Details, datasheet, quote on part number: K1570A
PartK1570A
CategoryTiming Circuits => Oscillators => VCXO (Voltage Controlled Crystal Oscillators)
DescriptionPackage Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
CompanyM-tron Industries, Ltd
DatasheetDownload K1570A datasheet
  

 

Features, Applications

5V Voltage Controlled Crystal Oscillators Applications: Phase-Locked Loops (PLL's); Clock Recovery; Reference Signal Tracking; Synthesizers; Frequency Modulation/Demodulation 14-pin DIL Package to 52.0 MHz Frequency Range to 4.5V Control Voltage 25ppm Stability to 85C Operating Temperature

Model Frequency Range (MHz) Input Current (mA) Frequency Control Function Deviation (ppm) Minimum Maximum Linearity Modulation Bandwidth (3dB) Nominal Control Voltage (V) Control Voltage Range (V) Transfer Function Input Impedance Frequency Stability (ppm) Overall to +85oC Temperature Range (oC) Operating Storage Supply Voltage (V) Symmetry CMOS/TTL Start Up Time (ms) Typical SSB Phase Noise (dBC/Hz) Offset from Carrier +125oC +5.0V Inclusive of Calibration, Temperature, Voltage, Load and Aging to 4.5 Positive < 26 (For Custom Deviation Range, Vc Range, etc. - Consult Factory)

XX - Specify Frequency "Blank" to 70C Operating Temp. "M" to +85C Operating Temp. "A" to 70oC Op. Temp. Only "B" = 50ppm

2553 N. Edgington Street, Franklin Park, 60131 y Phone: 847.451.1000 y Fax: 800-888-1499 or www.champtech.com

PIN FUNCTION Voltage Control Gnd/ & Case Gnd Output + VCC

Temperature Cycle Mechanical Shock Vibration Humidity Steady State Thermal Shock Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test

MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD 883, Mtd 2007, Cond. B MIL-STD-202, Mtd 103 MIL-STD-883, Mtd 1011.7 Cond. B MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1

DESCRIPTION

to +125C; Air-to-Air; 100 cycles; 10 min. dwell 1500 g's 20-2000 Hz; 0.06 inch; 15g's; 3 planes 40C; 90%-95% R.H.; 56 days to 0C; Water-to-Water; 15 cycles 4 KV Threshold Solder dip; Meniscograph Criteria Mass spectro. x 10-8 atmos. CC/sec He

MIL-STD-202, Mtd 210D, Cond. 260C; 10 seconds: 1 inch/sec. MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents

2553 N. Edgington Street, Franklin Park, 60131 y Phone: 847.451.1000 y Fax: 800-888-1499 or www.champtech.com


 

Some Part number from the same manufacture M-tron Industries, Ltd
K1570AQA Package Description = 14 Pin Gull Wing ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQG Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQH Package Description = 14 Pin Dip ;; Frequency = 25.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1573A Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3 Volt
K1601 Package Description = 14 Pin MTL Dil ;; Frequency = 16.000 to 30.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5V
K1601T Package Description = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1601TE
K1602 Package Description = 14 Pin MTL Dil ;; Frequency = 16.000 to 30.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5V
K1602SE Package Description = 14 Pin Dip ;; Frequency = 90.000 to 115.000 MHZ ;; Output Logic = Siave ;; Supply Voltage = 5.0 Volt
K1602T Package Description = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1602TE
K1603T
K1603TE
K1610 Package Description = 14 Pin Dip ;; Frequency = 1.000 to 27.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 5.0 Volt
K1610T Package Description = 14 Pin MTL Dil ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V
K1613 Package Description = 14 Pin Dip ;; Frequency = 1.000 to 25.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 3.3 Volt
K1700A Package Description = 14 Pin MTL Dil ;; Frequency = 2.000 to 35.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V
K17255B Package Description = 14 Pin Dip ;; Frequency = 155.520 MHZ ;; Output Logic = 10KH Pecl ;; Supply Voltage = 5.0 Volt
K3100G Package Description = 14 Pin MTL Dil ;; Frequency = 1.000 to 70.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3V
K3500G Package Description = 8 Pin MTL Dil ;; Frequency = 1.000 to 70.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3V
K500
Same catergory

49FCT805 : Dual 1:5 Clock Driver W/cmos Outputs. 0.5 MICRON CMOS Technology Guaranteed low skew < 700ps (max.) Low duty cycle distortion < 1ns (max.) Low CMOS power levels TTL compatible inputs and outputs Rail-to-rail output voltage swing High drive: -24mA IOH, +64mA IOL Two independent output banks with 3-state control 1:5 fanout per bank "Heartbeat" monitor output Available in SSOP and SOIC.

BQ3287 : Clock Circuits. Real-time Clock (rtc) Module. Direct clock/calendar replacement for IBM AT-compatible computers and other applications Functionally compatible with the DS1287/DS1287A and 114 bytes of general nonvolatile storage Integral lithium cell and crystal 160 ns cycle time allows fast bus operation Selectable Intel or Motorola bus timing 14 bytes for clock/calendar and control.

CY24712 : Clock Generator With Vcxo. MediaClockTM Set-top Box Clock Generator with VCXO Integrated phase-locked loop (PLL) Low-jitter, high-accuracy outputs VCXO with analog adjust 3.3V Operation 8-pin SOIC Part Number CY24712 Outputs 3 Input Frequency Range 27-MHz pullable crystal input per Cypress Benefits High-performance PLL tailored for Set Top Box applications Meets critical timing.

