Details, datasheet, quote on part number: TLC25M4
PartTLC25M4
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyTLC25M4 Quad Low-Power Low-Voltage Operational Amplifier
DescriptionQuad Low-Power Low-Voltage Operational Amplifier 14-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSCompliant
SampleNo
DatasheetDownload TLC25M4 datasheet
Cross ref.Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA
Quote
Find where to buy
 
Specifications 
Vos (Offset Voltage @ 25C)(Max)(mV)10
Offset Drift(Typ)(uV/C)1.7
Operating Temperature Range(C)0 to 70
Vn at 1kHz(Typ)(nV/rtHz)32
Output Current(Typ)(mA)1
CMRR(Min)(dB)65
Iq per channel(Typ)(mA)0.105
RatingCatalog
Rail-to-RailIn to V-
Total Supply Voltage(Max)(+5V=5, +/-5V=10)16
Approx. Price (US$)2.41 | 1ku
Number of Channels(#)4
Iq per channel(Max)(mA)0.28
Input Bias Current(Max)(pA)60
ArchitectureCMOS
Total Supply Voltage(Min)(+5V=5, +/-5V=10)1.4
CMRR(Typ)(dB)91
Package GroupPDIP,SOIC
Additional FeaturesN/A
GBW(Typ)(MHz)0.525
Slew Rate(Typ)(V/us)0.4
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G50TUBETLC25M4C 3.918.651.581.27
Spice Model
TLC25M4, TLC25M4A, TLC25M4B PSpice Model - ZIP (01/10/2002)

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25M4C
TLC25M4Y
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25M4A
TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier
TLC25M4C
TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier
TLC25M4Y
TLC25MX
TLC25MXA
TLC25MXB
TLC25X
TLC25XA
TLC25XB
TLC2652
TLC2652A
TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652AC
TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier
TLC2652AC14D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652ACN ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier
TLC2652AI Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
Same catergory

2SC4682 : NPN Epitaxial Type ( Strobe Flash, Medium Power Amplifier Applications ).

5962-87710022A : ti LM158A, Dual General Purpose Bipolar Operational Amplifier. - Single Supply. V (LM2904 and or - Dual Supplies Low Supply-Current Drain Independent of Supply Voltage. 0.7 mA Typ Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground Low Input Bias and Offset Parameters: - Input Offset Voltage. 3 mV Typ A Versions. 2 mV Typ - Input Offset Current. 2 nA Typ - Input Bias Current. 20 nA Typ A Versions.

858Series : 0.1 HZ to 102.4 KHZ 8-bit Programmable. The 858 Series are digitally programmable low pass and high-pass active filters that are tunable over a 256:1 frequency range. 858 filters are available with any one of six standard factory-set tuning ranges to 102.4 kHz. These units contain 8 CMOS logic inputs that can be operated in a transparent or latching mode. All 858 Series models are convenient,.

HS-22620RH : Radiation Hardened, Very Wideband, High Input Impedance Uncompensated Operational Amplifiers.

LB1710 : Low-active, 7-unit, Darlington Transistor Array. Applications Relay drivers, printer drivers, lamp drivers. Input : Low-active type, Output : Sink type High breakdown voltage VCEO=50V. High-current drive IC max=400mA. On-chip input diodes. s Parameter Maximum supply voltage Collector-to-emitter voltage Collector current Input voltage Allowable power dissipation Operating temperature Storage temperature.

LH0063 : Fast And Ultra Fast Buffer (discontinued). The LH0033 and LH0063 are high speed FET input voltage follower buffers designed to provide high current drive at frequencies from DC to over 100 MHz The LH0033 will provide 10 mA into 1 kX loads 100 mA peak) at slew rates 1500V ms The LH0063 will provide 250 mA into 50X loads 500 mA peak) at slew rates ms In addition both exhibit excellent phase linearity.

MAX381 : -. The MAX381/MAX383/MAX385 are precision, low-voltage analog switches. The single-pole single-throw MAX381 and double-pole single-throw MAX385 dual switches are normally open. The single-pole doublethrow MAX383 has two normally open and two normally closed poles. All three parts offer low on-resistance (less than 35 guaranteed to match to within 2 between.

NJG1709KC1-C1 : 1.5/1.9ghz Band Front-end GAAS Mmic. n GENERAL is a front-end GaAs MMIC including a LNA, a local amplifier and a mixer, designed mainly for or 1.9GHz band cellular phone. The ultra small & ultra thin FLP10 package is applied. n lLow Voltage Operation lLow Current Consumption n PACKAGE OUTLINE NJG1709KC1 +2.7V typ. LNA 3.2mA typ. Mixer 5.1mA typ. (with Local Amplifier operation current).

