
TLC25M2ACD ti TLC25M2A, Lincmos Dual Operational Amplifier
TLC25M2B Lincmose Dual Operational Amplifiers
TLC25M2BC
TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier
TLC25M2C
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier
TLC25M4C
TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier
TLC25M4Y
TLC25MX
TLC25MXA
TLC25MXB
TLC25X
TLC25XA

PT7756C : Plug-in Power Solutions->Non-Isolated->Single Posi ti PT7756, 6.6 to 12.8Vout 15Amp 24V-Input 'Big-Hammer III' Programmable Isr

SN74LVC06AD : ti SN74LVC06A, Hex Inverter Buffers/drivers With Open-drain Outputs

SN74LVCZ16245ADL : Standard Transceivers ti SN74LVCZ16245A, 16-Bit Bus Transceiver With 3-State Outputs

TLC7705MFK : Micropower Supply Voltage Supervisors

SN74AHCT245RGYRG4 : HEX Inverters

TMS470R1VF338APZA : 16/32-bit RISC Flash Microcontrollers

OPA2344UA/2K5G4 : ti OPA2344, Low Power, Single-Supply, Rail-to-rail Operational Amplifiers MicroAmplifier(TM) Ser

TPS65917EVM : Power Management IC Development Tools TPS65917-Q1 Power Management IC Evaluation Module

Same catergory

A3518 : . RATIOMETRIC, LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION The A3517xUA and A3518xUA are sensitive, temperature-stable linear Hall-effect sensors with greatly improved offset characteristics. Ratiometric, linear Hall-effect sensors provide a voltage output that is proportional to the applied magnetic field and have a quiescent output voltage.

ADG749 : CMOS Low Voltage SPDT Switch in SC-70 Package. 5.5 V Single Supply 5 (Max) On Resistance 0.75 (Typ) On-Resistance Flatness 3 dB Bandwidth >200 MHz Rail-to-Rail Operation 6-Lead SC70 Package Fast Switching Times ns t OFF 6 ns Typical Power Consumption (<0.01 W) TTL/CMOS-Compatible APPLICATIONS Battery-Powered Systems Communication Systems Sample Hold Systems Audio Signal Routing Video Switching.

HA-5142 : Dual. Dual, 400kHz, Ultra-low Power Operational Amplifier. The HA-5142 ultra-low power operational amplifier provides AC and DC performance characteristics similar to or better than most general purpose amplifiers while only drawing 1/30 of the supply current of most general purpose amplifiers. In applications which require low power dissipation and good AC electrical characteristics, this device offers the industry's.

LC7823 : Analog Function Switch.

LF411CD : ti LF411, Precision JFET-input Operational Amplifier. Low Input Bias Current, 50 pA Typ Low Input Noise Current, 0.01 pA/Hz Typ Low Supply Current, 2 mA Typ High Input impedance, 1012 Typ Low Total Harmonic Distortion Low 1/f Noise Corner, 50 Hz Typ Package Options Include Plastic Small-Outline (D) and Standard (P) DIPs This device is a low-cost, high-speed, JFET-input operational amplifier with very low input.

LF412 : Dual Low-offset BiFET op Amp: Dual. Low Input Bias Current. 50 pA Typ Low Input Noise Current 0.01 pA/Hz Typ Low Supply Current. 4.5 mA Typ High Input impedance. 1012 Typ Internally Trimmed Offset Voltage Wide Gain Bandwidth. 3 MHz Typ High Slew Rate. 13 V/s Typ This device is a low-cost, high-speed, JFET-input operational amplifier with very low input offset voltage and a specified.

LMV339 : General-purpose Low-voltage Comparators. LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS 2.7-V and 5-V Performance Low Supply Current: 60 A Typ 100 A Typ 170 A Typ Input Common-Mode Voltage Range Includes Ground Low Output Saturation Voltage. 200 mV Typ The LMV393 and LMV339 devices are low-voltage 5.5 V) versions of the dual and quad comparators, LM393 and LM339,.

MIC705 : Power. MIC705/6/7/8 µP Supervisory Circuits.

OPA2355 : . UNITY-GAIN BANDWIDTH: 450MHz WIDE BANDWIDTH: 200MHz GBW HIGH SLEW RATE: 360V/s LOW NOISE: 5.8nV/Hz EXCELLENT VIDEO PERFORMANCE: DIFF GAIN: 0.02%, DIFF PHASE: 0.05 0.1dB GAIN FLATNESS: 75MHz INPUT RANGE INCLUDES GROUND RAIL-TO-RAIL OUTPUT (within 100mV) LOW INPUT BIAS CURRENT: 3pA LOW SHUTDOWN CURRENT: 3.4A ENABLE/DISABLE TIME: 100ns/30ns THERMAL.

PAC201QT : P/active Emi/rfi T Filter.

SAA7187 : SAA7187; Digital Video Encoder (DENC2-SQ). Preliminary File under Integrated Circuits, IC22 1995 Sep 21 CMOS 5 V device Digital PAL/NTSC encoder System pixel frequency selectable for 12.27 MHz (60 Hz fields) or 14.75 MHz (50 Hz fields) 24-bit wide YUV input port or 16-bit wide YUV input port or Input data format Cb, Y, Cr, etc. (CCIR 656) I2C-bus control port MPU parallel control port Encoder.

TDA3562A : Pal/ntsc One-chip Decoder. CHROMINANCE SIGNAL PROCESSOR LUMINANCE SIGNAL PROCESSING WITH CLAMPING HORIZONTAL AND VERTICAL BLANKING LINEAR TRANSMISSION OF INSERTED RGB SIGNALS LINEAR CONTRAST AND BRIGHTNESS CONTROL ACTING ON INSERTED AND MATRIXED SIGNALS AUTOMATIC CUT-OFF CONTROL NTSC HUE CONTROL The is a monolithic IC designed as decode PAL and/or NTSC colour television standards.

UCC38503 : Power. Controls Boost Preregulator to Near-Unity Power Factor Accurate Power Limiting Improved Feedforward Line Regulation Peak Current-Mode Control in Second Stage Programmable Oscillator Leading-Edge/Trailing-Edge Modulation for Reduced Output Ripple Low Start-up Supply Current Synchronized Second Stage Start-Up, with Programmable Soft-start Programmable.

MP400 : 10V-50V, High Speed Power Amplifier With Integrated Switch Mode Power Supply The MP400 is a board-level module power op amp that integrates the performance of a high speed op amp with a switch mode power supply. The result is a high voltage driver that delivers adjustable output voltages from 50V-350V off of low, standard buss supplies of 12V, 24V and 48V.

SGM8052 : SGM8052 Is Rail?to?rail Output Voltage Feedback Amplifiers The SGM8052 is rail?to?rail output voltage feedback amplifiers offering ease of use and low cost. It has bandwidth and slew rate typically found in current feedback amplifiers. It has a wide input common?mode voltage range and output voltage swing, making it easy to use on single supplies as low as 2.5 V. Despite.

LT5400 : Quad Matched Resistor Network The LT®5400 is a quad resistor network with excellent matching s over the entire temperature range. All four resistors can be accessed and biased independently, making the LT5400 a convenient and versatile choice for any application that can benefit from matched resistors..

 
0-C     D-L     M-R     S-Z