Details, datasheet, quote on part number: TMS28F400AXY
PartTMS28F400AXY
CategoryMemory => Flash => Parallel Flash => 4M
Title4M
Description524 288 BY 8-bit/262 144 BY 16-bit Auto-select Boot-block Flash Memories
CompanyTexas Instruments, Inc.
DatasheetDownload TMS28F400AXY datasheet
  

 

Features, Applications

By 8 Bits By 16 Bits Array-Blocking Architecture One 16K-Byte Protected Boot Block Two 8K-Byte Parameter Blocks One 96K-Byte Main Block Three 128K-Byte Main Blocks Top or Bottom Boot Locations '28F400Axy Offers a User-Defined 8-Bit (Byte) or 16-Bit (Word) Organization '28F004Axy Offers Only the 8-Bit Organization Maximum Access / Minimum Cycle Time Commercial and Extended 5-V VCC 10% 3.3-V VCC ns Automotive (offered for only 5-V VCC voltage configurations) 5-V VCC or Z Depending on VCC / VPP Configuration) or B for Top or Bottom Boot-Block Configuration) 100 000 and 10 000 Program / Erase Cycle Versions Three Temperature Ranges Commercial. 70C Extended. 85C Automotive. to 125C Industry Standard Packages Offered 40-Pin TSOP (DCD Suffix) 44-Pin PSOP (DBJ Suffix) 48-Pin TSOP (DCD Suffix) Low Power Dissipation ( VCC ) Active Write. mW ( Byte Write) Active Read. mW ( Byte Read) Active Write. mW ( Word Write) Active Read. mW ( Word Read) Block Erase. mW Standby. 0.72 mW (CMOS-Input Levels)

PIN NOMENCLATURE A17 BYTE NC RP VCC VPP VSS W DU/WP Address Inputs Byte Enable Data In / Out Data In / Out (word-wide mode), Low-Order Address (byte-wide mode) Chip Enable Output Enable No Internal Connection Reset / Deep Power-Down Power Supply Power Supply for Program / Erase Ground Write Enable Do Not Use for 'AMy or 'AZy /Write Protect

Fully Automated On-Chip Erase and Word / Byte Program Operations Write Protection for Boot Block Industry Standard Command-State Machine (CSM) Erase Suspend/Resume Algorithm-Selection Identifier Three Different Combinations of Supply Voltages Offered All Inputs / Outputs TTL Compatible

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Table of Contents description. 3 read operations. device symbol nomenclature. 5 programming operations. functional block diagram. 6 erase operations. architecture. 6 automatic power-saving mode. block memory maps. 6 reset / deep power-down mode. boot-block data protection. 8 power-supply detection. parameter block. 8 absolute maximum ratings. main block. 8 capacitance. data protection. 8 TMS28F004ASy and TMS28F400ASy. command-state machine (CSM). 8 TMS28F004AEy and TMS28F400AEy. operation. 9 TMS28F004AMy and TMS28F400AMy. command definitions. 9 TMS28F004AFy and TMS28F400AFy. status register. 10 TMS28F004AZy and TMS28F400AZy. byte-wide or word-wide mode selection. 11 Parameter Measurement Information. command-state machine (CSM) operations. 13 mechanical data DBJ (R-PDSO-G44). clear status register. 13 mechanical data DCD (R-PDSO-G**).

description

The by 8 bits by 16 bits 194 304-bit), boot-block flash memory that can be electrically block-erased and reprogrammed. The TMS28F400Axy is organized in a blocked architecture consisting of:

One 16K-byte protected boot block Two 8K-byte parameter blocks One 96K-byte main block Three 128K-byte main blocks

Table 1 lists the five different voltage configurations available for ordering. Operation 256K-word (16-bit) organization is user-definable. Table 1. VCC/VPP Voltage Configurations, Temperature, and Speeds Matrix

DEVICE CONFIGURATION DEVICE TMS28F400AEy TMS28F400AMy READ (VCC) 5 V10% PROGRAM/ERASE (VPP) 12 V10% TEMPERATURE (TA) to 125C Only the 44-pin PSOP is offered in the to 125C temperature range. NOTE 1: All configurations are available in the TMS28F004Axy (8 bit configuration only) and top or bottom boot. ACCESS SPEEDS 5-V(3.3-V) VCC 90 ns


 

