|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps|
|Part family||TLC25M4 Quad Low-Power Low-Voltage Operational Amplifier|
|Description||Quad Low-Power Low-Voltage Operational Amplifier 14-SOIC 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLC25M4CD datasheet
|Vos (Offset Voltage @ 25C)(Max)(mV)||10|
|Operating Temperature Range(C)||0 to 70|
|Vn at 1kHz(Typ)(nV/rtHz)||32|
|Iq per channel(Typ)(mA)||0.105|
|Rail-to-Rail||In to V-|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||16|
|Approx. Price (US$)||2.41 | 1ku|
|Number of Channels(#)||4|
|Iq per channel(Max)(mA)||0.28|
|Input Bias Current(Max)(pA)||60|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||1.4|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|TLC25M4, TLC25M4A, TLC25M4B PSpice Model - ZIP (01/10/2002)|
A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version)
description symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate with IN single or dual supplies. These devices utilize the Texas Instruments silicon gate LinCMOS process, giving them stable input-offset voltages that are available in selected grades 10 mV maximum, very high input impedances, and extremely low input offset and bias currents. Because the input common-mode range extends to the negative rail and the power consumption is extremely low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers operation down a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.
These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance. Because of the extremely high input impedance and low input bias and offset currents, applications for these devices include many areas that have previously been limited to BIFET and NFET product types. Any circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective use of these devices. Many features associated with bipolar technology are available with LinCMOS operational amplifiers without the power penalties of traditional bipolar devices.
Available options TA VIOmax 2 mV PACKAGED DEVICES SMALL OUTLINE (D) TLC25M4ACD TLC25M4BCD PLASTIC DIP (N) TLC25M4ACN TLC25M4BCN TSSOP (PW) TLC25L4CPW TLC25M4CPW CHIP FORM (Y) TLC25L4Y TLC25M4Y
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC254CDR). Chips are tested at 25°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with these devices. Remote and inaccessible equipment applications are possible using their low-voltage and low-power capabilities. These devices are well suited to solve the difficult problems associated with single-battery and solar-cell-powered applications. This series includes devices that are characterized for the commercial temperature range and are available in 14-pin plastic dip and the small-outline packages. The device is also available in chip form. These devices are characterized for operation from to 70°C.
DEVICE FEATURES PARAMETER Supply current (Typ) Slew rate (Typ) Input offset voltage (Max) TLC25L4BC, TLC25M4BC Offset voltage drift (Typ) Offset voltage temperature coefficient (Typ) Input bias current (Typ) TLC25L4_C (LOW BIAS) µA 0.04 V/µA mV 0.1 µV/month 0.7 µV/°C pA TLC25M4_C (MEDIUM BIAS) µA 0.6 V/µA mV 0.1 µV/month 2 µV/°C pA TLC254_C (HIGH BIAS) µA 4.5 V/µA mV 0.1 µV/month 5 µV/°C 1 pAInput offset current (Typ) 1 pA The long-term drift value applies after the first month.
These chips, when properly assembled, display characteristics similar to the TLC25_4C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
CHIP THICKNESS: 15 TYPICAL BONDING PADS: × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLC25M4CDR ti TLC25M4, Quad Low-power Low-voltage Operational Amplifier|
|TLC2652A-8D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AC-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
|TLC2652AC14D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652ACN ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
|TLC2652AI Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AI-14D ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
|TLC2652AI14D Advanced Lincmose Precision Chopper-stabilized Operational Amplifiers|
|TLC2652AIN ti TLC2652A, Advanced LinCMOS(TM) Precision Chopper-stabilized Operational Amplifier|
AD8042 : 150 MHZ Rail-to-rail Amplifier. Single AD8041 and Quad AD8044 also Available Fully Specified +5 V, and 5 V Supplies Output Swings to Within mV of Either Rail Input Voltage Range Extends 200 mV Below Ground No Phase Reversal with Inputs 0.5 V Beyond Supplies Low Power 5.2 mA per Amplifier High Speed and Fast Settling V: 160 MHz 3 dB Bandwidth V/ s Slew Rate 39 ns Settling Time to 0.1%.
LA7567NM : TV And VCR Vif/sif if Signal-processing Circuit With Pal/ntsc Multi-format Audio Support.
LB1274 : 6-unit, Darlington Transistor Array. Circuit structure of this a 6-unit Darlington transistor array with NPN transistors. The IC is ideal for driving printers, relays, and lamps. Protective diodes guard against negative inputs. Thus it has advantages when designing circuits to drive printer-calculators that use display tubes, cash registers, and the like. Ideal for 18-digit printers (because.
LC72720 : Single-chip RDS Signal-processing System Lsi. The LC72720 and LC72720M are single-chip system LSIs that implement the signal processing required by the European Broadcasting Union RDS (Radio Data System) standard and by the US NRSC (National Radio System Committee) RDBS (Radio Broadcast Data System) standard. These LSIs include band-pass filter, demodulator, synchronization, and error correction.
