Details, datasheet, quote on part number: TLC25M4ACD
PartTLC25M4ACD
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers
Descriptionti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
CompanyTexas Instruments, Inc.
DatasheetDownload TLC25M4ACD datasheet
Quote
Find where to buy
 
  

 

Features, Applications

A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)

description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.

Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70C.

DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) A 0.04 V/A mV 0.1 V/month 0.7 V/C pA TLC25M4_C (MEDIUM BIAS) A 0.6 V/A mV 0.1 V/month 2 V/C pA TLC254_C (HIGH BIAS) A 4.5 V/A mV 0.1 V/month 5 V/C 1 pA

Input offset current (Typ) 1 pA The long-term drift value applies after the first month.

These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.


 

Related products with the same datasheet
TLC25M4ACDR
TLC25M4ACN
Some Part number from the same manufacture Texas Instruments, Inc.
TLC25M4ACDR ti TLC25M4A, LinCMOS(TM) Quad Operational Amplifier
TLC25M4B
TLC25M4BCD ti TLC25M4B, LinCMOS(TM) Quad Operational Amplifier
TLC25M4C
TLC25M4CD ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier
TLC25M4Y
TLC25MX
TLC25MXA
TLC25MXB
TLC25X
TLC25XA
TLC25XB
TLC2652
TLC2652A
TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652AC
TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier
TLC2652AC14D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652ACN ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier
TLC2652AI Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers
TLC2652AI
Same catergory

2SA1987 : Transistor ( Power Amplifier Applications ).

AD8036 : Unity Gain Stable - Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps.

EL2171C : 150 MHZ Current Feedback Amplifier. 150 MHz 3 dB bandwidth 10 ns settling 5 ns rise fall times (2V step) Overload short-circuit protected g 50 closed-loop gain range Low cost EL2171 is direct replacement for CLC401 Disable capability on EL2071 The EL2071 and EL2171 are wide bandwidth fast settling monolithic amplifiers built using an advanced complementary bipolar process The EL2071 has a disable.

EL5134 : Single, 630MHz Low Noise Amplifier With Enable The EL5134, EL5135, EL5234, And EL5235 Are Ultra-low Voltage Noise, High Speed Voltage Feedback Amplifiers That Are Ideal For Applications Requiring Low Voltage Noise, Including Communications And Imaging. These Devices Offer Extremely Low Power Consumption For Exceptional Noise Performance. Stable at Gains.

HER1601CS : High Efficiency Rectifier ( Voltage Range 50 to 400 Volts Current 16.0 Amperes ).

HT9580 : Character Pager Controller. Operating voltage: 2.4V~3.5V Temperature range: to +85C low power, high performance M6502 core low power crystal oscillator control - 512/1200/2400 bps data rate operation CCIR Radio Paging Code No.1 (POCSAG) compatible 76.8kHz crystal for all available data rates High/low system clock switching capability 44 Kbytes program ROM 848 bytes global data.

LT1782 : LT1782, Micropower, Over-the-top SOT-23, Rail-to-rail Input And Output op Amp.

MPC506 : . q ANALOG OVERVOLTAGE PROTECTION: q NO CHANNEL INTERACTION DURING OVERVOLTAGE q BREAK-BEFORE-MAKE SWITCHING q ANALOG SIGNAL RANGE: 15V q STANDBY POWER: 7.5mW typ q TRUE SECOND SOURCE The MPC506A and MPC507A are fabricated with Burr-Brown's dielectrically isolated CMOS technology. The multiplexers are available in plastic DIP and plastic SOIC packages.

NCS2002SN1T1 : Rail-to-Rail, 0.9-7V Single CMOS Operational Amplifier With Enable, Package: Tsop, Pins=6.

PAC500QT : P/active Emi/rfi T Filter.

SAA7360 : Bitstream Conversion ADC For Digital Audio Systems. Product Supersedes data of July 1993 File under Integrated Circuits, IC01 1995 Apr 24 Stereo input Single-ended input Uncommitted input buffer for filtering and pre-scaling Fully differential analog-to-digital converter (ADC) using 3rd order Sigma-Delta modulation 128 times oversampling Four stage digital decimation filter Switchable high-pass filter.

TDA1581T : TDA1581T; Decoder For Traffic Warning (VWF) Radio Transmissions. TDA1581T Decoder for traffic warning (VWF) radio transmissions Preliminary File under Integrated Circuits, IC01 March 1992 Decoder for traffic warning (VWF) radio transmissions Selective subcarrier amplifier (57 kHz) with gain control Transmitter identification signal (SK) decoder Area identification signal (BK) and announcement identification signal.

TLV3494AID : ti TLV3494, Quad Nanopower Push-pull Output Comparator. q VERY LOW SUPPLY CURRENT: 0.8A (typ) q INPUT COMMON-MODE RANGE 200mV BEYOND SUPPLY RAILS q SUPPLY VOLTAGE: +5.5V q HIGH SPEED: 6s q PUSH-PULL CMOS OUTPUT STAGE q SMALL PACKAGES: SOT23-5 (Single) SOT23-8 (Dual) The TLV349x family of push-pull output comparators a fast 6s response time, and < 1.2A (max) nanopower capability, allowing operation.

MSK 0004 : The MSK 0004 is a high voltage operational amplifier for use in high performance signal conditioning applications, as well as resolver excitation designs. These devices offer maximum reliability by providing internal output overload protection and thermal overload protection. Monolithic design and internal compensation make the MSK 0004 an excellent.

HMC676LP3E : Latched Comparator With RSCML Output Stage SMT, 10 GHz The HMC676LP3E is a SiGe monolithic, ultra fast comparator which reduced swing ECL output drivers and latch inputs. The comparator supports 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew rate dispersion.

 
0-C     D-L     M-R     S-Z