Details, datasheet, quote on part number: TS3L301DGGR
PartTS3L301DGGR
CategorySemiconductors => Switches and Multiplexers => HDMI/LAN/VGA/DDR/Video Switch
Part familyTS3L301 16-Bit to 8-Bit SPDT Gigabit LAN Switch with Low and Flat On-State Resistance
Description16-Bit to 8-Bit SPDT Gigabit LAN Switch with Low and Flat On-State Resistance 48-TSSOP -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSCompliant
SampleYes
DatasheetDownload TS3L301DGGR datasheet
Quote
Find where to buy
 
PackagesTSSOP (DGG) | 48
Specifications 
Bandwidth(MHz)900
VIL(Max)(V)0.8
Operating Temperature Range(C)-40 to 85
Input/Output ON-state Capacitance(Typ)(pF)3.5
Crosstalk(dB)-90
Approx. Price (US$)1.41 | 1ku
VCC(Min)(V)3
Ron(Typ)(Ohms)4
Input/Output Continuous Current(Max)(mA)128
Input/Ouput Voltage(Min)(V)0
ICC(Max)(uA)600
ICC(Typ)(uA)250
OFF-state leakage current(Max)(µA)1
Input/Output OFF-state Capacitance(Typ)(pF)10
Bandwidth(Max)(MHz)900
Package GroupTSSOP,TVSOP
Propagation Delay(ns)0.25
Ron(Max)(Ohms)8
Number of Channels(#)8
ESD Charged Device Model(kV)1
Input/Ouput Voltage(Max)(V)5
RON Flatness(Typ)(Ohms)0.7
Additional FeaturesIoff Protection,10 BASE-T,100 BASE-T,1000 BASE-T,LVDS
Ron Channel Match(Max)(Ω)1.2
VIH(Min)(V)2
VCC(Max)(V)3.6
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
48DGGTSSOPR-PDSO-G2000LARGE T&RTS3L301 6.112.51.15.5
Application notes
• Preventing Excess Power Consumption on Analog Switches
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For | Doc
Spice Model
HSPICE Model for TS3L301 - ZIP (05/25/2005)

 

Features, Applications
TO 8BIT SPDT GIGABIT LAN SWITCH WITH LOW AND FLAT ONSTATE RESISTANCE

Wide Bandwidth (BW = 900 MHz Typ) Low Crosstalk (XTALK -41 dB Typ) Low Bit-to-Bit Skew [tsk(o) 0.2 ns Max] Low and Flat ON-State Resistance (ron 4 W Typ, ron(flat) 0.7 W Typ) Low Input/Output Capacitance (CON 10 pF Typ) Rail-to-Rail Switching on Data I/O Ports 5 V) VDD Operating Range From 3.6 V Ioff Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) Suitable for 10/100/1000 Mbit Ethernet Signaling Applications - 10/100/1000 Base-T Signal Switching - Differential (LVDS, LVPECL) Signal Switching - Digital Video Signal Routing - Notebook Docking Signal Routing - Hub and Router Signal Switching

The to 8-bit multiplexer/demultiplexer LAN switch with a single select (SEL) input. The SEL input controls the data path of the multiplexer/demultiplexer. The device provides a low and flat on-state resistance (ron) and an excellent on resistance match. Low input/output capacitance, high-bandwidth, low skew, and low crosstalk among channels make this device suitable for various LAN applications such as 10/100/1000 Base-T. ORDERING INFORMATION

to 85C PACKAGE TSSOP - DGG TVSOP - DGV Tape and reel Tape and reel ORDERABLE PART NUMBER TS3L301DGGR TS3L301DGVR TOP-SIDE MARKING TS3L301 TK301

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

TO 8BIT SPDT GIGABIT LAN SWITCH WITH LOW AND FLAT ONSTATE RESISTANCE

FUNCTION TABLE INPUT SEL L H INPUT/OUTPUT nB1 nB2 PIN DESCRIPTIONS PIN NAME An nBm SEL DESCRIPTION Data I/Os Data I/Os Select input FUNCTION = nB2

TO 8BIT SPDT GIGABIT LAN SWITCH WITH LOW AND FLAT ONSTATE RESISTANCE
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VDD. 4.6 V Control input voltage range, VIN (see Notes 1 and 7 V Switch I/O voltage range, VI/O (see Notes 1, 2, and 7 V Control input clamp current, IIK (VIN -50 mA I/O port clamp current, II/OK (VI/O -50 mA ON-state switch current, II/O (see Note 128 mA Continuous current through VDD or GND terminals. 100 mA Package thermal impedance, JA (see Note 5): DGG package. 70C/W DGV package. 58C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to ground, unless otherwise specified. 2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. VI and VO are used to denote specific conditions for VI/O. 4. II and IO are used to denote specific conditions for II/O. 5. The package thermal impedance is calculated in accordance with JESD 51-7.

