Details, datasheet, quote on part number: TMS28F200AEB
PartTMS28F200AEB
CategoryMemory => Flash
Descriptionti TMS28F200AEB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
CompanyTexas Instruments, Inc.
DatasheetDownload TMS28F200AEB datasheet
  

 

Features, Applications

by 8 bit by 16 bits Array-Blocking Architecture One 16K-Byte Protected Boot Block Two 8K-Byte Parameter Blocks One 96K-Byte Main Block One 128K-Byte Main Block Top or Bottom Boot Locations '28F200Axy Offers a User-Defined 8-Bit (Byte) or 16-Bit (Word) Organization '28F002Axy Offers Only the 8-Bit (Byte) Organization Maximum Access / Minimum Cycle Time Commercial and Extended or 3.3-V VCC V 5-V VCC ns Automotive 5-V VCC or M Depending on VCC/VPP Voltage Configuration) = T for Top or B for Bottom Boot-Block Configuration) 100 000- and 10 000-Program/ Erase-Cycle Versions Three Temperature Ranges Commercial. 70C Extended. 85C Automotive. to 125C Industry Standard Packages Offered 40-pin Thin Small-Outline Package (TSOP) 44-pin Plastic Small-Outline Package (PSOP) 48-pin TSOP Low Power Dissipation ( VCC ) Active Read. mW ( Byte-Read) Active Write. mW ( Byte-Write) Active Read. mW ( Word-Read) Active Write. mW ( Word-Write) Block-Erase. mW Standby. 0.72 mW (CMOS-Input Levels)

PIN NOMENCLATURE A16 A17 BYTE NC RP VCC VPP VSS W DU/WP Address Inputs Address Input (40-Pin Package Only) Byte-Enable Data In / Out Data In / Out (Word-Wide Mode), Low-Order Address (Byte-Wide Mode) Chip-Enable Output-Enable No Internal Connection Reset / Deep Power-Down Power Supply Power Supply for Program / Erase Ground Write-Enable Do Not Use for AMy or AZy/Write-Protect

Fully Automated On-Chip Erase and Word / Byte Program Operations Write-Protection for Boot Block Industry Standard Command-State Machine (CSM) Erase Suspend/Resume Algorithm-Selection Identifier Five Different Combinations of Supply Voltages Offered All Inputs / Outputs TTL-Compatible

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Table of Contents description. 3 read operations. 13 device symbol nomenclature. 5 programming operations. 14 functional block diagram. 6 erase operations. 14 architecture. 6 automatic power-saving mode. 15 block-memory maps. 6 reset / deep power-down mode. 15 boot-block data protection. 7 power supply detection. 15 parameter block. 8 common electrical parameter. 20 main block. 8 absolute maximum ratings. 20 data protection. 8 capacitance. 21 command-state machine (CSM). 8 TMS28F002ASy and TMS28F200ASy. 22 operation. 8 TMS28F002AEy and TMS28F200AEy. 32 command definition. 9 TMS28F002AMy and TMS28F200AMy. 42 status register. 10 TMS28F002AFy and TMS28F200AFy. 50 byte-wide or word-wide mode selection. 11 TMS28F002AZy and TMS28F200AZy. 60 command-state-machine operations. 13 Parameter Measurement Information. 70 clear status register. 13 mechanical data. NO TAG

description

The 072 by-16 bit 097 152-bit), boot-block flash memory that can be electrically block-erased and reprogrammed. The TMS28F200Axy is organized in a blocked architecture consisting of:

One 16K-byte protected boot block Two 8K-byte parameter blocks One 96K-byte main block One 128K-byte main block

The device can be ordered in five different voltage configurations (see Table 1). Operation 128K-word (16-bit) organization is user-definable. The TMS28F002Axy is offered a 256K-byte organization only. The operation for this device is the same as the TMS28F200Axy and is offered in the same voltage configurations. TMS28F002Axy can be substituted for the byte-wide TMS28F200Axy, with the latter being the generic name for this device family. Embedded program and block-erase functions are fully automated by the on-chip write-state machine (WSM), thereby simplifying these operations and relieving the system microcontroller of these secondary tasks. WSM status can be monitored by an on-chip status register to determine the progress of program / erase tasks. The device features user-selectable block-erasure. The configurations are as follow:

