Details, datasheet, quote on part number: TMS28F400AFT
PartTMS28F400AFT
CategorySemiconductors => Memory => Flash
Part familyTMS28F400AFT 262 144 By 16-Bit, 524 288 By 8-Bit Auto-Select Boot-Block Flash Memory
Descriptionti TMS28F400AFT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
CompanyTexas Instruments, Inc.
StatusOBSOLETE
ROHSNot Compliant
SampleNo
DatasheetDownload TMS28F400AFT datasheet
  
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
0

 

Features, Applications

By 8 Bits By 16 Bits Array-Blocking Architecture ­ One 16K-Byte Protected Boot Block ­ Two 8K-Byte Parameter Blocks ­ One 96K-Byte Main Block ­ Three 128K-Byte Main Blocks ­ Top or Bottom Boot Locations '28F400Axy Offers a User-Defined 8-Bit (Byte) or 16-Bit (Word) Organization '28F004Axy Offers Only the 8-Bit Organization Maximum Access / Minimum Cycle Time ­ Commercial and Extended 5-V VCC 10% 3.3-V VCC ns ­ Automotive (offered for only 5-V VCC voltage configurations) 5-V VCC or Z Depending on VCC / VPP Configuration) or B for Top or Bottom Boot-Block Configuration) 100 000 and 10 000 Program / Erase Cycle Versions Three Temperature Ranges ­ Commercial. 70°C ­ Extended. 85°C ­ Automotive. to 125°C Industry Standard Packages Offered ­ 40-Pin TSOP (DCD Suffix) ­ 44-Pin PSOP (DBJ Suffix) ­ 48-Pin TSOP (DCD Suffix) Low Power Dissipation ( VCC ) ­ Active Write. mW ( Byte Write) ­ Active Read. mW ( Byte Read) ­ Active Write. mW ( Word Write) ­ Active Read. mW ( Word Read) ­ Block Erase. mW ­ Standby. 0.72 mW (CMOS-Input Levels)

PIN NOMENCLATURE ­ A17 BYTE NC RP VCC VPP VSS W DU/WP Address Inputs Byte Enable Data In / Out Data In / Out (word-wide mode), Low-Order Address (byte-wide mode) Chip Enable Output Enable No Internal Connection Reset / Deep Power-Down Power Supply Power Supply for Program / Erase Ground Write Enable Do Not Use for 'AMy or 'AZy /Write Protect

Fully Automated On-Chip Erase and Word / Byte Program Operations Write Protection for Boot Block Industry Standard Command-State Machine (CSM) ­ Erase Suspend/Resume ­ Algorithm-Selection Identifier Three Different Combinations of Supply Voltages Offered All Inputs / Outputs TTL Compatible

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Table of Contents description. 3 read operations. device symbol nomenclature. 5 programming operations. functional block diagram. 6 erase operations. architecture. 6 automatic power-saving mode. block memory maps. 6 reset / deep power-down mode. boot-block data protection. 8 power-supply detection. parameter block. 8 absolute maximum ratings. main block. 8 capacitance. data protection. 8 TMS28F004ASy and TMS28F400ASy. command-state machine (CSM). 8 TMS28F004AEy and TMS28F400AEy. operation. 9 TMS28F004AMy and TMS28F400AMy. command definitions. 9 TMS28F004AFy and TMS28F400AFy. status register. 10 TMS28F004AZy and TMS28F400AZy. byte-wide or word-wide mode selection. 11 Parameter Measurement Information. command-state machine (CSM) operations. 13 mechanical data ­ DBJ (R-PDSO-G44). clear status register. 13 mechanical data ­ DCD (R-PDSO-G**).

description

The by 8 bits by 16 bits 194 304-bit), boot-block flash memory that can be electrically block-erased and reprogrammed. The TMS28F400Axy is organized in a blocked architecture consisting of:

One 16K-byte protected boot block Two 8K-byte parameter blocks One 96K-byte main block Three 128K-byte main blocks

Table 1 lists the five different voltage configurations available for ordering. Operation 256K-word (16-bit) organization is user-definable. Table 1. VCC/VPP Voltage Configurations, Temperature, and Speeds Matrix

