|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M2 Dual Low-Power Low-Voltage Operational Amplifier|
|Description||Dual Low-Power Low-Voltage Operational Amplifier 8-SOIC 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M2CD datasheet
|Cross ref.||Similar parts: TLC25M2A|
|Vos (Offset Voltage @ 25C)(Max)(mV)||10|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Approx. Price (US$)||1.75 | 1ku|
|Iq per channel(Max)(mA)||0.28|
|Input Bias Current(Max)(pA)||60|
|Number of Channels(#)||2|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M2, TLC25M2A, TLC25M2B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)description
The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.
AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70°C.
These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJMAX = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M2CDR ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier|
|TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
|TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
2N5911-12 : Dual N-channel JFET High Frequency Amplifier. Dual N-Channel JFET High Frequency Amplifier ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Gate-Drain or Gate-Source Voltage. -25V Gate Current. 50mA Storage Temperature Range. to +200oC Operating Temperature Range. to +150oC Lead Temperature (Soldering, 10sec). +300oC Power Dissipation Derate above 25oC Tight Tracking Low Insertion.
A42L8316V : 256k X 16 CMOS Dynamic RAM With Edo Page Mode. Document Title X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History n Organization: 262,144 words X 16 bits n Part Identification A42L8316 (512 Ref.) n Single 3.3V power supply/built-in VBB generator n Low power consumption - Operating: 110mA (-30 max) - Standby: 2.5mA (TTL), 1.5mA (CMOS) 1.0mA (Self-refresh current) n High speed 30/35/40 ns RAS access.
AD9884 : Triple 8-Bit, 140 MSPS ADC, RGB Graphics Digitizer For Sxga LCD Monitors.
CAT5259 : Quad 256-Tap DPP With 2-wire Interfacethe CAT5259 is Four Digitally Programmablepotentiometers (DPPs ) Integrated With Control Logicand 16 Bytes of Nvram Memory. Each DPP Consists Ofa Series of Resistive Elements Connected Between Twoexternally Accessible End Points. The Tap Points Betweeneach Resistive Element Are Connected to The Wiper Outputswith.
LC89610 : Mini-disk Decoder Lsi. The is a playback signal processing CMOS LSI that supports the mini-disk data format. Data that has been decoded a CD decoder, an ACIRC decoder, or a CDROM decoder circuit is passed to a DRAM controller circuit and the LC89610 uses external DRAM to process shock proof. The shock proof processed data is passed to an audio data decoding LSI, the LC89602.
LMC7215IM : LMC7215 - Micro-Power, Rail-to-rail CMOS Comparators With Open-drain/push-pull Outputs And Tinypak Package, Package: Soic Narrow, Pin Nb=8.
MX829 : Baseband Signal Processor. Rx Audio Processing Tx Audio Processing 1200/2400 Baud Modem DTMF Encoder Low Voltage Operation "C-BUS" Compatible Host µC Interface Applications ETS/MPT/PAA Standards Compatible LMR/PAMR/PMR Trunked Systems Multi-standard Modem Formats AUDIO PROCESSOR MSK MODEM DTMF ENCODER SERIAL BUS: DATA & CONTROL LEVEL & VOLUME CONTROLS The is a low voltage CMOS.
NJM2730 : Low Supply Voltage Single Operational Amplifier With Full Swing Input And Output.
TLC083A : . TLC085, TLC08xA FAMILY OF WIDE-BANDWIDTH HIGH-OUTPUT-DRIVE SINGLE SUPPLY OPERATIONAL AMPLIFIERS Wide Bandwidth. 10 MHz High Output Drive IOH. mA at VDD V IOL. 0.5 V High Slew Rate SR+. 16 V/µs SR. 19 V/µs Wide Supply Range. 16 V Supply Current. 1.9 mA/Channel Ultralow Power Shutdown Mode IDD. 125 µA/Channel Low Input Noise Voltage. 8.5 nVHz.
X9448Y : Dual Smart Comparators With 2-wire Interface. Dual Digitally Controlled Potentiometer (XDCPTM) & Voltage Comparator Two digitally controlled potentiometers and two voltage comparators in one package 2-wire serial interface Register oriented format --Direct read/write wiper position --Store as many as four positions per pot Fast response comparator Enable, latch, or shutdown comparator outputs through.
LM2903 : Comparators Low power quad operational amplifier. Wide single supply voltage range or dual supplies to ±18V Very low supply current (0.4mA) independent of supply voltage at +5V) Low input bias current: 25nA typ. Low input offset current: ±5nA typ. Input common-mode voltage range includes negative rail Low output saturation voltage: 250mV typ. (IO = 4mA) Differential input voltage range equal to the supply.
SGM3005 : The SGM3005 Is A Dual, Low ON-resistance, Low Voltage, Single-pole/double-throw (SPDT) The SGM3005 is a dual, low ON-resistance, low voltage, single-pole/double-throw (SPDT) CMOS analog switches designed to operate from a single +1.8V to +5.5V supply. Targeted applications include battery powered equipment that benefit from low RON (0.5?) and fast switching.
ADG852 : 0.8 ? CMOS, 2.3 V To 5.5 V, SPDT/2:1 Mux Mini LFCSP The ADG852 is a low voltage CMOS single-pole, double-throw (SPDT) switch. This device offers ultralow on resistance of less than 1 ? over the full temperature range. The ADG852 is fully specified for 5.5 V and 3.3 V supply operation. Each switch conducts equally well in both directions when on, and has an input.
LTC6417 : 1.6GHz Low Noise High Linearity Differential Buffer/16-Bit ADC Driver With Fast Clamp The LTC6417 is a differential unity gain buffer that can drive a 50? load with extremely low noise and excellent linearity. It is well suited for driving high speed 14- and 16-bit pipeline ADCs with input signals from DC to beyond 600MHz. Differential input impedance.