The TMS28F002ASy and the TMS28F200ASy configurations have the auto-select feature that allows alternative read and program / erase voltages. Memory reads can be performed using 3.3-V VCC for optimum power consumption at 5-V VCC, for device performance. Erasing or programming the device can be accomplished with 5-V VPP, which eliminates having to use a 12-V source and / or in-system voltage converters. Alternatively, 12-V VPP operation exists for systems that already have a 12-V power supply, which provides faster programming and erasing times. These configurations are offered in two different temperature ranges: to 70C and to 85C. The TMS28F002AEy and the TMS28F200AEy configurations offer the auto-select feature of the TMS28F200ASy with an extended VCC to a low to 3.6-V range (3-V nominal). Memory reads can be performed using a 3-V VCC, allowing for more efficient power consumption than the 'ASy device.


 

Some Part number from the same manufacture Texas Instruments, Inc.
TMS28F200AET ti TMS28F200AET, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200AFB ti TMS28F200AFB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200AFT ti TMS28F200AFT, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200AMB ti TMS28F200AMB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200AMT ti TMS28F200AMT, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200ASB ti TMS28F200ASB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F200AST ti TMS28F200AST, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Memory
TMS28F200AXY 262 144 BY 8-bit/131 072 BY 16-bit Auto-select Boot-block Flash Memories
TMS28F200AZB ti TMS28F200AZB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Memory
TMS28F200AZT ti TMS28F200AZT, 131 072 BY 16-Bit, 262 144 BY 8-Bit Auto-select Boot-block Memory
TMS28F200BZ 262 144 BY 8-bit/131 072 BY 16-bit Boot-block Flash Memory
TMS28F200BZB80BDBJL ti TMS28F200BZB, 131 072 BY 16-Bit, 262 144 BY 8-Bit Boot-block Flash Memory
TMS28F210 ti TMS28F210, 65 536 BY 16-Bit Flash Memory
TMS28F400AEB ti TMS28F400AEB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AET ti TMS28F400AET, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot--bit Auto-select Boot-block Flash Memory
TMS28F400AFB ti TMS28F400AFB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AFT ti TMS28F400AFT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AMB ti TMS28F400AMB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AMT ti TMS28F400AMT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400ASB ti TMS28F400ASB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AST ti TMS28F400AST, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
Same catergory

AL4CS205 : Synchronous FIFO. 18-bit Synchronous Fifo. Preliminary version 1.0 Version 1.1, Add DC and AC timing data Version 1.2, modify 8.5 programmable timing selection Version 2.0, add 2 synchronous modes support to Programmable Flag timing selection table, change pin 49 definition from VCC to NC. Speed grade information update Company Contact Information updated 5.0 Pin Diagram 6 Block Diagram 7 Pin Definition.

AT25256Automotive : 256K, Spi Bus Serial Automotive EePROM, Supports Mode 0 And 3.. Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1) Medium-voltage and Standard-voltage Operation 5.0 (VCC 2.7 (VCC 5.5V) 3 MHz Clock Rate 64-byte Page Mode and Byte Write Operation Block Write Protection Protect 1/2, or Entire Array Write Protect (WP) Pin and Write Disable Instructions for both Hardware and Software.

DPS512X32BV3 : 512kx32 High Speed CMOS SRAM. : The DPS512X32BV3 `'VERSA-STACK'' module is a revolutionary new high speed memory subsystem using Dense-Pac Microsystems' ceramic Stackable Leadless Chip Carriers (SLCC) mounted on a co-fired ceramic substrate. It offers 16 Megabits of SRAM in a package envelope x 0.776 inches. The DPS512X32BV3 contains sixteen individual x 8 SRAMs, packaged in their.

EBS52UC8APFA : 512mb Unbuffered Sdram Dimm. The is 64M words 64 bits, 2 banks Synchronous Dynamic RAM Registered Module, mounted 16 pieces of 256M bits SDRAM sealed in TSOP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Fully.

GLT5160L16 : . u Single 0.3 V power supply u Clock frequency 100 MHz / 125 MHz / 143 MHz/ 166 MHz u Fully synchronous operation referenced to clock rising edge u Dual bank operation controlled by BA (Bank Address) u CAS latency- / 3 (programmable) u Burst length- Full Page (programmable) u Burst type- sequential / interleave (programmable) u Industrial grade available.