Some Part number from the same manufacture Texas Instruments, Inc.
TMS28F400AZB ti TMS28F400AZB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400AZT ti TMS28F400AZT, 262 144 BY 16-Bit, 524 288 BY 8-Bit Auto-select Boot-block Flash Memory
TMS28F400BZ 524 288 BY 8-bit/262 144 BY 16-bit Boot-block Flash Memory
TMS28F400BZB90BDBJL ti TMS28F400BZB, 262 144 BY 16-Bit, 524 288 BY 8-Bit Boot-block Flash Memory
TMS28F512A 65 536 BY 8-bit Flash Memory
TMS28F512A-10C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-12C3 65 536 BY 8-bit Flash Memory
TMS28F512A-12C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-15C3 65 536 BY 8-bit Flash Memory
TMS28F512A-15C4FML ti TMS28F512A, 65 536 BY 8-Bit Flash Memory
TMS28F512A-17C3 65 536 BY 8-bit Flash Memory
TMS28F800ALB10BDCDE ti TMS28F800ALB, 1 048 576 BY 8-Bit, 524 288 BY 16-Bit Autoselect Boot Block Flash Memory
TMS28F800ALT12BDCDE ti TMS28F800ALT, 1 048 576 BY 8-Bit, 524 288 BY 16-Bit Autoselect Boot Block Flash Memory
TMS29F002 262 144 BY 8-bit Flash Memory
TMS29F002R
TMS29F002RB-10BFML ti TMS29F002RB, 262 144 BY 8-Bit Boot Block Flash Memory
TMS29F002RT-10BFML ti TMS29F002RT, 262 144 BY 8-Bit Boot Block Flash Memory
TMS29F010 131 072 BY 8-bit Flash Memory
TMS29F010-12C5FME ti TMS29F010, 1 048 576-Bit Flash Memory
TMS29F010-15 131 072 BY 8-bit Flash Memory
TMS29F010-70C5FME ti TMS29F010, 1 048 576-Bit Flash Memory
Same catergory

AAM29LL800BB-150EC : 8 Megabit ( 1 M X 8-bit/512 K X 16-bit ) CMOS 2.2 Volt-only Boot Sector Flash Memory.

AM29LV116BB-120 : . 16 Megabit x 8-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory s Single power supply operation Full voltage range: to 3.6 volt read and write operations for battery-powered applications Regulated voltage range: to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors s Manufactured 0.32 m process technology.

CY7C09269A-12AC : Multi-Port RAM. 5V Synchronous Dual-port Memory. True dual-ported memory cells which allow simultaneous access of the same memory location Two Flow-Through/Pipelined devices x 16/18 organization (CY7C09269A/369A) Three Modes Flow-Through Pipelined Burst Pipelined output mode on both ports allows fast 100MHz cycle time 0.35-micron CMOS for optimum speed/power High-speed clock to data access 6.5[1]/7.5/9/12.

LH28F640BFHE-PTTL80 : 64M Top Boot Block Flash. Handle this document carefully for it contains material protected by international copyright law. Any reproduction, full or in part, of this material is prohibited without the express written permission of the company. When using the products covered herein, please observe the conditions written herein and the precautions outlined in the following paragraphs.

M27W102-100B6TR : 1 Mbit 64kb X16 Low Voltage uv EPROM And OTP EPROM. to 3.6V LOW VOLTAGE in READ OPERATION READ ACCESS TIME: 70ns at VCC 80ns at VCC to 3.6V PIN COMPATIBLE with M27C1024 LOW POWER CONSUMPTION: 15A max Standby Current 15mA max Active Current at 5MHz PROGRAMMING TIME 100s/word HIGH RELIABILITY CMOS TECHNOLOGY 2,000V ESD Protection 200mA Latchup Protection Immunity ELECTRONIC SIGNATURE Manufacturer.

M29F200BB45M1T : 2 Mbit 256kb x8 or 128kb X16, Boot Block Single Supply Flash Memory. 2 Mbit 128Kb x16, Boot Block) Single Supply Flash Memory SINGLE 5V10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 45ns PROGRAMMING TIME 8s per Byte/Word typical 7 MEMORY BLOCKS 1 Boot Block (Top or Bottom Location) 2 Parameter and 4 Main Blocks PROGRAM/ERASE CONTROLLER Embedded Byte/Word Program algorithm Embedded.

M372F0803BJ0 : Buffered DIMM. = M372F0803BJ0 8Mx72 DRAM Dimm With Ecc Using 8Mx8,4K&8K Refresh,3.3V ;; Density(MB) = 64 ;; Organization = 8Mx72 ;; Mode = Edo ;; Refresh = 4K/64ms ;; Speed(ns) = 50,60 ;; #of Pin = 168 ;; Component Composition = (8Mx8)x9+Drive ICx2 ;; Production Status = Eol ;; Comments = Buffered.

