|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M2 Dual Low-Power Low-Voltage Operational Amplifier|
|Description||Dual Low-Power Low-Voltage Operational Amplifier 8-PDIP 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M2CP datasheet
|Cross ref.||Similar parts: OP295GP, LF147, LF147JAN, LF147QML, LF156JAN, LF256, LF347, LF347-N, LF347B|
|Vos (Offset Voltage @ 25C)(Max)(mV)||10|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Approx. Price (US$)||1.75 | 1ku|
|Iq per channel(Max)(mA)||0.28|
|Input Bias Current(Max)(pA)||60|
|Number of Channels(#)||2|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M2, TLC25M2A, TLC25M2B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 30 nV/Hz Typ = 1 kHz (High-Bias Versions)description
The TLC252, TLC25L2, and TLC25M2 are OUT IN low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in a degradation of the device parametric performance.
AVAILABLE OPTIONS TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M2ACD TLC25M2BCD PLASTIC DIP (P) TLC25M2ACP TLC25M2BCP TSSOP (PW) TLC25L2ACPW TLC25L2BCPW CHIP FORM (Y) TLC25L2Y TLC25M2Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the / 25_2 series devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. The / 25_2 series is well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 8-pin plastic dip and the small-outline package. The device is also available in chip form. The / 25_2 series is characterized for operation from to 70°C.
These chips, properly assembled, display characteristics similar to the / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJMAX = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M2CPSR ti TLC25M2, Dual Low-power Low-voltage Operational Amplifier|
|TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
|TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
8404801DA : ti SN54HC11, Triple 3-Input Positive-and Gates
OPA356AID : ti OPA356, 2.5V, 200MHz Gbw, CMOS Single op Amp
SN74HCT240NSR : Inverting Buffers and Drivers ti SN74HCT240, Octal Buffers And Line Drivers With 3-State Outputs
CD74HCT4052M96G4 : High-speed CMOS Logic 4-bit Binary Ripple Counter
TLC7705QPWG4 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tube 1; IC 4.55V SUPPLY MONITOR 8-TSSOP Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High/Active Low ; Package / Case: 8-TSSOP (0.173", 4.40mm Width) ; Packaging: Tube ; Number of Voltages Monitored: 1 ; Reset Timeout: 1.1 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 4.55V ; Operating Temperature:
TS3A27518EIPWRQ1 : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC MUX/DEMUX 1X2 24TSSOP Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
74ALVCH16270DLG4 : 1-bit TO 2-bit Address Driver WITH 3-state Outputs
COP688CS-XXX/V : MICROCONTROLLER Specifications: Life Cycle Stage: ACTIVE
TPS22924C : Ultra Small, Low-Input Voltage, Ultra-Low rON Load Switch The TPS22924C is a small, ultra-low rON load switch with controlled turn on. The devices contain N-channel MOSFETs that can operate over an input voltage range of 0.75 V to 3.6 V. An integrated charge pump biases the NMOS switch to achieve a minimum switch ON resistance. The switch is controlled by
LM46002PWPEVM : Power Management IC Development Tools Evaluation Module Texas Instruments LM4600x SIMPLE SWITCHER® Regulators are an easy to use synchronous step-down DC-DC converter capable of driving up to 2A of load current from an input voltage range of 3.5V to 60V. The LM4600x provides exceptional efficiency, output accuracy and drop-out voltage in a very small
TM4C123GH6PMT7 : ARM Microcontrollers - MCU Tiva C Series Microcontroller Texas Instruments Tiva C Series Microcontrollers are the first ARM Cortex-M4 MCUs to be implemented on TI's proprietary 65-nm process technology. Tiva C Series devices increase connectivity integration without sacrificing price, performance, or power consumption. Every TI Tiva C Series MCU integr