Details, datasheet, quote on part number: K1570AQA
PartK1570AQA
CategoryTiming Circuits => Oscillators => VCXO (Voltage Controlled Crystal Oscillators)
DescriptionPackage Description = 14 Pin Gull Wing ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
CompanyM-tron Industries, Ltd
DatasheetDownload K1570AQA datasheet
  

 

Features, Applications

5V Voltage Controlled Crystal Oscillators Applications: Phase-Locked Loops (PLL's); Clock Recovery; Reference Signal Tracking; Synthesizers; Frequency Modulation/Demodulation 14-pin DIL Package to 52.0 MHz Frequency Range to 4.5V Control Voltage 25ppm Stability to 85C Operating Temperature Gull Wing

Model Frequency Range (MHz) Input Current (mA) Frequency Control Function Deviation (ppm) Minimum Maximum Linearity Modulation Bandwidth (3dB) Nominal Control Voltage (V) Control Voltage Range (V) Transfer Function Input Impedance Frequency Stability (ppm) Overall to +85oC Temperature Range (oC) Operating Storage Supply Voltage (V) Symmetry CMOS/TTL Start Up Time (ms) Typical SSB Phase Noise (dBC/Hz) Offset from Carrier +125oC +5.0V Inclusive of Calibration, Temperature, Voltage, Load and Aging to 4.5 Positive < 26 (For Custom Deviation Range, Vc Range, etc. - Consult Factory)

X - Specify Frequency "Blank" to 70C Operating Temp. "M" to +85C Operating Temp. (50ppm only)

2553 N. Edgington Street, Franklin Park, 60131 y Phone: 847.451.1000 y Fax: 800-888-1499 or www.champtech.com

FUNCTION Voltage Control Gnd/ & Case Gnd Output + VCC

Temperature Cycle Mechanical Shock Vibration Humidity Steady State Thermal Shock Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test

MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD 883, Mtd 2007, Cond. B MIL-STD-202, Mtd 103 MIL-STD-883, Mtd 1011.7 Cond. B MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1

DESCRIPTION

to +125C; Air-to-Air; 100 cycles; 10 min. dwell 1500 g's 20-2000 Hz; 0.06 inch; 15g's; 3 planes 40C; 90%-95% R.H.; 56 days to 0C; Water-to-Water; 15 cycles 4 KV Threshold Solder dip; Meniscograph Criteria Mass spectro. x 10-8 atmos. CC/sec He

MIL-STD-202, Mtd 210D, Cond. 235C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents

2553 N. Edgington Street, Franklin Park, 60131 y Phone: 847.451.1000 y Fax: 800-888-1499 or www.champtech.com


 

Some Part number from the same manufacture M-tron Industries, Ltd
K1570AQG Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1570AQH Package Description = 14 Pin Dip ;; Frequency = 25.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1573A Package Description = 14 Pin Dip ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3 Volt
K1601 Package Description = 14 Pin MTL Dil ;; Frequency = 16.000 to 30.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5V
K1601T Package Description = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1601TE
K1602 Package Description = 14 Pin MTL Dil ;; Frequency = 16.000 to 30.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5V
K1602SE Package Description = 14 Pin Dip ;; Frequency = 90.000 to 115.000 MHZ ;; Output Logic = Siave ;; Supply Voltage = 5.0 Volt
K1602T Package Description = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt
K1602TE
K1603T
K1603TE
K1610 Package Description = 14 Pin Dip ;; Frequency = 1.000 to 27.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 5.0 Volt
K1610T Package Description = 14 Pin MTL Dil ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V
K1613 Package Description = 14 Pin Dip ;; Frequency = 1.000 to 25.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 3.3 Volt
K1700A Package Description = 14 Pin MTL Dil ;; Frequency = 2.000 to 35.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V
K17255B Package Description = 14 Pin Dip ;; Frequency = 155.520 MHZ ;; Output Logic = 10KH Pecl ;; Supply Voltage = 5.0 Volt
K3100G Package Description = 14 Pin MTL Dil ;; Frequency = 1.000 to 70.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3V
K3500G Package Description = 8 Pin MTL Dil ;; Frequency = 1.000 to 70.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3V
K500
K500F Package Description = 8 Pin MTL Dil ;; Frequency = 1.500 to 100.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V
Same catergory

82C84A : CPU/Memory Specific PLL. CMOS Clock Generator Driver. The Intersil is a high performance CMOS Clock Generatordriver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-bythree counter and complete "Ready" synchronization and reset logic. Static CMOS circuit design permits operation.