M390S2858AT1 : Registered DIMM. = M390S2858AT1 128Mx72 Sdram Dimm With PLL & Register Based on Stacked 128Mx4, 4Banks 8K Ref., 3.3V Sdrams With SPD ;; Density(MB) = 1024 ;; Organization = 128Mx72 ;; Bank/ Interface = 4B/LVTTL ;; Refresh = 8K/64ms ;; Speed = 75 ;; #of Pin = 168 ;; Power = C ;; Component Composition = (128Mx4)x18+Drive ICx3+PLL+EEPROM ;; Production.

M48Z58 : Zeropower. 64 Kbit (8KB X 8) Zeropower SRAM. SUMMARY s INTEGRATED, ULTRA LOW POWER SRAM, POWER-FAIL CONTROL CIRCUIT, and BATTERY READ CYCLE TIME EQUALS WRITE CYCLE TIME AUTOMATIC POWER-FAIL CHIP DESELECT and WRITE PROTECTION WRITE PROTECT VOLTAGES: (VPFD = Power-fail Deselect Voltage) M48Z58: VCC 5.5V 4.5V VPFD 5.5V 4.2V VPFD 4.5V SELF-CONTAINED BATTERY IN THE CAPHATTM DIP PACKAGE PACKAGING.

MB84VA2006 : 8m ( X 8/x 16 ) Flash Memory & 1m ( X 8 ) Static RAM. Power supply voltage 3.6 V High performance 100 ns maximum access time Operating Temperature to +85C FLASH MEMORY Minimum 100,000 write/erase cycles Sector erase architecture One 16 K byte, two 8 K bytes, one 32 K byte, and fifteen 64 K bytes. Any combination of sectors can be concurrently erased. Also supports full chip erase. Boot Code Sector Architecture.

MS82V16520 : 262,144-word X 32-bit X 2-bank Synchronous Graphics RAM. This version: Jul. 1999 MS82V16520 Previous version: Sep. 1998 The is a synchronous graphics random access memory organized 256 K words 32 bits 2 banks. This device can operate to 143 MHz by using synchronous interface. In addition, it has 8-column Block Write function and Write per bit function which improves performance in graphics systems. 262,144.

THMY12E11A70 : Form = DIMM-168 Pin ;; Type = Unbuffered ;; Density (MB) = 128MB ;; Config. = 16Mx72 ;; Comp. = 16Mx8 ;; = PC100, PC133 ;; Date = 2001/05/18.

W27E010P : 128kx8, 1m, 5v, 70, Chip Erase, :dip/ P:plcc. The is a high speed, low power Electrically Erasable and Programmable Read Only Memory organized 8 bits that operates on a single 5 volt power supply. The W27E010 provides an electrical chip erase function. High speed access time: 45/55/70/90/120 nS (max.) Read operating current: 30 mA (typ.) Erase/Programming operating current: 1 mA (typ.) Standby.

XC17S05 : The Spartan Family of Serial Configuration Prom. The Spartan Family of Serial Configuration PROMs provide easy-to-use, cost-effective configuration memory for Xilinx Field Programmable Gate Arrays. These devices use a simple serial-access procedure to configure one or more LCA devices. The user can select the polarity of the reset function by programming a special bit. These devices are fully compatible.

DS1350W : DS1350W 3.3V 4096K Nonvolatile SRAM With Battery Monitor The DS1350W 3.3V 4096k Nonvolatile SRAM is a 4,194,304-bit, fully static, nonvolatile SRAM organized as 524,288 words by eight bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition.

DS1230W : 3.3V 256k Nonvolatile SRAM The DS1230W 3.3V 256k NV SRAM is a 262,144-bit, fully static, nonvolatile SRAM organized as 32,768 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry, which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically.

H5DU6462CTR-E3 : 4M X 16 DDR DRAM, PBGA66. s: Memory Category: DRAM Chip ; Density: 67109 kbits ; Number of Words: 4000 k ; Bits per Word: 16 bits ; Package Type: TSOP, 0.400 X 0.875 INCH, 0.65 MM PITCH, HALOGEN FREE AND ROHS COMPLIANT, TSOP2-66 ; Pins: 66 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Operating Temperature: 0 to 70 C (32 to 158 F).

W9464G6BH : 4M X 16 DDR DRAM, 0.75 ns, PDSO66. s: Memory Category: DRAM Chip ; Density: 67109 kbits ; Number of Words: 4000 k ; Bits per Word: 16 bits ; Package Type: TSSOP, 0.400 X 0.875 INCH, 0.65 MM PITCH, ROHS COMPLIANT, TSSOP2-66 ; Pins: 66 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Access Time: 0.7500 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

 
0-C     D-L     M-R     S-Z