MIN VDD VIH VIL VI/O Supply voltage High-level control input voltage (SEL) Low-level control input voltage (SEL) Input/output voltage MAX UNIT

TA Operating free-air temperature 85 C NOTE 6: All unused control inputs of the device must be held at VDD or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.


 

Related products with the same datasheet
TS3L301DGVR
TS3L301DGG
TS3L301DGGRE4
TS3L301DGGRG4
TS3L301DGVRE4
TS3L301DGVRG4
Some Part number from the same manufacture Texas Instruments, Inc.
TS3L301DGVR 16-Bit to 8-Bit SPDT Gigabit LAN Switch with Low and Flat On-State ResistanceThe TS3L301 is a 16-bit to 8-bit multiplexer/demultiplexer LAN switch with a single select (SEL) input. The SEL input controls
BQ25010 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output Adjustable The bqHYBRID series are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bqHYBRID
BQ25011 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output 3.3V The bqHYBRID series are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bqHYBRID
BQ25012 Single-Chip Li-Ion Charger and DC/DC Converter IC, Output 1.8VLi-Ion Or Li-Pol Charge Management and Synchronous DC-DC Power Conversion In a Single ChipOptimized for Powering Bluetooth Headsets and AccessoriesCharges
ADS1602 16-Bit, 2.5MSPS Analog-to-Digital ConverterThe ADS1602 is a high-speed, high-precision, delta-sigma analog-to-digital converter (ADC) manufactured on an advanced CMOS process. The ADS1602 oversampling
INA193 Voltage Output High-Side Measurement Current Shunt MonitorThe INA193INA198 family of current shunt monitors with voltage output can sense drops across shunts at common-mode voltages from 16V to +80V,
TPS65160 Bias Power Supply for TV and Monitor TFT LCD PanelsThe TPS65160 offers a compact power supply solution to provide all four voltages required by thin film transistor (TFT) LCD panel. With its high current
MSP430F4270 16-Bit Ultra-Low-Power MCU, 32kB Flash, 256B RAM, 16-bit sigma Delta A/D, 12-bit D/A, LCD DriverThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
TMS320C6727 Floating-Point Digital Signal ProcessorThe TMS320C672x is the next generation of Texas Instruments C67x family of high-performance 32-/64-bit floating-point digital signal processors. The TMS320C672x
TMS320C6726
TMS320C6722
TRF1222 3.5-GHz Integrated Up-ConverterThe TRF1222 up-converts a UHF IF signal to an RF signal in the 3300-MHz to 3800-MHz range for 3.5-GHz radio applications. The TRF1222 has 18 dB of gain and an output
TRF1221 Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs
TRF1216 3.5-GHz High Dynamic Range Low Noise Down-Converter The TRF1216 is the first of two integrated circuits used in the receiver section of Texas Instruments 3.5-GHz radio chipset. The TRF1216 down-converts
TRF1212 Dual VCO/PLL Synthesizer With DownconverterThe TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range.
TRF1123 2.1-GHz to 2.7-GHz 1-W Power Amplifer The TRF1123 is a highly integrated linear transmitter power amplifier MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit
TRF1122 2.5-GHz Integrated Up-Converter The TRF1122 up-converts a UHF IF signal to an RF signal in the 2100-MHz to 2700-MHz range for 2.5-GHz radio applications. The TRF1122 has 18 dB of gain and an output P-1 dB of +14 dBm,
TRF1121 Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs
TRF1115 2.5-GHz High Dynamic Range Low-Noise Down-Converter The TRF1115 is the first of two ASICs used in the receiver section of Texas Instruments MMDS/MDS/WCS/802.16x chipset. The TRF1115 down-converts the input
TRF1112 Dual VCO/PLL Synthesizer With Downconverter The TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range.
TRF2432 Dual-Band IQ/IF Transceiver with Dual VCO Synthersizers The TRF2432 is a fully integrated IQ transceiver specifically for use in 802.11 applications. The TRF2432 is designed to perform the IQ conversion
 
0-C     D-L     M-R     S-Z