DEVICE CONFIGURATION DEVICE TMS28F400AEy TMS28F400AMy READ (VCC) 5 V±10% PROGRAM/ERASE (VPP) 12 V±10% TEMPERATURE (TA) to 125°C Only the 44-pin PSOP is offered in the to 125°C temperature range. NOTE 1: All configurations are available in the TMS28F004Axy (8 bit configuration only) and top or bottom boot. ACCESS SPEEDS ­ 5-V(3.3-V) VCC 90 ns


 

Related products with the same datasheet
TMS28F400AFT70BDBJL
TMS28F400AFT70BDCDL
TMS28F400AFT80BDBJL
TMS28F400AFT80BDCDL
TMS28F400AFT90BDBJL
Some Part number from the same manufacture Texas Instruments, Inc.
TMS28F400AFT70BDBJL ti TMS28F400AFT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AMB ti TMS28F400AMB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AMT ti TMS28F400AMT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400ASB ti TMS28F400ASB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AST ti TMS28F400AST, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AXY 524 288 BY 8-bit/262 144 BY 16-bit Auto-select Boot-block Flash Memories
TMS28F400AZB ti TMS28F400AZB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AZT ti TMS28F400AZT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400BZ 524 288 BY 8-bit/262 144 BY 16-bit Boot-block Flash Memory
TMS28F400BZB90BDBJL ti TMS28F400BZB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Boot-block Flash Memory
TMS28F512A 65 536 BY 8-bit Flash Memory
TMS28F512A-10C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-12C3 65 536 BY 8-bit Flash Memory
TMS28F512A-12C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-15C3 65 536 BY 8-bit Flash Memory
TMS28F512A-15C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-17C3 65 536 BY 8-bit Flash Memory
TMS28F800ALB10BDCDE ti TMS28F800ALB, 1 048 576 BY 8-Bit, 524 288 BY 16-Bit Autoselect Boot Block Flash Memory
TMS28F800ALT12BDCDE ti TMS28F800ALT, 1 048 576 BY 8-Bit, 524 288 BY 16-Bit Autoselect Boot Block Flash Memory
TMS29F002 262 144 BY 8-bit Flash Memory
TMS29F002R
Same catergory

Am29DL16 : 16 Megabit (2 M X 8-Bit/1 M X 16-Bit) Boot Sector. July 2003 The following document specifies Spansion memory products that are now offered by both Advanced Micro Devices and Fujitsu. Although the document is marked with the name of the company that originally developed the , these products will be offered to customers of both AMD and Fujitsu. There is no change to this datasheet as a result of offering.

AT49F002NT : 2-megabit (256kx8) 5v Only CMOS Flash Memory. ­ 5V Read ­ 5V Reprogramming Fast Read Access Time 55 ns Internal Program Control and Timer Sector Architecture ­ One 16K Byte Boot Block with Programming Lockout ­ Two 8K Byte Parameter Blocks ­ Two Main Memory Blocks (96K, 128K Bytes) Fast Erase Cycle Time - 10 seconds Byte-by-byte Programming - 10 µs/Byte Typical Hardware Data Protection DATA Polling.

CXK77P18E160GB : 16mb LW R-l HSTL High Speed Synchronous SRAMs ( 512k X 36 or 1m X 18 ).

HYM71V16M655BLT8 : ->SO DIMM. based on 16Mx8 SDRAM with LVTTL, 4 banks & 4K Refresh The Hynix HYM71V16M655B(L)T8 Series are 16Mx64bits Synchronous DRAM Modules. The modules are composed of eight 16Mx8bits CMOS Synchronous DRAMs 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package a 144pin glass-epoxy printed circuit board. One 0.22uF and one 0.0022uF decoupling capacitors.

HYM72V32C736T8 : 32Mx72 Bits PC133 Sdram Registered Dimm With Pll, Based on 32Mx8 Sdram With Lvttl, 4 Banks & 8K Refresh.

HYMD264726B8J : 512 MB. Hynix HYMD264726B8J series is unbuffered 184-pin double data rate Synchronous DRAM Dual In-Line Memory Modules(DIMMs) which are organized as 64Mx72 high-speed memory arrays. Hynix HYMD264726B8J series consists of eighteen 32Mx8 DDR SDRAM in 400mil TSOPII packages a 184pin glass-epoxy substrate. Hynix HYMD264726B8J series provide a high performance 8-byte.

