|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M4A LinCMOS(TM) Quad Operational Amplifier|
|Description||LinCMOS(TM) Quad Operational Amplifier 14-SOIC 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M4A datasheet
|Cross ref.||Similar parts: CA3100E, CA3100T, JM38510/10101BPX, JM38510/10104BGA, JM38510/10104BGC, JM38510/10104SGA, JM38510/11401BGA, JM38510/11401BGC, JM38510/11401SGA, JM38510/11403BGA|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Number of Channels(#)||4|
|Iq per channel(Max)(mA)||0.28|
|Vos (Offset Voltage @ 25C)(Max)(mV)||5|
|Input Bias Current(Max)(pA)||60|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M4, TLC25M4A, TLC25M4B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)
description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.
These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.
Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70°C.
DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) µA 0.04 V/µA mV 0.1 µV/month 0.7 µV/°C pA TLC25M4_C (MEDIUM BIAS) µA 0.6 V/µA mV 0.1 µV/month 2 µV/°C pA TLC254_C (HIGH BIAS) µA 4.5 V/µA mV 0.1 µV/month 5 µV/°C 1 pAInput offset current (Typ) 1 pA The long-term drift value applies after the first month.
These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M4ACD ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier|
|TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
|TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
|TLC2652AC14D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652ACN ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
|TLC2652AI Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
2SC4944 : NPN Epitaxial Type ( Audio Frequency General Purpose Amplifier Applications ).
AD606-EB : 50 Mhz, 80 DB Demodulating Logarithmic Amplifier With Limiter Output. 50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output AD606 a loadable output voltage +4 V dc. The logarithmic scaling is such that the output +0.5 V for a sinusoidal input of 75 dBm and at an input of +5 dBm; over this range the logarithmic linearity is typically within ± 0.4 dB. All scaling parameters are proportional to the supply.
BU2050F : . The is a driver IC that is comprised an 8-bit shift register and a latch (serial in / parallel out). The data read into the shift register can be asynchronously latched. The CMOS outputs can provide 25mA (Max.) of current per output, making this IC ideal for a wide range of applications including driving LEDS. Applications Printers, mini-component stereo.
CHA5290 : 17.7-24ghz Medium Power Amplifier. The is a high gain four-stage monolithic medium power amplifier. It is designed for a wide range of applications, from military to commercial communication systems. The backside of the chip is both RF and DC grounds. This helps simplify the assembly process. The circuit is manufactured with a PM-HEMT process, 0.25µm gate length, via holes through the substrate,.
HA1-2542-5 : . DUCT E PRO PRODUCT OBS ITUTE 1 SUBST A-2 Data 54 Sheet 42, H POSS HA-28 70MHz, High Slew Rate, High Output Current Operational Amplifier The is a wideband, high slew rate, monolithic operational amplifier featuring an outstanding combination of speed, bandwidth, and output drive capability. Utilizing the advantages of the Intersil D.I. technology this.
INA139NA/250 : Difference Amplifiers. ti INA139, High-side Measurement Current Shunt Monitor.
LA75675M-S : . VIF/SIF IF Signal-Processing Circuit that Supports NTSC Intercarrier for TV and VCR Products The is an NTSC intercarrier VIF/SIF IC that adopts a semi-adjustment-free structure. In particular, it uses VCO adjustment to make AFT adjustment unnecessary and thus simplifies the overall adjustment process. A PLL-based technique is adopted for FM detection.
LC75342 : . The LC75342 and LC75342M are electronic volume and tone control systems that provide volume, balance, a 2band equalizer, and input switching functions that can be controlled from serially transferred data. Volume: 79 dB (in 1-dB steps) and for a total of 81 settings. The volume can be controlled independently in the left and right channels to implement.
MAX455C/D : CMOS Video Multiplexer/amplifier.
MPY534 : Precision Analog Multiplier. q ±0.25% max 4-QUADRANT ACCURACY q WIDE BANDWIDTH: 1MHz min, 3MHz typ q ADJUSTABLE SCALE FACTOR q STABLE AND RELIABLE MONOLITHIC CONSTRUCTION q LOW COST The is a high accuracy, general purpose four-quadrant analog multiplier. Its accurately laser trimmed transfer characteristics make it easy to use in a wide variety of applications with a minimum of external.
OPA501 : . High Current, High Power OPERATIONAL AMPLIFIER q HIGH OUTPUT CURRENT: ±10A Peak q WIDE POWER SUPPLY RANGE: ±40V q LOW QUIESCENT CURRENT: 2.6mA q ISOLATED CASE TO-3 PACKAGE APPLICATIONS q MOTOR DRIVER SERVO AMPLIFIER VALVE ACTUATOR SYNCRO DRIVER PROGRAMMABLE POWER SUPPLY The is a high output current operational amplifier. It can be used in virtually.
TDA2582 : Control Circuit For Power Supplies.
TEB1033 : Dual Bipolar Op-amps. 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE RANGE HIGH OUTPUT CURRENT GAIN-BANDWIDTH PRODUCT : 2MHz TEMPERATURE DRIFT : 2µV/°C LONG TERM STABILITY : 8µV/YEAR (for Tamb 50°C) SHORT CIRCUIT PROTECTION The TEB1033, TEF1033 and TEC1033 are high performance dual operational amplifiers intended.
TLV2774 : . TLV277x, TLV277xA FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN High Slew Rate. 10.5 V/µs Typ High-Gain Bandwidth. 5.1 MHz Typ Supply Voltage Range 5.5 V Rail-to-Rail Output 360 µV Input Offset Voltage Low Distortion Driving 600- 0.005% THD+N 1 mA Supply Current (Per Channel) 17 nV/Hz Input Noise Voltage 2 pA Input.
X9221 : Dual 64 Tap XDCP Two-wire Interface Single Supply. Two XDCPs in one package 2-wire serial interface Register oriented format --Directly write wiper position --Read wiper position --Store as many as four positions per pot Instruction format --Quick transfer of register contents to resistor array Low power CMOS Direct write cell --Endurance100,000 writes per bit per register --Register data retention100.
STPAC01F2 : RF detector for power amplifier control The STPAC01F2 is an integrated RF detector for the power control stage. It converts RF signal coming from the coupler into a DC signal usable by the digital stage. It is based on the use of two similar diodes, one providing the signal detection while the second one is used to provide a temperature information.
AD9230 : 12-Bit, 170/210/250 MSPS 1.8 V A/D Converter The AD9230 is a 12-bit monolithic sampling analog-to-digital converter optimized for high performance, low power, and ease of use. The product operates up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions,.
ISL23511 : Low Noise, Low Power, 32 Taps, Push Button Controlled Potentiometer The Intersil ISL23511 is a three-terminal digitally-controlled potentiometer (XDCP) implemented by a resistor array composed of 31 resistive elements and a wiper switching network. The ISL23511 a push button control, a shutdown mode, as well as an industry-leading ?TQFN package. The push.
DG408 : Improved, 8-Channel/Dual 4-Channel, CMOS Analog Multiplexers Maxim\'s redesigned DG408 and DG409 CMOS analog multiplexers now feature guaranteed matching between channels (8? max) and flatness over the specified signal range (9? max). These low on-resistance muxes (100? max) conduct equally well in either direction and feature guaranteed low charge.
BUF16821 : Progammable Gamma-Voltage Generator And Vcom Calibrator With Integrated Two-Bank Memory The BUF16821 offers 16 programmable gamma channels and two programmable VCOM channels. The final gamma and VCOM values can be stored in the on-chip, nonvolatile memory. To allow for programming errors or liquid crystal display (LCD) panel rework, the BUF16821 supports.