Details, datasheet, quote on part number: K1524A
PartK1524A
CategoryTiming Circuits => Oscillators => VCXO (Voltage Controlled Crystal Oscillators)
DescriptionPackage Description = 14 Pin Dip ;; Frequency = 3.000 to 35.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
CompanyM-tron Industries, Ltd
DatasheetDownload K1524A datasheet
  

 

Features, Applications

Phase-Locked Loops (PLL's), Clock Recovery, Reference Signal Tracking, Synthesizers, Frequency Modulation/ Demodulation


 

Some Part number from the same manufacture M-tron Industries, Ltd
K1525C Package Description = 14 Pin Dip ;; Frequency = 2.000 to 55.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1526A Package Description = 9 X 14 MM J-lead ;; Frequency = 2.000 to 40.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1526B Package Description = 9 X 11 MM J-lead ;; Frequency = 2.000 to 80.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1526BLC
K1526C
K1526CLC
K1526D Package Description = 9 X 14 MM J-lead ;; Frequency = 2.000 to 160.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1527A Package Description = 14 Pin Dip ;; Frequency = 2.000 to 51.840 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1528D Package Description = 14 Pin Dip ;; Frequency = 35.000 to 105.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 5.0 Volt
K1536B Package Description = 9 X 11 MM J-lead ;; Frequency = 2.000 to 80.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1536BLC
K1536C
K1536CLC
K1570A Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQA Package Description = 14 Pin Gull Wing ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQG Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQH Package Description = 14 Pin Dip ;; Frequency = 25.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1573A Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3 Volt
K1601 Package Description = 14 Pin MTL Dil ;; Frequency = 16.000 to 30.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5V
K1601T Package Description = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1601TE
Same catergory

ASM3P2762A : Clock Synthesis For Emi Reduced Frequency Generation. Generates an EMI optimized clocking signal at the output. Integrated loop filter components. Operates with 3.3V ±10% supply. Operating current less than 6mA. Low power CMOS design. Input frequency range: to 12MHz. Generates a 1X low EMI spread spectrum clock of the input frequency. Frequency deviation: -1.25%. Available TSOT-23, 8-pin SOIC and 8-pin.

CXO1923 : . Operating Temperature Frequency Stability Ageing @ 25°C Overall Stability (1) Supply voltage Current consumption Rise & fall time Load TTL Duty cycle -40°C~+85°C ±20 ppm ±3 ppm max/year ±50 ppm 20 mA max. 5 ns max. 15 pF max 45/55 (1) Including 25°C calibration, temperature, ageing 10 years, Vcc, load. changes SHORT FORM Data Sheet - For more details,.

FXO-61F : Crystal Oscillators. Frequency: 1.850 MHZ. ¡Ultra-thin,thickness (5×3.2×1.2mm). ¡It is a compact and thin ceramic package with a matalized lead for surface mounting that is able to be automatically loaded. ¡Reflow soldering is possible. ¡CMOS, TTL IC direct drive is possible. Depending upon the frequency band, there is also a crystal oscillator with a CMOS-IC with a tri-state function built.

ILC556D : Dual Timer DIP-14, SO-14. ILC556N is designed to be used: as high-precision pulse oscillator with adjustable frequency and on-off time ratio; for producing accurate time delays using external resistors and capacitors; as a timer in domestic appliances, in measuring equipment, computers; as functional units in electronic instruments. The timer may be used as oscillator producing.

LV8572A : Clock Circuits. Lv8572a Low Voltage Real Time Clock ( RTC ). The LV8572A is intended for use in microprocessor based systems where information is required for multi-tasking data logging or general time of day date information This device is implemented in low voltage silicon gate microCMOS technology to provide low standby power in battery back-up environments The circuit's architecture is such that it looks.

MXF45-30BF-FP4 : Frequency: 45 MHZ.

NJU6333A : Quartz Crystal Oscillator. Quartz Crystal Oscillator.

PI6C182 : Clock Circuits. Mobile PC, 10 Output Clock Driver. Low noise non-inverting 1-10 buffer Supports frequency to 125 MHz (PI6C182A) Supports up to four SDRAM DIMMs Low skew (<200ps) between any two output clocks I2C Serial Configuration interface Multiple VDD, VSS pins for noise reduction 3.3V power supply voltage Separate Hi-Z state pin for testing 28-pin SSOP package (H) Pericom Semiconductors PI6C.

SMV1679A : Package Style = Sub-l ;; Frequency (MHz) = 1678 to 1680 ;; N@10KHz (dBc/Hz) = -87 ;; Tuning Voltage (Vdc) = 0.00 to 3.00 ;; Tuning Sensitivity (MHz/V) = 45 ;; Power (dBm) = -5.00 ± 2.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 2.70 ;; Icc (mA) = 6.

TLC2934IPW : ti TLC2934, High Performance Single Phase Locked Loop. Voltage-Controlled Oscillator (VCO) ­ Ring Oscillator Using Only One External Biasing Resistor (RBIAS) Recommended Lock Frequency Phase-Frequency Detector (PFD) Includes a High-Speed Edge-Triggered Detector With Internal Charge Pump Independent VCO, PFD Power-Down Mode Thin Small-Outline Package (14 Terminal) Compatible Pin Assignment TLC2932, TLC2933.

V-TYPE : Frequency Range = 1.024MHz - 77.760MHz ;; Output = TTL / CMOS ;; Package (mm) = 5.0 X 7.5 X 2.1 ;; = Tristate.

V630ME02 : Package Style = MINI-14H ;; Frequency (MHz) = 2200 to 2285 ;; N@10KHz (dBc/Hz) = -94 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 53 ;; Power (dBm) = 4.00 ± 3.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 4.50 ;; Icc (mA) = 14.

ICS843001-21 : FemtoClocks™ Crystal-to-3.3V LVPECL Frequency Synthesizer The ICS843001-21 is a a highly versatile, low phase noise LVPECL Synthesizer which can generate low jitter reference clocks for a variety of communications applications and is a member of the HiPerClocksTM family of high performance clock solutions from ICS. The dual crystal interface allows.

ICS843252-04 : FEMTOCLOCKS™ CRYSTAL-TO- 3.3V LVPECL CLOCK GENERATOR The ICS843252-04 is a 10Gb/12Gb Ethernet Clock Generator and a member of the HiPerClocksTM family of high performance devices from ICS. The ICS843252-04 can synthesize 10 Gigabit Ethernet and 12 Gigabit Ethernet with a 25MHz crystal. It can also generate SATA and 10Gb Fibre Channel reference clock.

FMOCLVDSC1S : LVDS Oscillators manufactures high quality Low Voltage Differential Signaling (LVDS) Oscillators. Our LVDS oscillator designs come in a wide range of packages to meet your application needs..

DS1372 : I2C, 32-Bit, Binary Counter Clock with 64-Bit ID The DS1372 is a 32-bit binary up counter and 24-bit down counter with a unique 64-bit ID. The counters, ID, configuration, and status registers are accessed using an I2C serial interface. The DS1372 includes a SQW/active-low INT open-drain output that can output either a square wave at one of four predefined.

NB6L572M : 2.5V / 3.3V Differential 4:1 Mux To 1:2 CML Clock/Data Fanout / Translator The NB6L572M is a high performance differential 4:1 Clock / Data input multiplexer and a 1:2 CML Clock / Data fanout buffer that operates up to 6GHz / 8Gbps respectively with a 2.5V or 3.3V power supply. The differential Clock / Data inputs have internal 50-ohm termination resistors.

 
0-C     D-L     M-R     S-Z