|Category||Timing Circuits => Oscillators => TCXO (Temperature Controlled Oscillators)|
Vectron International has introduced a series of low-profile,
low cost, surface mount, Temperature Compensated
Crystal Oscillators (TCXOs) available in frequencies
from 10 MHz to 50 MHz.
|Datasheet||Download OSC datasheet
Low Cost or 5.0 Vdc Option Reflow Solderable <2.2 mm Height Voltage Tune Option
Wireless handsets, PCS, GSM, Cellular PCMCIA Applications GPS
Vectron International has introduced a series of low-profile, low cost, surface mount, Temperature Compensated Crystal Oscillators (TCXOs) available in frequencies from 10 MHz to 50 MHz. The OSC series low-profile (0.09 inch maximum height), surface mount TCXOs can be mounted using the standard convection reflow process. The units feature a PPM frequency vs. temperature characteristic over a to operating range and operate from or 5V supply. Current drain <2.0 mA. Aging <1ppm/year and phase noise is -125 dBc/Hz 100 Hz and -150 dbc/Hz at 100 kHz. The OSC series of TCXOs and TCVCXOs has been designed for pick-and-place mounting and reflow soldering. Units are available on tape-and-reel at no additional charge. The reel size is 2000 pcs. and is compatible with EIAJ-1009B standards. The low-cost, miniature units are ideal for wireless handsets, PCMCIA applications, and GPS receivers.
Stability vs. Supply Aging (typical): Input Voltage: Current: Output: Clipped Sinewave Load: Mechanical trim: Trim options: +5.0 Vdc
0 = Mechanical trim, no VCO 1= ppm VC & mechanical 2 = Voltage trim only ppm min. 100K +5.0 Vdc to +4.5Vdc ppm at +2.5 Vdc <10 mS (typical) to within > 3 dBc down > 6 dBc down > 10 dBc down -80 dBc/Hz max. 10 Hz offset -125 dBc/Hz max. 100 Hz offset -145 dBc/Hz max. at 1 KHz offset -148 dBc/Hz max. at 10 KHz offset -150 dBc/Hz max. at 100 KHz offset minimum +3.0 Vdc to +2.5Vdc ppm at +1.5 Vdc PPM
Voltage Control Input Impedence: Supply Voltage: Control Voltage Range: Frequency Tolerance at Start-up time: Harmonics: 2nd harmonic 3rd harmonic Other Phase Noise (typical): at 10 MHz
The OSC series of TCXO s and VCTCXO s has been designed for pick and place and reflow soldering. Units are available on Tape and Reel at no additional charge when ordering a complete reel. The reel size is 2000 pcs and is compatible with EIAJ-1009B standards. The suggested reflow profile is shown below. The TCXO may be reflowed two times. Frequency shift as a result of reflow will be <1.0PPM. Units should not be adjusted to center frequencies until at least 2 hours after reflow to allow the crystals to stabilize. The OSC footprint is compatible with many of the previous generation 6 pin leaded TCXO s. Our OSE model is the same size as the OSC except it provides the two additional pads to match pad connections of 6 pin leaded TCXO s and VCTCXO s.
TCXO s are precision subsystems with tolerances measured to Non-hermetically sealed TCXO s should not be subjected to a wash process that will immerse the TCXO in solvents. No clean is the recommended procedure.
