Details, datasheet, quote on part number: NMA-2101
PartNMA-2101
CategoryRF & Microwaves => Noise Sources
DescriptionAmplified Noise Module, Noise Module Applications: Baseband/if Ber Testing, Jamming Receiver Calibration, A/D Dithering, Freq: 100 HZ to 1 GHZ
CompanyMicronetics Wireless
DatasheetDownload NMA-2101 datasheet
  

 

Features, Applications

DESCRIPTION

The NMA 2100 Noise Module is designed for testing wideband systems (CDMA, spread spectrum, FM, VHF, UHF) with wideband signals. Available in standard 24 Pin DIP packages for easy system integration, as well as SMA connectorized packages.

SPECIFICATIONS

s Operating Temperature: C s Storage Temperature: oC s Supply Voltage: +15 VDC s Temperature Stability:.025 dB/oC s Output Impedance: 50 ohm s Peak Factor: 5:1

APPLICATIONS

s Back-up source in redundant transmitters s Built-in self-test in communication receivers s Power distribution in cellular base stations s Component testing

1kHz-1GHz 1.0dB Available in SMA connectorized package, specify on quote/orders by adding "S" to Model No. + Low frequency limit of 100Hz requires a 47mf capacitor wired between pins 13 and 15. Low frequency limit 500 Hz without capacitor for 50 ohm models only.

MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 WEB: WWW.MICRONETICS.COM


 

Related products with the same datasheet
NMA-2102
NMA-2103
NMA-2104
NMA-2105
NMA-2106
NMA-2107
NMA-2108
NMA-2109
NMA-2110
NMA2100
Some Part number from the same manufacture Micronetics Wireless
NMA-2102 Amplified Noise Module, Noise Module Applications: Baseband/if Ber Testing, Jamming Receiver Calibration, A/D Dithering, Freq: 100 HZ to 1 GHZ
NMA-2410 Amplified Noise Module, Noise Module Applications Include Rf/if Ber Testing, Jamming, Built-in Frequency Response Test, Freq: 10 MHZ to 8.5 GHZ
NMA-5101
NMA-ISM Amplified Noise Module, Performs Interference Tests For 802.11a, 802.11b, And Ism Products in General
NMA2000 Amplified Noise Module, Noise Module Applications Include if Ber Testing, Broadband Receiver Calibration, A/D Dithering, Freq: 100 HZ to 2 GHZ
NMA2100 Amplified Noise Module, Noise Module Applications: Baseband/if Ber Testing, Jamming Receiver Calibration, A/D Dithering, Freq: 100 HZ to 1 GHZ
NMA2400 Amplified Noise Module, Noise Module Applications Include Rf/if Ber Testing, Jamming, Built-in Frequency Response Test, Freq: 10 MHZ to 8.5 GHZ
NMA5100
NS-346A Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
NSI1218W Waveguide Noise Sources Applications Include: Receiver, Radiometer Built-in Test And Calibration, Freq: 12.4 to 110 GHZ
NSL-2 Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
NZG-10-100K Amplified Noise Module, Baseband Modules Applications Include A/D Dithering, Encryption, Base-band, Ber Testing, Jamming, Freq: 100 HZ to 5 MHZ
RFN/25C Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
Same catergory

2SC5321 : Bipolar Transistors. Vceo (V) = 5 ;; Ic (mA) = 10 ;; PC (mW) = 100 ;; Cob (pF) = 0.4 ;; Cre (pF) = 0.3 ;; .fT(Typ.) (GHz) = 15 ;; Package = Usm ;; Application = VHF to UHF Amp.

AG403-86 : . 6000 MHz +18 dBm at 900 MHz +31.5 dBm at 900 MHz 20.5 dB Gain at 900 MHz Single Voltage Supply SOT-86 SMT Package Internally matched to 50 The is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 900 MHz, the AG403-86 typically provides dB of gain, +31.5 dBm Output IP3, and +18 dBm P1dB. The device.

HMC272MS8 : GAAS Mmic SMT Single Balanced Mixer 1.7 - 3 GHZ. Typical Applications The HMC272MS8 is ideal for: Up or Down Converter for PCS W-CDMA 2.4 GHz ISM MMDS The is an ultra miniature single balanced mixer an 8 lead plastic surface mount Mini Small Outline Package (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The RF port is balanced.