EX-380-CAD-ST3-A : Frequency Range = 10MHz - 80MHz ;; Output Logic = Hcmos Sine (EX-385) ;; Package = 0.50" X 0.8" X 0.3" ;; = +3.3 VDC Low Profile Stratum 3.

FS6128-04 : General Purpose PLL. PLL Clock Generator ic With Vcxo. Phase-locked loop (PLL) device synthesizes output clock frequency from crystal oscillator or external reference clock On-chip tunable voltage-controlled crystal oscillator (VCXO) allows precise system frequency tuning Typically used for generation of MPEG-2 decoder clock 3.3V supply voltage Very low phase noise PLL Use with "pullable" 14pF crystals.

ICS525-03 : Peclinput User Configurable Clock. ICS525-03 PECL Input OSCaRTM User Configurable Clock The ICS525-03 OSCaRTM is the most flexible way to generate a high quality, high accuracy, high frequency clock output from a PECL clock input. The name OSCaR stands for OSCillator Replacement, it is designed to replace crystal oscillators in almost any electronic system. The user can easily configure.

ICS951702 : Motherboards. Frequencygenerator For PIII/1644 or 1644T Mobile Applications.

LMX2353 : Fractional-N PLLs. LMX2353 - Pllatinum Fractional N Single 2.5 GHZ Frequency Synthesizer, Package: Laminate Csp, Pin Nb=16.

PI6C184 : Clock Circuits. Desktop PC, 13 Output Clock Driver (IMI Compatible). High speed, low noise non-inverting 1-13 buffer Supports up to four SDRAM DIMMs Low skew 250ps) between any two output clocks I2C Serial Configuration interface Multiple VDD, VSS pins for noise reduction 3.3V power supply voltage Separate Hi-Z pin for testing 28-pin SSOP and SOIC packages (H, S) The is a high-speed low-noise 1-13 non-inverting buffer.

QS5V991 : General Purpose/. 3.3v Programmable Skew PLL Clock Driver Turboclock(tm).

SF0140BA01969T : 140. Micro Networks., 324 Clark Street, Worcester, MA 01606, USA tel: 508-852-5400, fax:508-852-8456, www.micronetworks.com Parameter Center Frequency 1 Insertion Loss dB BW Amplitude ripple(Fc 7 MHz) Phase ripple(Fc 7 MHz) Group delay ripple(Fc 7 MHz) Absolute delay Ultimate rejection Ambient Temperature 3 Substrate material Min. 41,5 43.5 Typ. Max.

SMV1440L : Package Style = Sub-l ;; Frequency (MHz) = 1380 to 1500 ;; N@10KHz (dBc/Hz) = -93 ;; Tuning Voltage (Vdc) = 0.00 to 3.00 ;; Tuning Sensitivity (MHz/V) = 101 ;; Power (dBm) = 0.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 3.00 ;; Icc (mA) = 13.

SY100ELT20V : SY10/100ELT20V 5V/3.3V Ttl-to-differential Pecl Translator. 3.3V and 5V power supply options 300ps typical propagation delay Low power Differential PECL output PNP TTL input for minimal loading Flow-through pinouts Available in 8-pin SOIC package and in die form Precision EdgeTM The is a single TTL-to-differential PECL translator. Because PECL (Positive ECL) levels are used, either or +3.3V and ground are required.

TS556 : Low Power. Low Power Dual CMOS Timer. 220 A typ at VCC 180 A typ at VCC = 3V HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE556 WIDE VOLTAGE RANGE to +16V HIGH OUTPUT CURRENT CAPABILITY SUPPLY CURRENT SPIKES REDUCED DURING OUTPUT TRANSITIONS HIGH INPUT IMPEDANCE : 1012 OUTPUT COMPATIBLE WITH TTL,CMOS AND LOGIC MOS The is a dual CMOS timer which.

W170-01 : General Purpose/. Spread Aware, Frequency Multiplier And Zero Delay Buffer.

ICS855011 : Low Skew, 1-to-2 Differential-to-2.5V/3.3V CML Fanout Buffer The ICS855011 is a low skew, high performance 1-to-2 Differential-to-2.5V/3.3V CML Fanout Buffer and a member of the HiPerClockS family of High Performance Clock Solutions from ICS. The ICS855011 is characterized to operate from either a 2.5V or a 3.3V power supply. Guaranteed output and part-to-part.

CDCLVP215 : Dual 1:5 High Speed LVPECL Fan Out Buffer The CDCLVP215 clock driver distributes two times one differential clock pair of LVPECL, (CLKA, CLKB) to 5 pairs of differential LVPECL clock (QA0.QA4, QB0.QB4) outputs with minimum skew for clock distribution. The CDCLVP215 specifies low output-to-output skew. The CDCLVP215 is specifically designed for driving.

NBXDPA012 : 2.5 V / 3.3 V, 106.25 MHz / 212.50 MHz PureEdge Dual Frequency LVDS Clock Oscillator Module The NBXDPA012 dual frequency crystal oscillator (XO) is designed to meet today\'s requirements for 2.5 V and 3.3 V LVDS clock generation applications. The device uses a high Q fundamental crystal and Phase Lock Loop (PLL) multiplier to provide selectable 106.25.

 
0-C     D-L     M-R     S-Z