Details, datasheet, quote on part number: NMA-2411
PartNMA-2411
CategoryRF & Microwaves => Noise Sources
DescriptionAmplified Noise Module, Noise Module Applications Include Rf/if Ber Testing, Jamming, Built-in Frequency Response Test, Freq: 10 MHZ to 8.5 GHZ
CompanyMicronetics Wireless
DatasheetDownload NMA-2411 datasheet
  

 

Features, Applications
DESCRIPTION

The NMA 2400 Noise Module is ideal for applications like jamming and built-in-test where high power and small size are required. The internally regulated driver provides long term highly stable noise output. Optional TTL is available for microprocessor control. Each NMA 2400 model is designed for easy integration into a wide range of equipment, from test sets to radar units.

FLATNESS * (window) dBm/BAND (min) dBm/Hz (min) ENR(dB) (min)
SPECIFICATIONS

s Operating Temperature: +85oC s Storage Temperature: C s Supply Voltage: / +15 VDC Internally regulated s Current Draw 350mA max s Output Impedance: 50 ohm s Peak Factor: 5:1

specifications subject to change based on technological advances

* Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest across the frequency band.

Each unit ships standard with a spectrum analyzer plot of the noise output. Upon special request, Micronetics can supply tabular data in text file format on CD-ROM or floppy disk. The data points consist of power spectral density at discrete frequency points across the frequency band.

APPLICATIONS

0 dB ENR = -174 dBm/Hz (eqn 1) Power (dBm) 0 +10log (BW) (eqn 2) where: N0 = Noise spectral density in dBm/Hz BW = Bandwidth in Hz

Voltage = 12V Option 1 = Stnd 2 = TTL * Package S = Pkg Style T = Pkg Style T

s Frequency response built-in-test (BIT) for communication receivers s Antenna/RF front end testing s 70/140 MHz & L-Band modem BER testing s Noise and interference simulation s Jamming / jamming simulation s Power distribution calibration of multiple receiver systems

(1) Should be mounted to a thermally conductive baseplate (2) Select style code T for mechanical clearance of mating SMA (m) connector nut with respect to thermally conductive baseplate


 

Related products with the same datasheet
NMA-2412
NMA-2413
NMA-2414
NMA-2415
NMA-2416
NMA-2417
NMA2400
Some Part number from the same manufacture Micronetics Wireless
NMA-2412 Amplified Noise Module, Noise Module Applications Include Rf/if Ber Testing, Jamming, Built-in Frequency Response Test, Freq: 10 MHZ to 8.5 GHZ
NMA-5101
NMA-ISM Amplified Noise Module, Performs Interference Tests For 802.11a, 802.11b, And Ism Products in General
NMA2000 Amplified Noise Module, Noise Module Applications Include if Ber Testing, Broadband Receiver Calibration, A/D Dithering, Freq: 100 HZ to 2 GHZ
NMA2100 Amplified Noise Module, Noise Module Applications: Baseband/if Ber Testing, Jamming Receiver Calibration, A/D Dithering, Freq: 100 HZ to 1 GHZ
NMA2400 Amplified Noise Module, Noise Module Applications Include Rf/if Ber Testing, Jamming, Built-in Frequency Response Test, Freq: 10 MHZ to 8.5 GHZ
NMA5100
NS-346A Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
NSI1218W Waveguide Noise Sources Applications Include: Receiver, Radiometer Built-in Test And Calibration, Freq: 12.4 to 110 GHZ
NSL-2 Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
NZG-10-100K Amplified Noise Module, Baseband Modules Applications Include A/D Dithering, Encryption, Base-band, Ber Testing, Jamming, Freq: 100 HZ to 5 MHZ
RFN/25C Broadband Coaxial Noise Sources Applications Include: Noise Figure Measurement, Built-in Receiver Testing
SD10W Traditional Noise Diode Applications Include A/D Dithering, Encryption, Built-in Receiver Test, Freq: 10 KHZ to 3 GHZ
 
0-C     D-L     M-R     S-Z