Details, datasheet, quote on part number: TMS320BC57S
CategorySemiconductors => Processors => Other Processors
Part familyTMS320BC57S Digital Signal Processors
Title320 Family
DescriptionDigital Signal Processors 144-LQFP
CompanyTexas Instruments, Inc.
ROHSNot Compliant
DatasheetDownload TMS320BC57S datasheet
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
144PGELQFPS-PQFP-G57 20201.4.5
Application notes
• A PCMCIA TMS320 DSP MediaCard for Sound and Fax/Modem Applications
This document describes the system architecture of the TMS320 digital signal processor (DSP) PCMCIA media card and its operation. Operational examples are provided for setting up the DSP, for loading and executing single and multiple algorithms, and for re | Doc
• Calculation Of TMS320C5x Power Dissipation
The power supply current requirements for the 16-bit fixed-point TMS320C5x digital signal processor (DSP) depend not only on the device functionality, but also on the system parameters. This document describes the techniques for analyzing the system and de | Doc
• Telecommunications Applications With the TMS320C5x
This book provides an overview of the TMS320C5x 16-bit fixed-point digital signal processor (DSP) family and its use in telecommunication applications. Each section provides application specific information about the following topics: digital cell systems, | Doc
• Setting Up TMS320 DSP Interrupts in 'C'
Four steps are required to set the TMS320 DSP interrupts: create a interrupt service routine, initialize the vector table and set the memory map, enable the interrupts in the CPU, and enable the interrupt sources. This document shows how to set the interru | Doc
• Improving 32-Channel DTMF Decoders in PBX Systems Using the TMS320C5x DSP
Using a DSP to perform multi-channel DTMF decoding can decrease PBX system cost while increasing system performance and flexibility. This document presents an improved technique for 32-channel DTMF decoding using the TMS320C5x 16-bit fixed-point DSP. The a | Doc
• Use of the TMS320C5x Internal Oscillator With External Crystals or Resonators
The TMS320C5x high-speed 16-bit fixed-point DSP allows considerable flexibility to meet a wide range of clock requirements. This document provides information on crystal and ceramic resonators, their frequency characteristic, a background on oscillators, a | Doc
• Minimizing Quantization Effects Using the TMS320 DSP Family
Due to its discrete nature, DSPs represent variables and performs arithmetic functions with a finite word length. This produces three effects: the selection of filter transfer functions is quantized with filter poles and zeros existing only at specific loc | Doc


Features, Applications

Powerful 16-Bit TMS320C5x CPU 25-, 35-, and 50-ns Single-Cycle Instruction Execution Time for 5-V Operation 25-, 40-, and 50-ns Single-Cycle Instruction Execution Time for 3-V Operation Single-Cycle 16-Bit Multiply/Add 16-Bit Maximum Addressable External Memory Space (64K Program, 64K Data, 64K I/O, and 32K Global) 16-Bit Single-Access On-Chip Program ROM 16-Bit Single-Access On-Chip Program / Data RAM (SARAM) 1K Dual-Access On-Chip Program / Data RAM (DARAM) Full-Duplex Synchronous Serial Port for Coder/Decoder Interface Time-Division-Multiplexed (TDM) Serial Port Hardware or Software Wait-State Generation Capability On-Chip Timer for Control Operations Repeat Instructions for Efficient Use of Program Space Buffered Serial Port Host Port Interface

Multiple Phase-Locked Loop (PLL) Clocking Options Depending on Device) Block Moves for Data/Program Management On-Chip Scan-Based Emulation Logic Boundary Scan Five Packaging Options 100-Pin Quad Flat Package (PJ Suffix) 100-Pin Thin Quad Flat Package (PZ Suffix) 128-Pin Thin Quad Flat Package (PBK Suffix) 132-Pin Quad Flat Package (PQ Suffix) 144-Pin Thin Quad Flat Package (PGE Suffix) Low Power Dissipation and Power-Down Modes: mA / MIP) V, 40-MHz Clock (Average) mA / MIP) V, 40-MHz Clock (Average) V, 40-MHz Clock (IDLE1 Mode) V, 40-MHz Clock (IDLE2 Mode) 5 V, Clocks Off (IDLE2 Mode) High-Performance Static CMOS Technology IEEE Standard 1149.1 Test-Access Port (JTAG)


The TMS320C5x generation of the Texas Instruments (TITM ) TMS320 digital signal processors (DSPs) is fabricated with static CMOS integrated circuit technology; the architectural design is based upon that of an earlier TI DSP, the TMS320C25. The combination of advanced Harvard architecture, on-chip peripherals, on-chip memory, and a highly specialized instruction set is the basis of the operational flexibility and speed of the 'C5x devices. They execute to 50 million instructions per second (MIPS). The 'C5x devices offer these advantages:

Enhanced TMS320 architectural design for increased performance and versatility Modular architectural design for fast development of spin-off devices Advanced integrated-circuit processing technology for increased performance Upward-compatible source code (source code for 'C1x and 'C2x DSPs is upward compatible with 'C5x DSPs.) Enhanced TMS320 instruction set for faster algorithms and for optimized high-level language operation New static-design techniques for minimizing power consumption and maximizing radiation tolerance

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. is a trademark of Texas Instruments Incorporated. IEEE Standard 1149.11990, IEEE Standard Test-Access Port and Boundary-Scan Architecture References 'C5x in this document include both TMS320C5x and TMS320LC5x devices unless specified otherwise.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Table 1 provides a comparison of the devices in the 'C5x generation. It shows the capacity of on-chip RAM and ROM memories, number of serial and parallel I/O ports, execution time of one machine cycle, and type of package with total pin count. Table 1. Characteristics of the 'C5x Processors

ON-CHIP MEMORY (16-BIT WORDS) TMS320 DEVICES DARAM DATA TMS320LC57 TMS320C57S DATA + PROG SARAM DATA + PROG 3K 6K ROM PROG 32K 2K I/O PORTS SERIAL PARALLEL 64K + HPI 64K + HPI 64K + HPI POWER SUPPLY (V) CYCLE TIME (ns) PACKAGE TYPE QFP 132 pin 132 pin 100/132 pin 100/132 pin 100 pin 100 pin 132 pin 132 pin 100 pin 100 pin 100 pin 128 pin 144 pin 144 pin

6K 2K Sixteen of the 64K parallel I/O ports are memory mapped. QFP = Quad flatpack ROM boot loader available TDM serial port not available # Includes auto-buffered serial port (BSP) but TDM serial port not available HPI = Host port interface




Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
TMS320BC57S-25 Tms320c5x Fixed Point DSP
TMS320BC57SPGE57 ti TMS320BC57S, Digital Signal Processors
TMS320C10 Tms320c1x Fixed Point DSP
TMS320C10FNA ti TMS320C10, Digital Signal Processor
TMS320C10M Tms320c1x Fixed Point DSP
TMS320C10NA ti TMS320C10, Digital Signal Processor
TMS320C14 Tms320c1x Fixed Point DSP
TMS320C14FNL ti TMS320C14, Digital Signal Processors
TMS320C15 Tms320c1x Fixed Point DSP
TMS320C15FNA ti TMS320C15, Digital Signal Processors
TMS320C16 Tms320c1x Fixed Point DSP
TMS320C16PGL ti TMS320C16, Digital Signal Processors
TMS320C17 Tms320c1x Fixed Point DSP
TMS320C17FNL ti TMS320C17, Digital Signal Processors
TMS320C1X Digital Signal Processors
TMS320C203PZ ti TMS320C203, Digital Signal Processor
TMS320C206 Digital Signal Processors
TMS320C206PZ80 ti TMS320C206, Digital Signal Processor
TMS320C209 Digital Signal Processors

CD4044BD : ti CD4044B, CMOS Quad NAND R/s Latch With 3-State Outputs

DAC7800LP : ti DAC7800, Dual Monolithic CMOS 12-Bit Multiplying Digital-to-analog Converter

PT6601 : Non-Isolated DC-DC Converters

SN74ALVCH16601DL : Universal Bus Transceivers (UBTs) ti SN74ALVCH16601, 18-Bit Universal Bus Transceiver With 3-State Outputs

TPS9110 : Cellular Subscriber Terminal Power Supply

SN75179 : Differential Driver AND Receiver PAIR

SMJ4C1024-12HK : 1048576 BY 1-bit Dynamic Random-access Memory

PCM3052ARTFR : IC, AUDIO CODEC, 24BIT, 96KHZ, QFN-32 Specifications: Audio CODEC Type: Stereo ; No. of ADCs: 2 ; No. of DACs: 2 ; No. of Input Channels: 2 ; No. of Output Channels: 2 ; ADC / DAC Resolution: 24bit ; ADCs / DACs Signal to Noise Ratio: 105dB ; Sampling Rate: 96kSPS ; IC Interface Type: I2C ; Supply Voltage Range: 4.5V to 5.5V, 3V to 3.6V

TPS3837L30DBVTG4 : Power

UC2852NG4 : Pmic - Pfc (power Factor Correction) Integrated Circuit (ics) Tube 400A 16.3 V ~ 30 V; IC PFC CONTROLLER CCM 8DIP Specifications: Packaging: Tube ; Package / Case: 8-DIP (0.300", 7.62mm) ; Voltage - Supply: 16.3 V ~ 30 V ; Mode: Continuous Conduction (CCM) ; Frequency - Switching: 200kHz ; Current - Startup: 400A ; Operating Temperature: -40C ~ 85C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

THS4551IDGKT : Differential Amplifiers Low Noise, Precision, 150MHz, Fully Differential Amplifier 8-VSSOP -40 to 125 Texas Instruments THS4551 Fully Differential Amplifier offers an easy interface from single-ended sources to the differential output required by high-precision analog-to-digital converters (ADCs). These are designed for exceptional dc accuracy, low noise, and robust capacitive load driving. This

0-C     D-L     M-R     S-Z