Details, datasheet, quote on part number: TLC27
PartTLC27
Category
DescriptionLincmos Precision Quad Operational Amplifiers
CompanyTexas Instruments, Inc.
DatasheetDownload TLC27 datasheet
Cross ref.Similar parts: AD822
Quote
Find where to buy
 
  

 

Features, Applications

description

The TLC274 and TLC279 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices.

30 290 Units Tested From 2 Wafer Lots VDD 25C N Package

These devices use Texas Instruments silicongate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes. The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for BiFET and NFET products. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC274 (10 mV) to the highprecision TLC279 (900 V). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Trimmed Offset Voltage: 900 V Max at 25C, VDD 5 V Input Offset Voltage Drift. Typically 0.1 V/Month, Including the First 30 Days Wide Range of Supply Voltages Over Specified Temperature Range: 16 V Single-Supply Operation Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix and I-Suffix Versions) Low Noise. Typically 25 nV/Hz = 1 kHz Output Voltage Range Includes Negative Rail High Input Impedance. 1012 Typ ESD-Protection Circuitry Small-Outline Package Option Also Available in Tape and Reel Designed-In Latch-Up Immunity

In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC274 and TLC279. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail. A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications. The device inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up. The TLC274 and TLC279 incorporate internal ESD-protection circuits that prevent functional failures at voltages V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance. The C-suffix devices are characterized for operation from to 70C. The I-suffix devices are characterized for operation from to 85C. The M-suffix devices are characterized for operation over the full military temperature range to 125C.

AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax 10 mV SMALL OUTLINE (D) TLC279MD TLC274MD CHIP CARRIER (FK) TLC279MFK TLC274MFK CERAMIC DIP (J) TLC279MJ TLC274MJ PLASTIC DIP (N) TLC279MN TLC274MN TSSOP (PW) TLC274CPW CHIP FORM (Y) TLC274Y

The D package is available taped and reeled. Add R suffix to the device type (e.g., TLC279CDR).

 

Related products with the same datasheet
TLC274MFK
TLC274MN
TLC279MD
TLC279MFK
TLC279MJ
TLC279MN
TLC27LI
TLC27LX
TLC27LXA
TLC27LXB
TLC27MX
TLC27MXA
Some Part number from the same manufacture Texas Instruments, Inc.
TLC271 Programmable Low-power Linear CMOS op Amp: Single
TLC271A -
TLC271ACD ti TLC271A, Programmable Low-power Operational Amplifier
TLC271AI -
TLC271AID ti TLC271A, Programmable Low-power Operational Amplifier
TLC271AM -
TLC271BCD ti TLC271B, Programmable Low-power Operational Amplifier
TLC271BI -
TLC271BID ti TLC271B, Programmable Low-power Operational Amplifier
TLC271C Programmable Low-power Linear CMOS op Amp: Single
TLC271CD ti TLC271, LinCMOS(TM) Programmable Low-power Operational Amplifier
TLC271I Programmable Low-power Linear CMOS op Amp: Single
TLC271ID ti TLC271, LinCMOS(TM) Programmable Low-power Operational Amplifier
TLC271M Programmable Low-power Linear CMOS op Amp: Single
TLC271MD Lincmose Programmable Low-power Operational Amplifiers
TLC271MDR ti TLC271, LinCMOS(TM) Programmable Low-power Operational Amplifier
TLC271MFK Lincmose Programmable Low-power Operational Amplifiers
TLC271MJG ti TLC271, LinCMOS(TM) Programmable Low-power Operational Amplifier
TLC271MP Lincmose Programmable Low-power Operational Amplifiers
TLC271PS-M ti TLC271, LinCMOS(TM) Programmable Low-power Operational Amplifier
TLC272 Lincmos(tm) Precision Dual op Amp: Quad
Same catergory

74F379A : Registered drivers. 74F379A; Quad Register;; Package: SOT109 (SO16), SOT38-4 (DIP16).

AAM29LV020BB-120EC : 2 Megabit ( 256 K X 8-bit ) CMOS 3.0 Volt-only, Uniform Sector 32-pin Flash Memory.

M68732SL : RF Power Module For 330-360MHz, 7W FM Portable Radio. PIN: 1 Pin : RF INPUT 2 VGG : GATE BIAS SUPPLY 3 VDD : DRAIN BIAS SUPPLY : RF OUTPUT 5 GND: FIN ABSOLUTE MAXIMUM RATINGS (Tc=25C unless otherwise noted) Symbol VDD VGG Pin PO TC (OP) Tstg Parameter Supply voltage Gate bias voltage Input power Output power Operation case temperature Storage temperature Conditions f=330-380MHz, ZG=ZL=50 Ratings to +110.