HYM72V32736T8 : 32Mx72 Bits PC133 Sdram Unbuffered Dimm Based on 32Mx8 Sdram With Lvttl, 4 Banks & 8K Refresh.

IS62VV25616L/LL : . High-speed access time: 70, 85, ns CMOS low power operation 36 mW (typical) operating 9 W (typical) CMOS standby Single 1.7V- 2.25 VDD power supply Fully static operation: no clock or refresh required Three state outputs Data control for upper and lower bytes Industrial temperature available Available in the 44-pin TSOP (Type II) and 48-pin mini BGA x 8.7mm).

M312L3313CT0 : = M312L3313CT0 32Mx72 DDR Sdram 184pin Dimm Based on 16Mx8 ;; Density(MB) = 256 ;; Organization = 32Mx72 ;; Bank/ Interface = 4B/SSTL2 ;; Refresh = 4K/64ms ;; Speed = A0,A2,B0 ;; Power = C,l ;; #of Pin = 184 ;; Component Composition = (16Mx8)x18 ;; Production Status = Eol ;; Comments = For Low Profile.

M466F0404CT2 : SODIMM. = M466F0404CT2 4M X 64 DRAM Sodimm Using 4M X 16, 4K Refresh 3.3V, Low Power/self-refresh ;; Density(MB) = 32 ;; Organization = 4Mx64 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 144 ;; Component Composition = (4Mx16)x4+EEPROM ;; Production Status = Eol ;; Comments = -.

M470L3224BT0 : = M470L3224BT0 32M X 64 200pin DDR Sdram Sodimm Based on 16M X 16 ;; Density(MB) = 256 ;; Organization = 32Mx64 ;; Bank/ Interface = 4B/SSTL2 ;; Refresh = 8K/64ms ;; Speed = A2,B0,A0 ;; #of Pin = 200 ;; Power = C,l ;; Component Composition = (16Mx16)x8 ;; Production Status = EOL(Aug.'02) ;; Comments = -.

M470L3224FT0 : = M470L3224FT0 200Pin Non Ecc / Ecc Sodimm Based on 256Mb F-die ;; Density(MB) = 256 ;; Organization = 32Mx64 ;; Bank/ Interface = 4B/SSTL2 ;; Refresh = 8K/64ms ;; Speed = CC,C4,B3,A2,B0 ;; #of Pin = 200 ;; Power = C,l ;; Component Composition = (16Mx16)x8 ;; Production Status = Customer Sample(July,'03) ;; Comments = DDR266/333/400.

TC55VD836FFI : SRAM - High Speed NtRAM. Organization = 256Kx36 ;; Speed = 133,143MHz ;; VDD(V) = 3.3 ;; Functionality = Ntram, Pipeline Burst, I-temp ;; Package = 100 LQFP.

WED2ZL64512S : SSRAM->NBL SSRAM MCP. Density = 32Mb ;; Organization = 512Kx64 ;; Speed MHZ = 100-150 ;; Volt = 2.5 ;; Package = 153 Pbga ;; Temp = C ;;.

IDT7008S15JG : 64K X 8 DUAL-PORT SRAM, 15 ns, PQCC84. s: Memory Category: SRAM Chip ; Density: 524 kbits ; Number of Words: 64 k ; Bits per Word: 8 bits ; Package Type: 1.15 X 1.15 INCH, 0.17 INCH HEIGHT, PLASTIC, LCC-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

K3N3U6000D-DC12 : 256K X 16 MASK PROM, 120 ns, PDIP40. s: Production Status: Full Production ; Density: 4194 kbits ; Number of Words: 256 k ; Bits per Word: 16 bits ; Access Time: 120 ns ; Logic Family: CMOS ; Supply Voltage: 3V ; Package Type: DIP, 0.600 INCH, DIP-40 ; Operating Range: Commercial ; Pins: 40 ; Operating Temperature: 0 to 70 C (32 to 158 F).

79C0408RTFE-12 : 512K X 8 EEPROM 5V MODULE, 120 ns, DMA40. s: Density: 4194 kbits ; Number of Words: 512 k ; Bits per Word: 8 bits ; Bus Type: Parallel ; Production Status: Full Production ; Access Time: 120 ns ; Supply Voltage: 5V ; Package Type: DFP-40 ; Pins: 40 ; Operating Range: Military ; Operating Temperature: -55 to 125 C (-67 to 257 F).

 
0-C     D-L     M-R     S-Z