Details, datasheet, quote on part number: TS3L100DBQR
PartTS3L100DBQR
CategorySemiconductors => Switches and Multiplexers => HDMI/LAN/VGA/DDR/Video Switch
Part familyTS3L100 Quad SPDT Wide Bandwidth LAN Switch with Low On-State Resistance
DescriptionQuad SPDT Wide Bandwidth LAN Switch with Low On-State Resistance 16-SSOP 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSCompliant
SampleYes
DatasheetDownload TS3L100DBQR datasheet
Cross ref.Similar parts: PI3L100QE
Quote
Find where to buy
 
PackagesSSOP (DBQ) | 16
Specifications 
Operating Temperature Range(C)0 to 70
Bandwidth(MHz)350
VIL(Max)(V)0.8
Turn on Time (Enable)(Max)(ns)7.5
Turn off Time (Disable)(Max)(ns)3.5
Package GroupSOIC,SSOP,TSSOP,TVSOP,VQFN
Ron Channel Match(Max)(Ω)1
VCC(Min)(V)3
Off Isolation(Typ)(dB)-42
Ron(Max)(Ohms)15
Input/Output Continuous Current(Max)(mA)128
Input/Ouput Voltage(Min)(V)0
OFF-state leakage current(Max)(µA)1
Number of Channels(#)4
Input/Output OFF-state Capacitance(Typ)(pF)10
Bandwidth(Max)(MHz)350
ICC(Typ)(uA)0.1
Ron(Typ)(Ohms)10
Crosstalk(dB)-68
Input/Ouput Voltage(Max)(V)3.6
ESD Charged Device Model(kV)1
Input/Output ON-state Capacitance(Typ)(pF)3
Approx. Price (US$)0.65 | 1ku
Additional FeaturesIoff Protection,10 BASE-T,100 Base-T
ESD HBM(Typ)(kV)2
VIH(Min)(V)2
VCC(Max)(V)3.6
ICC(Max)(uA)10
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
16DBQSSOPR-PDSO-G2500LARGE T&RTK100 3.94.91.5.64
Application notes
• Preventing Excess Power Consumption on Analog Switches
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For | Doc

 

Features, Applications
TS3L100 QUAD SPDT WIDEBANDWIDTH LAN SWITCH WITH LOW ONSTATE RESISTANCE

D Wide Bandwidth (BW = 350 MHz Min) D Low Differential Crosstalk D Low Power Consumption (ICC 3 mA Max) D Bidirectional Data Flow, With Near-Zero

Propagation Delay Low ON-State Resistance (ron 5 W Typ) Rail-to-Rail Switching on Data I/O Ports (0 to VCC) VCC Operating Range From 3.6 V Ioff Supports Partial-Power-Down Mode Operation

Clamp Diodes Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) Suitable for Both 10 Base-T/100 Base-T Signaling

The TI TS3L100 LAN switch 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. When E is low, the switch is enabled and the I port is connected to the Y port. When E is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. ORDERING INFORMATION

TA QFN - RGY SOIC to 70C SSOP (QSOP) - DBQ TSSOP - PW PACKAGE Tape and reel Tube Tape and reel Tape and reel Tube Tape and reel ORDERABLE PART NUMBER TS3L100 TK100 TOP-SIDE MARKING TK100

TVSOP - DGV Tape and reel TS3L100DGVR TK100 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

FUNCTION TABLE INPUTS INPUT/OUTPUT IX1 Z PIN DESCRIPTIONS PIN NAME IAn-IDn S E YA-YD DESCRIPTION Data I/Os Select input Enable input Data I/Os FUNCTION = IX1 Disconnect


 

Related products with the same datasheet
TS3L100D
TS3L100DGVR
TS3L100DR
TS3L100PW
TS3L100PWR
TS3L100RGYR
TS3L100DBQRG4
TS3L100DGVRG4
TS3L100RGYRG4
Some Part number from the same manufacture Texas Instruments, Inc.
TS3L100DGVR Quad SPDT Wide Bandwidth Lan Switch With Low On-state Resistance<<<>>>the ti TS3L100 Lan Switch is a 4-bit 1-of-2 Multiplexer/demultiplexer With a Single Switch-enable (E) Input. When e is Low, The Switch
TS3V330 Quad SPDT Wide Bandwidth Video Switch With Low On-state Resistance<<<>>>the ti TS3V330 Video Switch is a 4-bit 1-of-2 Multiplexer/demultiplexer With a Single Switch-enable (EN) Input. When en is Low, The Switch
TS5A23157 10-Ohm SPDT Analog Switch
TS5A23157 10-Ohm SPDT Analog Switch<<<>>>the TS5A23157 is a Dual, Single-pole, Double-throw (SPDT) Analog Switch Designed to Operate From 1.65 V to 5.5 V. This Device CAN Handle Both Digital And Analog Signals.
TS5A23157DGSR 10-Ohm SPDT Analog Switch
TS5A23157DGSR 10-Ohm SPDT Analog Switch<<<>>>the TS5A23157 is a Dual, Single-pole, Double-throw (SPDT) Analog Switch Designed to Operate From 1.65 V to 5.5 V. This Device CAN Handle Both Digital And Analog Signals.
TS5A23157DGST 10-Ohm SPDT Analog Switch
TS5A23157DGST 10-Ohm SPDT Analog Switch<<<>>>the TS5A23157 is a Dual, Single-pole, Double-throw (SPDT) Analog Switch Designed to Operate From 1.65 V to 5.5 V. This Device CAN Handle Both Digital And Analog Signals.
TS5L100 Quad SPDT Wide Bandwidth Lan Switch With Low On-state Resistance<<<>>>the ti TS5L100 Lan Switch is a 4-bit 1-of-2 Multiplexer/demultiplexer With a Single Switch-enable (E) Input. When e is Low, The Switch
TS5V330 Quad SPDT Wide Bandwidth Video Switch With Low On-state Resistance<<<>>>the ti TS5V330 Video Switch is a 4-bit 1-of-2 Multiplexer/demultiplexer With a Single Switch-enable (EN) Input. When en is Low, The Switch
TSB11C01 Ieee 1394-1995 Triple-cable Transceiver/arbiter
TSB11C01DL ti TSB11C01, Ieee 1394-1995, 5V, 3-Port, 100Mbps Physical Layer Controller
TSB11LV01 3v 1-port Ieee 1394-1995 Cable Transceiver/arbiter
TSB11LV01PT ti TSB11LV01, Ieee 1394-1995, 3.3V, 1-Port, 100Mbps Physical Layer Controller
TSB12C01A 1394 Serial Bus
TSB12C01AIPZ ti TSB12C01A, High Performance 5V Link Layer With 32-bit Host I/F, 2K Fifos
TSB12C01AWN High-speed Serial-bus Link-layer Controller
TSB12LV01A
TSB12LV01AIPZ ti TSB12LV01A, High Performance 3.3V Link Layer With 32-bit Host I/F, 2K Fifos
TSB12LV01B
TSB12LV01BIPZT ti TSB12LV01B, High Performance 1394 3.3V Link Layer For Telecom, Embedded & Industrial App.,32-Bit I/F, 2kb Fifo
 
0-C     D-L     M-R     S-Z