7363SYGD/S530-E2 : 4.7mm Round Type LED Lamps. Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly Stackable and easy to assembly Stackable vertically and easy to assembly Versatile mounting on P.C board or panel Stackable horizontally and easy to assembly Pb free The product itself will remain within RoHS.

VJ0402X102JFAAC : Surface Mount Multilayer Ceramic Chip Capacitors for TCC Critical Applications.

C-143-1250-FDFB-SLC2 : 155 Mbps CWDM Laser Single Mode Transceiver. 155 Mbps CWDM Laser Single Mode Transceiver Duplex SC Single Mode Transceiver Industry Standard 1x9 Footprint Long reach SONET OC-3 SDH STM-1 Compliant Single +3.3V/+5V Power Supply LVPECL/PECL Differential Inputs and Outputs Wave Solderable and Aqueous Washable Class 1 Laser Int. Safety Standard IEC 825 Compliant Uncooled laser diode with MQW sturcture.

405C33SM : Surface Mount Quartz Crystal. Standard 5.0x3.2mm Surface Mount Footprint Stable Frequency Over Temperature and Drive Level Frequency Range 50 MHz Frequency Tolerance, 30 ppm Standard (10 ppm and 20 ppm available) Frequency Stability, 50 ppm Standard (10,20,30 and 40 ppm available) Operating Temperature to +85C Tape & Reel Packaging, EIA-481-2 Compliant RoHS/Green Compliant.

HC13397 : Breake Away Header .025(0.64mm) Square Posts.

CSNE151-005 : CURRENT TRANSDUCER, CLOSED LOOP, 25A. s: Current Measuring Range AC: -36A to 36A ; Current Measuring Range DC: -36A to 36A ; Operating Pressure Range: - ; Operating Frequency Range: - ; Supply Voltage Range DC: 14.25V to 15.75V ; Sensor Output: Closed Loop ; Accuracy %: 0.5% ; Response Time: 1s.

SCRH103R-150 : Fixed Inductors, Coils, Choke 15H 2.22A 0.413" L x 0.406" W x 0.122" H (10.50mm x 10.30mm x 3.10mm) -; INDUCTOR SMD 15UH 2.22A 100KHZ. s: Inductance: 15H ; Tolerance: 30% ; Package / Case: 0.413" L x 0.406" W x 0.122" H (10.50mm x 10.30mm x 3.10mm) ; Packaging: Tape & Reel (TR) ; Type: - ; Current: 2.22A ; Mounting Type: Surface Mount ; Q @ Freq:.

MS3102E24-22PW : Aluminum, Olive Drab Cadmium Plated Panel Mount, Flange Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 4 POS BOX MNT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 24-22 ; Mounting Type: Panel Mount, Flange ; Fastening Type: Threaded ; : - ; Packaging: Bulk ; Number of Positions: 4 ; Termination: Solder Cup ; Shell.

ERJ-6ENF10R2V : 10.2 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 10.2 OHM 1/8W 1% 0805 SMD. s: Resistance (Ohms): 10.2 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

L4004L6 : Triac Discrete Semiconductor Product 4A 400V Logic - Sensitive Gate; TRIAC SENS 400V 4A ISO TO-220. s: Triac Type: Logic - Sensitive Gate ; Configuration: Single ; Voltage - Off State: 400V ; Current - On State (It (RMS)) (Max): 4A ; Voltage - Gate Trigger (Vgt) (Max): 1.3V ; Current - Gate Trigger (Igt) (Max): 5mA ; Current - Hold (Ih) (Max): 10mA.

DMA20403 : SMALL SIGNAL TRANSISTOR. s: Package Type: HALOGEN FREE AND ROHS COMPLIANT, MINI6-G4-B, 6 PIN.

TPCL4203 : 2 CHANNEL, N-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; Package Type: THIN, 2-2W1S, CHIPLGA-4 ; Number of units in IC: 2.

68166-001 : 4 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, CRIMP, JACK. s: Applications: Telecom / Data / Network Connectors ; Gender: Female ; Termination Types: Crimp ; Number of Contacts: 4.

H3LIS100DLTR : Accelerometers MEMS motion sensor. STMicroelectronics H3LISx00 3-Axis Digital Accelerometers belong to the "nano" family, with digital I2C/SPI serial interface standard outputs. The H3LISx00DL feature ultra-low-power operational modes that allow advanced power saving and smart sleep-to-wakeup functions. They have a full scale of 100 g and are capable.

 
0-C     D-L     M-R     S-Z