Details, datasheet, quote on part number: MKT1813-422-014-R
PartMKT1813-422-014-R
Category
DescriptionC-values 470 PF - 22 F, Voltage 63 - 1000 Vdc, Low Profile, Axial
CompanyVishay Intertechnology
DatasheetDownload MKT1813-422-014-R datasheet
  

 

Features, Applications

Metallized Polyester Film Capacitor Quality Assessment: IEC 60384-2, CECC 30 401-064

Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications.

Plastic-wrapped, epoxy resin sealed. Also available as flame retardant version.

Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For > 0.33F and > 100 VDC 10,000 s minimum value (20,000 s typical value) For > 0.33F and UR 100 VDC 5000 s minimum value (15,000 s typical value)

Extended metallized film (refer to general information)
Two bends through 90C with half of the force used in pull test

Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C 0.33F and > 100 VDC 30,000 M minimum value (60,000 M typical value) For C 0.33F and UR 100 VDC 15,000 M minimum value (50,000 M typical value)

Operational life 300,000 h Failure rate < 2 FIT (40C and 0.5 x UR) For further details, please refer to the general information provided in this catalog.

If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number 26013 Revision 10-Jun-02 For technical questions, contact dc-film@vishay.com www.vishay.com 31

Vishay Roederstein Metallized Polyester, Quality Assess.: IEC 30 401-064

Further C-values upon request. PCM + 3.5 *Not suitable for mains applications. Please refer to X-capacitors in our catalog "RFI Suppression Capacitors". **For the smaller size please add M at the end of the type designation (e.g. MKT 1813-510/255-M). Not CECC approved.

VOLTAGE CODE 63* 630 VDC/ 220 VAC D L VOLTAGE CODE 10* 1000 VDC/ 220 VAC D L

Further C-values upon request. PCM + 3.5 *Not suitable for mains applications. Please refer to X-capacitors in our catalog "RFI Suppression Capacitors". **For the smaller size please add M at the end of the type designation (e.g. MKT 1813-510/255-M). Not CECC approved.

LETTER CODE G R TYPE OF PACKAGING AMMO REEL BULK for > 31.5mm REEL DIAMETER (mm) 350 ORDERING CODE EXAMPLE MKT 1813-422-014-G MKT 1813-422-014-R MKT 1813-422-014 X


 

Related products with the same datasheet
MKT1813-422-014
MKT1813-422-014-G
Some Part number from the same manufacture Vishay Intertechnology
MKT1816 C-values 680 PF - 0.01 F, Voltage 8000 - 15000 Vdc, High Voltage Range, Low Profile, Axial
MKT1817 C-values 1000 PF - 1.0 F, Voltage 63 - 400 Vdc, PCM5
MKT1818 C-values 1000 PF - 4.7 F, Voltage 40 - 250 Vdc, PCM 7
MKT1820 C-values 1000 PF - 15 F, Voltage 63 - 1000 Vdc, Max. Temp. 125°C, PCM 10-27.5
MKT1822 C-values 1000 PF - 15 F, Voltage 63 - 1000 Vdc, PCM 10-27.5
MKT1824 C-values 0.01 F - 1.0 F, Voltage 40 - 63 Vdc, Max. Temp. 125°C, High Pulse Load, Stacked Film, SMD
MKT1826 C-values 1000 PF - 4.7 F, Voltage 40 - 250 Vdc, Max. Temp. 125°C, High Pulse Load, Stacked Film, PCM 5
MKT1826-E C-values 1000 PF-4.7 F, Voltage 40-250 Vdc, Max. Temp. 125°C, High Pulse Load, Stacked Film, Crimped to PCM 10
MKT370 Metallized, Boxed, 5mm Pitch
MKT371 Metallized, Boxed, 7,5mm Pitch
MKT372 Metallized, Boxed, 10mm Pitch
MKT373 Metallized, Boxed 15-27,5mm Pitch
MKT470 Metallized, Boxed, 5mm Pitch, 125°C
MMBD6050 Small Signal Switching Diode
MMBD7000 Dual Small Signal Switching Diode
MMBD914 Small-signal Switching Diode
MMBT2222A Small Signal Transistor (NPN)
MMBT2907A Small Signal Transistor (PNP)
MMBT3904 Small Signal Transistor (NPN)
MMBT3906 Small Signal Transistor (PNP)
MMBT4401 Small Signal Transistor (NPN)

6CWT04FN : High Performance Schottky Generation 5.0, 2 X 3 A High Performance Schottky Generation 5.0, 2 x 3 A

97PF120W : Standard Recovery Diodes Generation 2 DO-5 (stud Version), 95 A

MSP08A011K00J : Thick Film Resistor Networks Single-in-line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin a Profile and 6, 8 or 10 Pin c Profile

MCA12060D7682BP100 : 76.8K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 76.8K OHM 1/4W .1% SMD 1206 Specifications: Resistance (Ohms): 76.8K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CT9276X0063A0 : CAPACITOR, TANTALUM, SOLID, POLARIZED, 63 V, 27 uF, THROUGH HOLE MOUNT Specifications: Configuration / Form Factor: Leaded Capacitor ; Applications: General Purpose ; Electrolytic Capacitors: Tantalum ; Features: Polarized ; Capacitance Range: 27 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 63 volts ; Mounting Style: Through Hole ; Operating Temperature: -55 to 8

LCD-320H240C-WNH-V : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,RED Specifications: Display Type: Dot Matrix

P1005K4593DN : RESISTOR, THIN FILM, 0.25 W, 0.5 %, 100 ppm, 459000 ohm, SURFACE MOUNT, 1005 Specifications: Category / Application: General Use ; Technology / Construction: Thin Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 01005, CHIP, GREEN ; Resistance Range: 459000 ohms ; Tolerance: 0.5000 +/- % ; Temperature Coefficient: 100 ±ppm/°C ; Power Rating: 0.2500

1.5SMC9V1CAHE3TRTB : 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB Specifications: Configuration: Single ; Direction: Unidirectional ; Package: PLASTIC, SMC, 2 PIN ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 8.65 to 9.55 volts ; RoHS Compliant: RoHS

 
0-C     D-L     M-R     S-Z