LF353 : Dual Operational Amplifier (JFET). Internally trimmed offset voltage: 10mV Low input bias current: 50pA Wide gain bandwidth: 4MHz High slew rate: 13V/µs High Input impedance: 1012 The is a JFET input operational amplifier with an internally compensated input offset voltage. The JFET input device provides wide bandwidth, low input bias currents and offset currents. Parameter Power Supply.
LMC7101 : LMC7101 Low-power Operational Amplifier. The is a high-performance, low-power, operational amplifier which is pin-for-pin compatible with the National Semiconductor LMC7101. It rail-to-rail input and output performance in Micrel's IttyBittyTM SOT-23-5 package. The a 500kHz gain bandwidth amplifier designed to operate from to 12V single-ended power supplies with guaranteed performance at supply.
LX7001 : Power. Transient Immune Undervoltage Sensing Circuit.
M5M44405CJ : Edo ( Hyper Page Mode ) 4194304-bit ( 1048576-word BY 4-bit ) Dynamic RAM.
MAX5417 : 256-Tap, Nonvolatile, I2C-Interface, Digital Potentiometers nonvolatile, Lineartaper, Digital Potentiometers Perform The Function of a Mechanical Potentiometer, But Replace The Mechanics With a Simple 2-wire Digital Interface, Allowing Communication With Multiple Devices. Each Device Performs The Same Function as a Discrete Potentiometer or Variable.
NE/SE521 : High-speed Dual-differential Comparator/sense Amp. The is a fast slewing high performance operational amplifier which retains DC performance equal to the best general purpose types while providing far superior large-signal AC performance. A unique input stage design allows the amplifier to have a large-signal response nearly identical to its small-signal response. The amplifier is compensated for truly.
PGA204 : . q DIGITALLY PROGRAMMABLE GAIN: 8V/V q LOW OFFSET VOLTAGE: 50µV max q LOW OFFSET VOLTAGE DRIFT: 0.25µV/°C q LOW INPUT BIAS CURRENT: 2nA max q LOW QUIESCENT CURRENT: 5.2mA typ q NO LOGIC SUPPLY REQUIRED q 16-PIN PLASTIC DIP, SOL-16 PACKAGES The PGA204 and PGA205 are low cost, general purpose programmable-gain instrumentation amplifiers offering excellent.
STK4040X : af Power (70W) Amplifier.
TC1028 : The TC1028 is a Mixed-function Device Combining Two Comparators And a Voltage Reference in a Single 8-pin Package.
TLV2475A : . TLV2475, TLV247xA FAMILY 600-µA/Ch 2.8-MHz RAIL-TO-RAIL INPUT/OUTPUT HIGH-DRIVE OPERATIONAL AMPLIFIERS WITH SHUTDOWN CMOS Rail-To-Rail Input/Output Input Bias Current. 2.5 pA Low Supply Current. 600 µA/Channel Ultra-Low Power Shutdown Mode IDD(SHDN). 350 nA/ch 3 V IDD(SHDN). 1000 nA/ch 5 V Gain-Bandwidth Product. 2.8 MHz High Output Drive Capability.
UAA3201T : UAA3201T; UHF/VHF Remote Control Receiver. Product Supersedes data of 1995 May 18 File under Integrated Circuits, IC18 2000 Apr 18 Oscillator with external Surface Acoustic Wave Resonator (SAWR) Wide frequency range from to 450 MHz High sensitivity Low power consumption Automotive temperature range Superheterodyne architecture Applicable to fulfil FTZ TR 2100 (Germany) High integration level,.
AD8253 : 10 MHz, 20 V/μs, G = 1, 10, 100, 1000 iCMOS Programmable Gain Instrumentation Amplifier The AD8253 is an instrumentation amplifier with digitally 1 AD624 AD8556 programmable gains that has G¦¸ input impedance, low output 1 AD8557 noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital.
OPA2695 : Ultra-Wideband, Current-Feedback Operational Amplifier With Disable The OPA2695 is a dual, very high bandwidth, current-feedback op amp that combines exceptional 2900V/??s slew rate and low input voltage noise to deliver a precision, low-cost, high dynamic range intermediate frequency (IF) amplifier. The device has been optimized for high gain operation,.
ADA4895-2 : 1 NV/?Hz, Low Power,G?10 Stable Rail-to-Rail Output Amplifier The ADA4895-2 is a gain?10 stable, low noise, rail-to- rail output, high speed voltage feedback amplifier that has quiescent current of 3 mA. With the 1/f noise of 2.4 nV/?Hz at 10 Hz and a spurious-free dynamic range of ?63 dBc at 2 MHz, the ADA4895-2 is an ideal solution in a variety of applications,.