Details, datasheet, quote on part number: TLC25M2C
PartTLC25M2C
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers => General Purpose => Dual
Description
CompanyTexas Instruments, Inc.
DatasheetDownload TLC25M2C datasheet
Quote
Find where to buy
 
  

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)

description

The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.

AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70C.

These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJMAX = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25M2BC
TLC25M2Y
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25M2CD ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier
TLC25M2Y
TLC25M4
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier
TLC25M4C
TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier
TLC25M4Y
TLC25MX
TLC25MXA
TLC25MXB
TLC25X
TLC25XA
TLC25XB
TLC2652
TLC2652A
TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652AC
TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier

PT6700 : 13 Amp Programmable Integrated Switching Regulator

SN74BCT8373ANT : ti SN74BCT8373A, Ieee STD 1149.1 (JTAG) Boundary-scan Test Device With Octal D-type Latches

SN74CBT3244CDBQR : Standard Bus Switches ti SN74CBT3244C, Octal Fet Bus Switch With -2 V Undershoot Protection

SN74HC7002N : ti SN74HC7002, Quadruple Positive-nOR GATEs With Schmitt-trigger Inputs

TL034MJB : ti TL034, Quad Enhanced JFET Low-power Precision Operational Amplifier

TPS2063D : Current Limited, Power-distribution Switches

TPS2086 :

SN74AHC132DGVRG4 : HEX Inverters

TPS71530DCKR : Single Output LDO, 50mA, Fixed(3.0V), High Input Voltage, Low Quiescent Current The TPS715xx low-dropout (LDO) voltage regulators offer thebenefits of high input voltage, low-dropout voltage, low-power operation, and miniaturized packaging. The devices, which operate over an input range of 2.5 V to

TRS222CDWR : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tape & Reel (TR) 4.5 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 18SOIC Specifications: Number of Drivers/Receivers: 2/2 ; Type: Line Transceiver ; Voltage - Supply: 4.5 V ~ 5.5 V ; Package / Case: 18-SOIC (0.295", 7.50mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

PTH03060WAD : Dc Dc Converter Power Supply - Board Mount; MODULE PIP 10A 3.3V T/H 10-DIP Specifications: Type: Non-Isolated (POL) ; Number of Outputs: 1 ; Voltage - Input (Min): 2.95V ; Voltage - Input (Max): 3.65V ; Voltage - Output 1: 0.8 ~ 2.5 V ; Voltage - Output 2: - ; Voltage - Output 3: - ; Current - Output (Max): 10A ; Power (Watts) - Manufacture Series: 25W ; Voltage - Isolatio

ISO7810DWR : Digital Isolators High-Immunity, 5.7kVRMS Reinforced Single-Channel 1/0 Digital Isolator, 100Mbps 16-SOIC -55 to 125 Texas Instruments ISO7810 Single-Channel Digital Isolators are single-channel digital isolators with 8000VPK isolation voltage. These devices have reinforced isolation certifications according to VDE, CSA, and CQC. Each isolator provides high electro-magnetic immunity. They also have low emission

 
0-C     D-L     M-R     S-Z