HWS332 : GAAS Mmic SPDT Terminated Switch. http://www.hw.com.tw Email: sales@hw.com.tw All s are subject to change without notice. .

KF477S : = 400MHz Band(50ohm) ;; Package = SC-45.

MRF21090 : Power. MRF21090, MRF21090S 2170 Mhz, 90 W, 28 V Lateral N-channel RF Power MOSFETs.

MSC81010 : General Purpose Microwave Transistors. MCS81010 General Purpose Amplifier Applications RF & Microwave Transistors.

PD54008 : Power. RF Power Transistors The Ldmost Plastic Family. EXCELLENT THERMAL STABILITY COMMON SOURCE CONFIGURATION POUT 8 W with 11.5 dB gain @ 500 MHz 7.5 V NEW RF PLASTIC PACKAGE The is a common source N-Channel, enhancement-mode lateral Field-Effect RF power transistor. It is designed for high gain, broad band commercial and industrial applications. It operates V in common source mode at frequencies to 1 GHz.

PH1090-15L : Bipolar Transistors.  Avionics Pulsed Bipolar Power Transistor. PH1090-15L AVIONICS PULSED POWER TRANSISTOR 15 WATTS, - 1090 MHz, 250s PULSE, 10% DUTY Designed for Pulsed Avionics Applications NPN Silicon Microwave Power Transistor Common Base Configuration Broadband Class C Operation Diffused Emitter Ballasting Resistors Gold Metalization System Internal Input and Output Impedance Matching Hermetic Metal/Ceramic.

RMPA2453 : 2.4-2.5 GHZ Ingap HBT Linear Power Ampthe RMPA2453 Power Amplifier is Designed For High Performance Wlan Applications in The 2.4-2.5GHz Frequency Band. The Low Profile 16 Pin 3 X 3 X 0.9 MM Package With Internal Matching on Both Input And Output to 50W Minimizes Next Level PCB Space And Allows For Simplified Integration. The On-chip Detector Provides.

SW-224 :  GaAs SPDT Switch, DC - 2 GHZ. Low Insertion Loss, 0.5 dB Typical Integral TTL Driver Low DC Power Consumption Bottom of Case is AC Ground. Dimensions ( ) are in mm. Unless Otherwise Noted:.xxx 0.010 (.xx 0.02 (.x 0.5) WEIGHT (APPROX.): 0.025 OUNCES 0.7 GRAMS Impedance 50 Ohms Nominal Switching Characteristics Trise, Tfall 10 ns Typ Ton, Toff (50% CTL to 90/10% RF) 150 ns Typ Transients.

TIM4450-8UL : C-Band Power GaAs IMFETs. Frequency Band (GHz) = 4.4-5.0 ;; P1dB (dBm) = 39.5 ;; G1dB (dB) = 10.5 ;; P.A.E. (%) Typ. = 36 ;; VDS (V) = 10 ;; Ids (A) Typ. = 2.2 ;; IM3 (dBc) Typ. = -47 ;; RTH ( C/W) Typ. = 2.5 ;; Additional Information = More Info.

MRFG35003N6 : Designed for 3.5 GHz WLL/MMDS/BWA or UMTS applications. Characterized from 0.5 to 5.0 GHz. Device is unmatched and is characterized for use in Class AB Customer Premise Equipment (CPE) applications. Typical W-CDMA Performance: -42 dBc ACPR, 3.55 GHz, 6 Volts, IDQ = 180 mA Output Power — 450 mWatts Power Gain — 9 dB Efficiency — 24% 3 Watts.

HMC334LP4 : GaAs PHEMT MMIC LOW NOISEc AMPLIFIER, 2 - 4 GHz The HMC334LP4 & HMC334LP4E are low noise, wideband downconverter RFICs which are ideal for Cellular/3G and WiMAX/4G applications from 0.8 to 2.7 GHz. The LO input accepts drive levels from -6 to +6 dBm while the RFIC provides 48 dB of LO to RF isolation, and 0 dB conversion loss. The HMC334LP4(E) will.

 
0-C     D-L     M-R     S-Z