|Related products with the same datasheet|
|Some Part number from the same manufacture Vectron International|
|OSC Series OSC SeriesVectron International has introduced a series of low-profile,low cost, surface mount, Temperature CompensatedCrystal Oscillators (TCXOs) available in frequenciesfrom 10 MHz to 50 MHz.|
|C2310 Temperature Compensated Crystal Oscillators - TCXOVectron’s VTC4 Temperature CompensatedCrystal Oscillator (TCXO) is a quartz stabilized,clipped sine wave output, temperaturecompensated oscillator,|
|C4400 OCXORoHS and Lead FreeAssembly CompliantSmall size OCXOExcellent stabilitiesclose to S3ESMD optional|
|C4505 OCXORoHS and Lead FreeAssembly CompliantSmall size SMD FR4 OCXOClose to S3E stability|
|C4530 OCXORoHS and Lead FreeAssembly CompliantSMD FR4 OCXOExcellent stability versuscost performance|
|C4550 OCXORoHS and Lead FreeAssembly Compliant1" x 1" OCXOLow profile packageExcellent stability versuscost performanceSMD optional|
|C4600 OCXORoHS and Lead FreeAssembly CompliantStandard Eurocase OCXOwith very low aging rates|
|C4700 OCXORoHS and Lead FreeAssembly CompliantUltra-High StabilityDOCXO in 2" x 2" package|
|C4710 OCXOLow Phase Noise OCXOHigh stability in2" x 2" package|
|EX-380/385 4 Pin DIP & SMD Evacuated Miniature Crystal OscillatorThe model EX-380 Series is a low profile DIP or SMD, EvacuatedMiniature Oven Controlled Crystal Oscillator (EMXO),available in frequencies from|
|CD-700 Complete VCXO Based Phase Lock LoopThe VI CD-700 is a user-configurable crystalbased PLL integrated circuit. It includes a digitalphase detector, op-amp, VCXO and additionalintegrated functions|
|VS-751 Voltage Controlled SAW Oscillators - VCSO'sThe VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-Q|
|VS-700 VS-700 Voltage Controlled Saw OscillatorThe VS-700 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter. The SAW filter is a high-Q quartz|
M55310/25-S36B : 25MHz - 175MHz Crystal Oscillator
M55310/26-S42C : 25MHz - 65MHz Crystal Oscillator
VDUGLD : Frequency Range = 1.024MHz - 77.760MHz ;; Output = TTL / CMOS ;; Package (mm) = 5.0 X 7.5 X 2.1 ;; Features = Tristate
MQF10.7-0750-07 : Monolithic Crystal Filter
VTC3-H24E-1M00 : Voltage Controlled Temperature Compensated Crystal Oscillator
VS-751-LFF-GNN624.6938 : Dual Frequency VCSO
VC-800-KAF-NTK-44.736 : Voltage Controlled Crystal Oscillator
VVC1-B3D-51.840 : Voltage Controlled Crystal Oscillator
TRU050-GALHB-1M0000000 : Complete VCXO Based Phase-locked Loop
ABM4AABM4B : Crystal Oscillators. 7.0 X 5.0 X 1.6 MM Ceramic Glass Sealed 10MHz to 100MHz.
CIM : Crystal Oscillators. Technology = TH ;; Package = ;; Frequency = 51.840 - 155.520 MHZ.
CX72300 : Frequency Synthesizers. 2.1 GHZ Dual Fractional-n Frequency Synthesizer.
CY2280 : 100-MHz Pentium ii Clock Synthesizer/driver With Spread Spectrum For Mobile or Desktop PCS.
CY28372OC : Frequency Timing Generators For PC And Server Motherboards. Supports AMD Athlon/Duron CPU 3.3V and 2.5V power supply Eight copies of PCI clocks One 48-MHz USB clock Two copies of ZCLK clocks One 48-MHz/24-MHz programmable SIO clock One differential CPU clock (opendrain) One singled-ended CPU clock (opendrain) SMBus support with readback capabilities Spread Spectrum electromagnetic interference (EMI) reduction.
FMXW : Crystal Oscillators. Thru-hole Watch Crystals Cylindrical. Standard Freq. 32.768 kHz Two Cylindrical Packages Parabolic Temperature Curve Low Cost S Parameter Frequency Tolerance Frequency Stability Over Temp. Turn Over Temperature Operating Temperature Storage Temperature Load Capacitance (CL) Equivalent Series Resistance (ESR) Shunt Capacitance (C0) Drive Level Aging @ 25°C s 32.768 kHz ±20 ppm @ 25°C Std.
ICS9120-56 : Application Specific PLL. Frequency Timing Generator For Ethernet & Hard Drives.
ICS9248-199 : Motherboards. Frequencygenerator And Integrated Buffers For K7. Recommended Application: Main system clock for SIS 735/740 with AMD K7 chipset. Output : 1 - CPU 1 - Differential pair open drain CPU clock 1 - IOAPIC 1 - SDRAM 3.3V 6- PCI 2 - AGP 48MHz, @3.3V fixed 24/48MHz, @3.3V selectable by I2C (Default 24MHz) 2- REF @3.3V, 14.318MHz : Programmable output frequency. Programmable output divider ratios. Programmable.
MAS1175 : ic For 10.00 - 20.00 MHZ Vctcxo. Low Power Wide Supply Voltage Range True Sine Wave Output Very High Level of Integration Electrically Trimmable Very Low Phase Noise Low Cost The is an integrated circuit well suited to build VCTCXO for mobile communication. Only two external components are needed. Temperature calibration is achieved with three calibration points only. The trimming.
PI6C2501 : Clock Circuits. 25 to 80 Mhz, 1 Output Zero-delay Clock Driver. High-Performance, Phase-Locked-Loop Clock Distribution Allows Clock Input to have Spread Spectrum modulation for EMI reduction Zero Input-to-Output delay Low jitter: Cycle-to-Cycle jitter ±100ps max. On-chip series damping resistor at clock output drivers for low noise and EMI reduction Operates at 3.3V VCC Wide range of Clock Frequencies to 80 MHz Package:.
SF1080A : SAW Resonators. Frequency = 499.25 ;; = Filter, Catv Pilot Tone. Designed for CATV Applications (Pilot Tone) Tightly Controlled Insertion Loss 7.1 mm Surface-Mount Case Unbalanced Input and Output Sym fc Insertion Loss 0.5 dB Passband 3 dB Passband BW3 Amplitude Ripple over fc ±100 kHz Rejection to fc-3.0 and to fc+200 MHz Ultimate Operating Temperature Range TA Impedance Matching to 50 unbalanced Case Style Lid Symbolization.
SMV3300A : Package Style = Sub-l ;; Frequency (MHz) = 3200 to 3400 ;; N@10KHz (dBc/Hz) = -91 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 96 ;; Power (dBm) = 5.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 20.
SY89833L : 1:4 2GHz LVDS Clock Distribution/translator w/ Internal Termination. 3.3V, 2GHz ANY-DIFFERENTIAL Precision EdgeTM SY89833L INPUT-TO-LVDS 1:4 FANOUT BUFFER/ FINAL TRANSLATOR W/ INTERNAL TERMINATION I Accepts any differential input signal and provides four LVDS output copies I Guaranteed AC performance over temperature and voltage: > 2.0GHz fMAX < 20ps within-device skew < 190ps rise/fall times I Low jitter design.
TS556 : Low Power. Low Power Dual CMOS Timer. 220 µA typ at VCC 180 µA typ at VCC = 3V HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE556 WIDE VOLTAGE RANGE to +16V HIGH OUTPUT CURRENT CAPABILITY SUPPLY CURRENT SPIKES REDUCED DURING OUTPUT TRANSITIONS HIGH INPUT IMPEDANCE : 1012 OUTPUT COMPATIBLE WITH TTL,CMOS AND LOGIC MOS The is a dual CMOS timer which.
V940ME04 : Package Style = MINI-14S-L ;; Frequency (MHz) = 5220 to 5420 ;; N@10KHz (dBc/Hz) = -78 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 118 ;; Power (dBm) = 2.75 ± 1.75 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 26.
VCO190-1740U : High Performance Signal Source. Model: VCO190-1740U Rev: A Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 1715 MHz 1765 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.9-5.1 V Frequency.
W42C31-09 : Clock Circuits. Spread Spectrum Frequency Timing Generator. Maximized EMI suppression using Cypress's Spread Spectrum technology Generates a spread spectrum copy of the provided input Integrated loop filter components Operates with or 5V supply Low-power CMOS design Available in 8-pin SOIC (Small Outline Integrated Circuit) to pass increasingly difficult EMI testing without resorting to costly shielding or redesign.
FMOCLVDSC1S : LVDS Oscillators manufactures high quality Low Voltage Differential Signaling (LVDS) Oscillators. Our LVDS oscillator designs come in a wide range of packages to meet your application needs..
PI6C10806 : 1.8V/2.5V, 250MHz, Low Skew 1:6 Crystal to LVCMOS Clock Buffer. Six low skew outputs: < 80ps Crystal oscillator input: to 40MHz Switching frequency to 250 MHz Fast output rise/fall time: < 800ps Synchronous output enables Industrial Temperature range: +85°C 1.8V and 2.5V operation Packaging (Pb-free & Green available): 16-pin 173-mil wide TSSOP (L) Pericom Semiconductor's is a low skew six output crystal oscillator.