M390S1723ETU : Registered DIMM. = M390S1723ETU 168Pin Unbuffered Dimm Based on 128Mb E-die (x4, X8) ;; Density(MB) = 128 ;; Organization = 16Mx72 ;; Bank/ Interface = 4B/LVTTL ;; Refresh = 4K/64ms ;; Speed = 7A ;; #of Pin = 168 ;; Power = C ;; Component Composition = (16Mx8)x9+EEPROM ;; Production Status = Mass Production ;; Comments = PC133.

M5M51008CP-70X : 1048576-bit (131072-word BY 8-bit) CMOS Static RAM. The M5M51008CP,FP,VP,RV,KV,KR are a 1048576-bit CMOS static RAM organized as 131072 word by 8-bit which are fabricated using high-performance quadruple-polysilicon and double metal CMOS technology. The use of thin film transistor (TFT) load cells and CMOS periphery result in a high density and low power static RAM. They are low standby current and low operation.

MX23L1651 : 16M, 16Mx1. GENERAL x 1 bit structure Single Power Supply Operation to 3.6 volt for read operations Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE High Performance - Fast access time: 20MHz serial clock + 1TTL Load) Low Power Consumption - Low active read current: 10mA (typical) 20MHz - Low standby current: 30uA (CMOS) SOFTWARE Input Data Format - 1-byte.

NM27C512 : 524,288-bit ( 64k X 8 ) High Performance CMOS EPROM. The is a high performance 512K UV Erasable Electrically Programmable Read Only Memory (EPROM). It is manufactured using Fairchild's proprietary CMOS AMGTM EPROM technology for an excellent combination of speed and economy while providing excellent reliability. The NM27C512 provides microprocessor-based systems storage capacity for portions of operating.

NM27LV210 : 1,048,576-bit ( 64k X 16 ) Low Voltage EPROM. The is a high performance Low Voltage Electrical Programmable read only memory. It is manufactured using Fairchild's latest EPROM technology. This technology allows the part to operate at high speeds. This Low Voltage and Low Power EPROM is designed with power sensitive hand held and portable battery products in mind. This allows for code storage of firmware.

W51300 : Flash VR Controller.

K4T1G084QA : 1Gb A-die DDR2 SDRAM The 1Gb DDR2 SDRAM is organized as a 32Mbit x 4 I/Os x 8 banks, 16Mbit x 8 I/Os x 8banks or 8Mbit x 16 I/Os x 8banks device. This synchronous device achieves high speed double-data-rate transfer rates of up to 667Mb/sec/pin (DDR2-667) for general applications. The chip is designed to comply with the following key DDR2 SDRAM such.

KFN2G16Q2M : MuxOneNAND™ 2G MuxOneNAND™ is a monolithic integrated circuit with a NAND Flash array using a NOR Flash interface. This device includes control logic, a NAND Flash array, and 5KB of internal BufferRAM..

W3E32M72S : 32Mx72 DDR SDRAM The 256MByte (2Gb) DDR SDRAM is a high-speed CMOS, dy nam ic ran dom-access, memory using 5 chips containing 536,870,912 bits. Each chip is internally configured as a quad-bank DRAM..

M65KA256AF8W8 : 16M X 16 SYNCHRONOUS DRAM, 6 ns, UUC. s: Memory Category: DRAM Chip ; Density: 268435 kbits ; Number of Words: 16000 k ; Bits per Word: 16 bits ; Package Type: WAFER ; Supply Voltage: 1.8V ; Access Time: 6 ns ; Operating Temperature: -30 to 85 C (-22 to 185 F).

WEDPND8M72S-200BC : 8M X 72 DDR DRAM MODULE, 0.8 ns, PBGA219. s: Memory Category: DRAM Chip ; Density: 603980 kbits ; Number of Words: 8000 k ; Bits per Word: 72 bits ; Package Type: BGA, 32 X 25 MM, PLASTIC, BGA-219 ; Pins: 219 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Access Time: 0.8000 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

 
0-C     D-L     M-R     S-Z