OP-27AJ : Low-noise, Precision Operational Amplifier. Low Noise: 80 nV p-p to 10 Hz), 3 nV/Hz Low Drift: V/ C High Speed: V/ s Slew Rate, 8 MHz Gain Bandwidth Low VOS: 10 V Excellent CMRR: 11 V High Open-Loop Gain: 1.8 Million Fits OP07, 5534A Sockets Available in Die Form GENERAL The OP27 precision operational amplifier combines the low offset and drift of the OP07 with both high speed and low noise.

OP249 : Dual. Dual, Precision JFET High Speed Operational Amplifier. Dual, Precision JFET High-Speed Operational Amplifier OP249 PIN CONNECTIONS 8-Lead Cerdip (Z Suffix), 8-Lead Plastic Mini-DIP (P Suffix) Fast Slew Rate: 22 V/s Typ Settling Time 1.2 s Max Offset Voltage: 300 V Max High Open-Loop Gain: 1000 V/mV Min Low Total Harmonic Distortion: 0.002% Typ Improved Replacement for OP215, TL072, and MC34082 APPLICATIONS.

OPA380AID : ti OPA380, High Speed Precision Transimpedance Amplifier. OVER 1MHz TIA BANDWIDTH DYNAMIC RANGE: 5 Decades EXCELLENT LONG-TERM STABILITY VERY LOW 1/f NOISE BIAS CURRENT: 50pA (max) OFFSET VOLTAGE: 25V (max) DRIFT: 0.1V/C GAIN BANDWIDTH: 85MHz QUIESCENT CURRENT: 6mA SUPPLY RANGE: to 5.5V SINGLE AND DUAL VERSIONS MicroSIZE PACKAGE: MSOP-8 The OPA380 family of transimpedance amplifiers provides high-speed.

OPA4344EA/250 : ti OPA4344, Low Power, Single-Supply, Rail-to-rail Operational Amplifiers MicroAmplifier(TM) Series.

PDSP16116 : 16 X 16 Bit Complex Multiplier. The PDSP16116 contains four 16316 array multipliers, two 32-bit adder/subtractors and all the control logic required to support Block Floating Point Arithmetic as used in FFT applications. The PDSP16116A variant will multiply two complex (16116) bit words every 50ns and can be configured to output the complete complex (32132) bit result within a single.

TEA5591 : AM/FM Radio Receiver Circuit. Product File under Integrated Circuits, IC01 June 1989 The is an integrated radio circuit which is designed for use in portable receivers and clock radios. The IC is also applicable to mains-fed AM an AM/FM receivers and car radio-receivers. The main advantage of this IC is its ability to operate over a wide range of supply voltages without loss of performance.

THS4130 : Single. High Speed Differential-input/differential-output Amplifiers. High Performance D Single-Ended To Differential Conversion 150 MHz 3 dB Bandwidth (VCC V) D Differential ADC Driver 51 V/s Slew Rate D Differential Antialiasing 100 dB Third Harmonic Distortion at D Differential Transmitter And Receiver 250 kHz D Output Level Shifter Low Noise 1.3 nV/Hz Input-Referred Noise Differential-Input/Differential-Output.

TK15421 : 75 Ohm Video Line Driver. Fixed Gain (6 dB) Internal 75 Drivers Very Small Output Capacitor at SAG Function Pin Active High ON/OFF Control Very Low Standby Current (typ. ICCS 25 A) Internal Summing Circuit of Y/C Signal. APPLICATIONS Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape Recorders LCD Televisions The a 75 video line driver IC which contains 2 channeld.

TLE2037ACD : ti TLE2037A, Excalibur Low-noise High-speed Precision Decompensated Operational-amplifier.

TS3USB221A : ESD Protected,High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch The TS3USB221A is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900.

ISL28133 : Single, Dual, And Quad Micropower, Zero-Drift, RRIO Operational Amplifiers The ISL28133, ISL28233 are single and dual micropower, zero-drift operational amplifiers that are optimized for single supply operation from 1.65V to 5.5V. Their low supply current of 18?A and wide input range enable the ISL28133 to be an excellent general purpose op amp for a range.

TPS22932B : Low-Input Voltage, Ultra Low On Resistance Load Switch With Configurable Enable Logic And Controlled TPS22932B is a low rON load switch with controlled turn on. It contains an ultra-low rON P-channel MOSFET that can operate over an input voltage range of 1.1 V to 3.6 V. The switch is controlled by eight patterns of 3-bit input. The user can choose the logic.

 
0-C     D-L     M-R     S-Z