Details, datasheet, quote on part number: ZL60106MJD
PartZL60106MJD
CategoryCommunication => Fiber Optics => Receivers => 12 Fiber Receivers Modules
Title12 Fiber Transmitters Modules
DescriptionDescription = 12 X 1.6 GBPS Parallel Fiber Optic Transmitter ;; Package Type = Elect & Opt ;; No. Of Pins = 100
CompanyZarlink Semiconductor
DatasheetDownload ZL60106MJD datasheet
Quote
Find where to buy
 
  

 

Features, Applications
x 1.6 Gbps Parallel Fiber Optic Link Transmitter and Receiver

Ordering Information ZL60105/MJD Parallel Fiber Transmitter ZL60106/MJD Parallel Fiber Receiver Heat sink and EMI shield options are available upon request ° C

Features

12 parallel channels, total 19.2 Gbps capacity Data rate to 1.6 Gbps per channel 850 nm VCSEL array Data I/O is CML compatible with DC blocking capacitors Link reach 1000 m Channel BER better than 10-12 Industry standard MPO/MTP ribbon fiber connector interface Pluggable MegArray® ball grid array connector Optionally available with EMI shield and external heat sink Laser class 1M IEC 60825-1:2001 compliant Power supply 3.3 V Compatible with industry MSA

Description

The ZL60105 and ZL60106 together make a very high speed transmitter/receiver pair for parallel fiber applications. The transmitter module converts parallel electrical input signals via a laser driver and a VCSEL array into parallel optical output signals at a wavelength of 850nm. The receiver module converts parallel optical input signals via a PIN photodiode array and a transimpedance and limiting amplifier into electrical output signals. The modules are pluggable each fitted with an industrystandard MegArray® BGA connector. This provides ease of assembly on the host board and enables provisioning of bandwidth on demand.

Applications

High-speed interconnects within and between switches, routers and transport equipment Proprietary backplanes Low cost SONET/SDH VSR (Very Short Reach) OC-192/STM64 connections InfiniBand® connections Interconnects rack-to-rack, shelf-to-shelf, boardto-board, board-to-optical backplane

Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2003, Zarlink Semiconductor Inc. All Rights Reserved.

Features. 1 Applications. 1 Description. 1 Absolute Maximum Ratings. 3 Recommended Operating Conditions. 3 Transmitter Specifications. 4 Transmitter Control and Status Signals. 6 Transmitter Control and Status Timing Diagrams. 7 Transmitter Pinout Assignments. 9 Transmitter Pin Description. 9 Receiver Specifications. 10 Receiver Control and Status Signals. 11 Receiver Control and Status Timing Diagrams. 12 Receiver Pinout Assignments. 13 Receiver Pin Description. 13 Thermal Characteristics. 14 Regulatory Compliance. 15 Eye safety. 15 Electrostatic discharge. 15 Electrostatic discharge immunity. 15 Electromagnetic interference. 15 Emission. 15 Immunity. 15 Handling instructions. 15 Cleaning the optical interface. 15 Connectors. 15 ESD handling. 15 Link Reach. 16 Link Model Parameters. 16 Electrical Interface - Application Examples. 17

Not necessarily applied together. Exceeding these values may cause permanent damage. Functional operation under these conditions is not implied. Parameter Supply voltage Differential input voltage amplitude1 Voltage on any pin Relative humidity (non-condensing) Storage temperature ESD resistance

1. Differential input voltage amplitude is defined V = DIN+ - DIN-.
Symbol VCC V VPIN MOS TSTG VESD Table 1 - Absolute Maximum Ratings

These parameters apply both to the transmitter and the receiver. Parameter Power supply voltage Operating case temperature Signaling rate (per Link distance2 Data I/O DC blocking Power supply capacitors3 channel)1 Symbol VCC TCASE fD LD CBLK VNPS Table 2 - Recommended Operating Conditions

1. Data patterns are to have maximum run lengths and DC balance shifts no worse than that of a Pseudo Random Bit Sequence of length 223-1 (PRBS-23). Information on lower bit rates is available on request. 2. For maximum distance, see Table 14. 3. For AC-coupling, DC blocking capacitors external to the module with a minimum value nF is recommended. 4. Power supply noise is defined at the supply side of the recommended filter for all VCC supplies over the frequency range to 1600 MHz with the recommended power supply filter in place.


 

Related products with the same datasheet
ZL60105MJD
ZL60106
Some Part number from the same manufacture Zarlink Semiconductor
ZL60301 Description = ;; Package Type = Elect & Opt ;; No. Of Pins = 100
ZL60401 622 Mbps, 1310 NM Uncooled Fabry-perot Laser Diode Module With Monitor
ZL60402 2.5 Gbps, 1310 NM Uncooled Fabry-perot Laser Diode Module With Monitor
ZL60404 1.25 Gbps, 1310 NM Uncooled Fabry-perot Laser Diode Module With Monitor
ZL70002 Description = Medical Surge Protection Device, 7-branch ;; Package Type = N/a ;; No. Of Pins =
ZN414Z
ZN415E
ZN416E
ZNPCM1
ZNPCM2
ZL50120 128 Channel CESoP Processor with dual Ethernet interfaceThe ZL50120 CESoP processor is a highly functional TDM to Packet bridging device providing both structured and unstructured circuit emulation services
ZL10313 Satellite Channel DemodulatorThe ZL10313 is a QPSK/BPSK 1 - 45 MSps demodulator and channel decoder for digital satellite television transmissions to the European Broadcast Union ETS 300 421 specification.
ZL40539 Dual Output CD and DVD 4 Channel Laser Diode DriverThe ZL40539 is a high performance laser diode driver capable of driving two separate cathode grounded laser diodes (e.g., 650 nm and 780 nm laser diodes).
ZL40518 3 Channel Laser Diode Driver The ZL40518 is a laser diode driver for high speed operation of a grounded laser diode. The driver consists of 3 controllable channels: a switchable, low noise, read channel
ZL30109 DS1/E1 System Synchronizer with 19.44 MHz Output The ZL30109 DS1/E1 System Synchronizer contains a digital phase-locked loop (DPLL), which provides timing and synchronization for multi-trunk DS1 and E1 transmission
ZL30100 T1/E1 System Synchronizer The ZL30100 T1/E1 System Synchronizer contains a digital phase-locked loop (DPLL), which provides timing and synchronization for multi-trunk T1 and E1 transmission equipment.
ZL30101 T1/E1 Stratum 3 System SynchronizerThe ZL30101 Stratum 3 System Synchronizer contains a digital phase-locked loop (DPLL), which provides timing and synchronization for multi-trunk T1 and E1 transmission
ZL50111 1024 Channel (32 T1/E1) Circuit Emulation Services over Packet ProcessorThe ZL50111 is a highly functional TDM to Packet bridging device that provides structured and unstructured circuit emulation services
ZL50120 128 Channel CESoP Processor with dual Ethernet interfaceThe ZL50120 CESoP processor is a highly functional TDM to Packet bridging device providing both structured and unstructured circuit emulation
ZL30108 SONET/SDH Network Interface DPLLThe ZL30108 SONET/SDH network interface digital phase-locked loop (DPLL) provides timing and synchronization for SONET/SDH network interface cards.Features Supports
ZL50115 32 Channel (1 T1/E1) CESoP Processor with single Ethernet interfaceThe ZL50115 CESoP processor is a highly functional TDM to Packet bridging device providing both structured and unstructured circuit
 
0-C     D-L     M-R     S-Z