Details, datasheet, quote on part number: TMS320F2808ZGMQ
CategoryDSPs (Digital Signal Processors)
Description32-Bit Digital Signal Controller with Flash
High-Performance Static CMOS Technology
100 MHz (10-ns Cycle Time)
Low-Power (1.8-V Core, 3.3-V I/O) Design
3.3-V Flash Voltage
JTAG Boundary Scan Support
High-Performance 32-Bit CPU (TMS320C28x)
16 x 16 and 32 x 32 MAC Operations
16 x 16 Dual MAC
Harvard Bus Architecture
Atomic Operations
Fast Interrupt Response and Processing
Unified Memory Programming Model
Code-Efficient (in C/C++ and Assembly)
On-Chip Memory
F2808: 64K X 16 Flash, 18K X 16 SARAM
F2806: 32K X 16 Flash, 10K X 16 SARAM
F2801: 16K X 16 Flash, 6K X 16 SARAM
1K x 16 OTP ROM
Boot ROM (4K x 16)
With Software Boot Modes (via SCI, SPI, CAN, I2C, and Parallel I/O)
Standard Math Tables
Clock and System Control
Dynamic PLL Ratio Changes Supported
On-Chip Oscillator
Clock-Fail-Detect Mode
Watchdog Timer Module
Any GPIO A Pin Can Be Connected to One of the Three External Core Interrupts
Peripheral Interrupt Expansion (PIE) Block That Supports All 43 Peripheral Interrupts
128-Bit Security Key/Lock
Protects Flash/OTP/L0/L1 Blocks
Prevents Firmware Reverse Engineering
Enhanced Control Peripherals
Up to 16 PWM Outputs
Up to Four Capture Inputs
Up to Two Quadrature Encoder Interfaces
Up to Six 32-bit Timers
Up to Six 16-bit Timers
Serial Port Peripherals
Up to 4 Serial Peripheral Interface (SPI) Modules
Up to 2 Serial Communications Interface (SCI), Standard UART Modules
Up to 2 Enhanced Controller Area Network (eCAN) Modules
One Inter-Integrated-Circuit (I2C) Bus
12-Bit ADC, 16 Channels
2 x 8 Channel Input Multiplexer
Two Sample-and-Hold
Single/Simultaneous Conversions
Fast Conversion Rate: 160 ns/6.25 MSPS
Internal or External Reference
Three 32-Bit CPU-Timers
Up to 35 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins With Input Filtering
Advanced Emulation Features
Analysis and Breakpoint Functions
Real-Time Debug via Hardware
Development Tools Include
ANSI C/C++ Compiler/Assembler/Linker
Supports TMS320C24x™/240x Instructions
Code Composer Studio™ IDE
JTAG Scan Controllers [Texas Instruments (TI) or Third-Party]
Evaluation Modules
Broad Third-Party Digital Motor Control Support
Low-Power Modes and Power Savings
IDLE, STANDBY, HALT Modes Supported
Disable Individual Peripheral Clocks
Package Options
Thin Quad Flatpack (PZ) (2808, 2806, 2801)
MicroStar BGA (GGM, ZGM) (2808, 2806, 2801)
Temperature Options:
A: –40°C to 85°C
S: –40°C to 125°C
Q: –40°C to 125°C
CompanyTexas Instruments, Inc.
DatasheetDownload TMS320F2808ZGMQ datasheet
Find where to buy
PackagesBGA MICROSTAR (ZGM) | 100


Features, Applications

ADVANCE INFORMATION concerns new products in the sampling or preproduction phase of development. Characteristic data and other specifications are subject to change without notice.

IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated

This data sheet revision history highlights the technical changes made to the SPRS230B device-specific data sheet to make an SPRS230C revision. Scope: This document has been reviewed for technical accuracy; the technical content is up-to-date as of the specified release date with the following changes.

ADDITIONS/CHANGES/DELETIONS Changed from Product Preview to Advance Information Added Q temperature option to features page Corrected pin 13 from VSS1AGND in Figure 2-1 Added a row to Table 3-9 for PARTID and changed DEVICEID to REVID Added 6.4 through 6.6, current consumption tables Added Section 6.6.1 on reducing current consumption Added section 6.7 through section 6.11


