|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M2A LinCMOS Dual Operational Amplifier|
|Description||LinCMOS Dual Operational Amplifier 8-PDIP 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M2ACP datasheet
|Cross ref.||Similar parts: OP295GP, LF147, LF147JAN, LF147QML, LF156JAN, LF256, LF347, LF347-N, LF347B|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Approx. Price (US$)||1.84 | 1ku|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Iq per channel(Max)(mA)||0.28|
|Vos (Offset Voltage @ 25C)(Max)(mV)||5|
|Input Bias Current(Max)(pA)||60|
|Number of Channels(#)||2|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M2, TLC25M2A, TLC25M2B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)description
The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.
AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70°C.
These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJMAX = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M2B Lincmose Dual Operational Amplifiers|
|TLC25M2BCD ti TLC25M2B, LinCMOS(TM) Dual Operational Amplifier|
|TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier|
|TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
BQ4015MS-85N : 512kx8 Nonvolatile SRAM
PCI7421 : Integrated Dual-socket Ultramedia PC Card Controller, Ieee 1394 Open Hci Host Controller And Phy, an
PT6913 : Non-Isolated DC-DC Converters
SN54BCT25245W : 25ohm Octal Bus Transceivers With 3-state Outputs
SN74AHCT540PW : Inverting Buffers and Drivers ti SN74AHCT540, Octal Buffers/drivers With 3-State Outputs
TIBPAL16R4-7MFKB : PALs ti TIBPAL16R4-7M, High-performance Impact-X<TM> PAL<R> Circuits
UC2843ADWTR : Current Mode ti UC2843A, Current Mode PWM Controller
TMP422AIDCNR : /-1 degreeC Remote/Local TEMPERATURE SENSOR w/N-Factor and Series Res Corr The TMP421 and TMP422 are remote temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes
1P1G125QDCKRG4Q1 : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tape & Reel (TR) 24mA, 24mA 1.65 V ~ 5.5 V; IC BUS BUFF TRI-ST N-INV SC70-5 Specifications: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: 6-TSSOP (5 Lead), SC-88A, SOT-353 ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Bits per Element: 1 ; Number of Elements: 1 ; Operating Temperature: -40°C ~ 125°C ; Voltage - Supply: 1.65 V
CDCLVD1212RHAT : Clock/timing - Clock Buffers, Driver Integrated Circuit (ics) Fanout Buffer (Distribution), Multiplexer Tape & Reel (TR) 2.375 V ~ 2.625 V; IC CLK BUFFER LVDS 2:12 40VQFN Specifications: Type: Fanout Buffer (Distribution), Multiplexer ; Frequency - Max: 800MHz ; Input: LVCMOS, LVDS, LVPECL ; Output: LVDS ; Voltage - Supply: 2.375 V ~ 2.625 V ; Package / Case: 40-VFQFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Comp
CD40257BME4 : Logic - Signal Switches, Multiplexers, Decoder Integrated Circuit (ics) Surface Mount Tube 6.8mA, 6.8mA Dual Supply; IC DATA SELECT/MUX QUAD 16-SOIC Specifications: Circuit: 4 x 1 2 ; Independent Circuits: 1 ; Mounting Type: Surface Mount ; Current - Output High, Low: 6.8mA, 6.8mA ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Type: Data Selector/Multiplexer ; Voltage Supply Source: Dual Supply ; Operating Temperature: -55°
SN75173NE4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Receiver Tube 4.75 V ~ 5.25 V; IC QUAD DIFF LINE RCVR 16-DIP Specifications: Number of Drivers/Receivers: 0/4 ; Type: Line Receiver ; Voltage - Supply: 4.75 V ~ 5.25 V ; Package / Case: 16-DIP (0.300", 7.62mm) ; Packaging: Tube ; Protocol: RS485 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant