|Description||Solid Tantalum Capacitors, Solid Electrolyte Tantalex, Hermetic Seal, Axial Leaded|
|Datasheet||Download 150D824X9075B2 datasheet
These high performance, hermetically-sealed TANTALEX® capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades. High capacitance, low DCL, low dissipation factor and exceptional operating stability. Performance and reliability have been proven in commercial, industrial and military applications. Available in four case codes and capacitors and are supplied with plastic-film insulation. Terminals are solid, tinned nickel wire leads. The Military equivalent to the 150D is the CSR13 which is qualified to MIL-C-39003/01.
Operating Temperature: + 85°C. (To + 125°C with voltage derating.) Capacitance Tolerance: At 120 Hz, ± 10% standard. ± 5% available as special. + 85°C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables. At +125°C: Leakage shall not exceed 15 times the values listed in the Standard Ratings Tables. Life Test: Capacitors shall withstand rated DC voltage applied + 85°C for 2000 hours or derated DC voltage applied + 125°C for 1000 hours. Following the life test: 1. DCL shall not exceed 125% of the initial requirement. 2. Dissipation Factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 5%.
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor, as determined from the expression 2fRC, shall not exceed the values listed in the Standard Ratings Tables. DC Leakage Current (DCL Max.): + 25°C: Leakage current shall not exceed the values listed in he Standard Ratings Tables.
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. www.vishay.com 10 For technical questions, contact email@example.com Document Number: 40015 Revision 11-Jun-03
150D MODEL 224 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE ± 5% *Special order 006 DC VOLTAGE RATING + 85°C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A CASE CODE See Ratings and Case Codes Table. 2 STYLE NUMBER 2 =Insulated sleeve. T PACKAGING
*Insert capacitance tolerance code "X5"; for ± 5% units (special order). www.vishay.com 12 For technical questions, contact firstname.lastname@example.org Document Number: 40015 Revision 11-Jun-03
|Related products with the same datasheet|
|Some Part number from the same manufacture Vishay Intertechnology|
|150D824X9100B2 Solid Tantalum Capacitors, Solid Electrolyte Tantalex, Hermetic Seal, Axial Leaded|
|152D Solid Tantalum Capacitors, Solid Electrolyte Tantalex, Extended Range, Hermetic Seal, Axial Leaded|
D181K20Y5PF6.L2R : Ceramic Disc Capacitors Class 1 and 2, 50 V (DC) General Purpose
SIP12502DMP-33-E3 : Pmic - Voltage Regulator - Special Purpose Integrated Circuit (ics) Tape & Reel (TR); IC BOOST REG 3.3V PPAK MLP33-6 Specifications: Package / Case: PowerPAK® MLP33-6 ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
MCU08050D4531BP500 : 4.53K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 4.53K OHM 1/8W .1% SMD 0805 Specifications: Resistance (Ohms): 4.53K ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
CRCW040247R0FKED : 47 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 47 OHM .125W 5% 0402 SMD Specifications: Resistance (Ohms): 47 ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
BZX84-B16212 : 10 V, 0.3 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, TO-236AB Specifications: Diode Type: VOLTAGE REGULATOR DIODE ; RoHS Compliant: RoHS
BZX84C33TS-7-F : 3 V, 0.3 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE Specifications: Diode Type: VOLTAGE REGULATOR DIODE ; RoHS Compliant: RoHS
HDX612R00A : RES,RADIAL,METAL FOIL,612 OHMS,300WV,.05% +/-TOL,-5,5PPM TC,4217 CASE Specifications: Category / Application: General Use
PBX1R7400F : RES,RADIAL,METAL FOIL,1.74 OHMS,750WV,1% +/-TOL,-5,5PPM TC Specifications: Category / Application: General Use
PSBWR3520D : RES,CHASSIS MOUNT,METAL FOIL,352M OHMS,.5% +/-TOL,-15,15PPM TC Specifications: Category / Application: General Use