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
TMX320F2808GGMA 32-Bit Digital Signal Controller with FlashHigh-Performance Static CMOS Technology 100 MHz (10-ns Cycle Time) Low-Power (1.8-V Core, 3.3-V I/O) Design 3.3-V Flash VoltageJTAG Boundary Scan Support
TAS5152 Stereo 125W PowerstageThe TAS5152 is a third-generation, high-performance, integrated stereo digital amplifier power stage with improved protection system. The TAS5152 is capable of driving a 4- bridge-tied
TAS5142 Stereo 100W PowerstageThe TAS5142 is a third-generation, high-performance, integrated stereo digital amplifier power stage with improved protection system. The TAS5142 is capable of driving a 4- bridge-tied
TLC5940 4096 Step Grayscale LED Driver w/Dot-CorrectionThe TLC5940 is a 16-channel constant-current sink LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step
TLC5923 LED DriverThe TLC5923 is a 16 channel constant-current sink driver. Each channel has a On/Off state and a 128-step adjustable constant current sink (dot correction). The dot correction adjusts the brightness
TS3L301 16-Bit to 8-Bit SPDT Gigabit LAN Switch with Low and Flat On-State ResistanceThe TS3L301 is a 16-bit to 8-bit multiplexer/demultiplexer LAN switch with a single select (SEL) input. The SEL input controls
BQ25010 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output Adjustable The bqHYBRID series are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bqHYBRID
BQ25011 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output 3.3V The bqHYBRID series are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bqHYBRID
BQ25012 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output 1.8VLi-Ion Or Li-Pol Charge Management and Synchronous DC-DC Power Conversion In a Single ChipOptimized for Powering Bluetooth Headsets and AccessoriesCharges
ADS1602 16-Bit, 2.5MSPS Analog-to-Digital ConverterThe ADS1602 is a high-speed, high-precision, delta-sigma analog-to-digital converter (ADC) manufactured on an advanced CMOS process. The ADS1602 oversampling
INA193 Voltage Output High-Side Measurement Current Shunt MonitorThe INA193—INA198 family of current shunt monitors with voltage output can sense drops across shunts at common-mode voltages from –16V to +80V,
TPS65160 Bias Power Supply for TV and Monitor TFT LCD PanelsThe TPS65160 offers a compact power supply solution to provide all four voltages required by thin film transistor (TFT) LCD panel. With its high current
MSP430F4270 16-Bit Ultra-Low-Power MCU, 32kB Flash, 256B RAM, 16-bit sigma Delta A/D, 12-bit D/A, LCD DriverThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
TMS320C6727 Floating-Point Digital Signal ProcessorThe TMS320C672x is the next generation of Texas Instruments’ C67x™ family of high-performance 32-/64-bit floating-point digital signal processors. The TMS320C672x
TRF1222 3.5-GHz Integrated Up-ConverterThe TRF1222 up-converts a UHF IF signal to an RF signal in the 3300-MHz to 3800-MHz range for 3.5-GHz radio applications. The TRF1222 has 18 dB of gain and an output
TRF1221 Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs
TRF1216 3.5-GHz High Dynamic Range Low Noise Down-Converter The TRF1216 is the first of two integrated circuits used in the receiver section of Texas Instruments’ 3.5-GHz radio chipset. The TRF1216 down-converts
TRF1212 Dual VCO/PLL Synthesizer With DownconverterThe TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range.
TRF1123 2.1-GHz to 2.7-GHz 1-W Power Amplifer The TRF1123 is a highly integrated linear transmitter power amplifier MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit

CD4071BM96 : ti CD4071B, CMOS Quad 2-Input OR GATE

LM211QDR : ti LM211, Single, Strobed Differential Comparator With Open Collector And Emitter Outputs

SN5423J : ti SN5423, Dual 4-Input NOR GATEs With Strobe

SN54S195FK : 4-bit Parallel-access Shift Registers

SN74HC4852DGVR : Dual 4-to-1 Channel Analog Multiplexer/demultiplexer With Injection Current Effect Control

TLV431ACDBVT : ti TLV431A, Low Voltage Adjustable Precision Shunt Regulator

SN74LVCH16245AZRDR : 32-bit BUS Transceiver WITH 3-state Outputs

TPS51103DRCR : Pmic - Voltage Regulator - Special Purpose Integrated Circuit (ics) Cut Tape (CT); IC LDO W/SWITCHOVER CIRC 10-SON Specifications: Package / Case: 10-VFDFN Exposed Pad ; Packaging: Cut Tape (CT) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

74GTLPH16927VRG4 : Logic - Translator Integrated Circuit (ics) LVTTL Tape & Reel (TR); IC LVTTL/GTLP BUS TXRX 56TVSOP Specifications: Package / Case: 56-TFSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Input Type: LVTTL ; Output Type: GTLP ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CD74HC27ME4 : HC/UH SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO20 Specifications: Flip-Flop Type: D ; Triggering: Positive-edge Triggered ; Supply Voltage: 4.5 ; Output Characteristics: TRUE ; Propagation Delay: 225 ns ; fMAX: 23 MHz ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: GREEN, PLASTIC, SOIC-20, SOIC ; Logic Family: CMOS ; Number of

BQ24078EVM-015 : EVAL BOARD FOR BQ24078 Texas Instruments' bq2407x is a family of integrated Li-Ion battery linear chargers with system power path management functionality targeted at space-constrained portable applications. The devices operate from either a USB port or an AC adapter and support charge currents up to 1.5 A. The input v

0-C     D-L     M-R     S-Z