CD54HCT4046A : PLL/Frequency Synthesis-> CMOS/BiCMOS->HC/HCT Fami. High-speed CMOS Logic Phase-locked-loop With Vco.

CY7B993V-2AC : RoboClock. Roboclock. 500-ps max. Total Timing BudgetTM (TTBTM) window 24200-MHz (CY7B994V) output operation Matched pair output skew < 200 ps Zero input-to-output delay 18 LVTTL outputs driving 50 terminated lines 16 outputs at 200 MHz: Commercial temperature 6 outputs at 200 MHz: Industrial temperature 3.3V LVTTL/LVPECL, fault-tolerant, and hot insertable reference.

FMOC3S : SMD Hcmos/ttl Compatible 3.3 VDC 3.3 VDC.

FVS25AXT : 3.3V 5.0 X 3.2mm Hcmos Ceramic SMD. 3.3V Operation HCMOS Output Enable/Disable Tape and Reel (2,000 pcs. STD) Pb Free Frequency Range (FO ) Temperature Range Operating (TOPR ) Storage (TSTG) Frequency Stability Pullability Supply Voltage (VDD ) Control Voltage (VC) Input Current (I DD MHz ~ 52.000 MHz Output Symmetry (50% V DD) Rise Time ~ 80% VDD) (TR) Fall Time ~ 20% VDD) (TF) Output.

MK74CB214 : Clock Circuits. Dual 1 to 7 Buffalo(tm) Clock Driver. The MK74CB214 BuffaloTM is a monolithic CMOS high speed clock driver which is ideal for PentiumTM, 486, and RISC processor systems. It consists of two identical single input to seven lowskew output, non-inverting clock drivers. When combined with MicroClock's MK14xx series of low jitter clock synthesizers, the two chips form an unequaled high performance.

MPV3 : Package = 9x14 MM J-lead ;; Frequency = 0.750 to 800.000 MHZ ;; Output Logic = Lvpecl/lvds ;; Supply Voltage = 3.3 Volt.

MXF10.7-7.5AL : Frequency: 10.7 MHZ.

NB100LVEP224FA : 2.5V/3.3V 1:24 Differential Ecl/pecl Clock Driver With Clock Select And Output Enable, Package: 64 Lead Exposed Pad Lqfp, Pins=64.

OSC-1A0 : Frequency Range = 10 MHZ - 44 MHZ ;; Output Logic = Clipped Siave ;; Package = < 2.2mm Height 11.8 X 9.9 X 2.2mm SMD ;; = Reflow Solderable, Low Phase Noise.

SF1125A : SAW Resonators. Frequency = 380.0 ;; = Filter, W-cdma if. Designed for WCDMA 3G IF Applications Excellent Size-to-Performance Ratio Hermetic 6.5 mm Surface-Mount Case Associated Plots Attached Characteristic Nominal Center Frequency Passband Insertion Loss 1 dB Passband 3 dB Passband Amplitude Ripple over fc 2.25 MHz Phase Variation over fc 2.25 MHz Group Delay Variation over fc 2.25 MHz to fc-3.3 and to fc+3.95.

TFS246B : SAW Devices (Surface Acoustic Wave). Application = Gsm,dcs,pcs ;; Center Frequency = 246.0 MHZ ;; 3 DB = 160 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 8.0dB ;; Group Delay Ripple = 1.2µs ;; Package = 9 MM X 7 MM LCC.

W181 : CPU/Memory Specific PLL. Peak Reducing Emi Solution. Cypress PREMISTM family offering Generates an EMI optimized clocking signal at the output Selectable input to output frequency Single or 3.75% down or center spread output Integrated loop filter components Operates with or 5V supply Low power CMOS design Available in 8-pin SOIC (Small Outline Integrated Circuit) or 14-pin TSSOP (Thin Shrink Small Outline.

VS-720 : VS-720 Voltage Controlled Saw Oscillator he VS-720 is a Voltage Controlled SAW Oscillator that achieves low phase noise and very low jitter performance. The VS-720 is housed in an industry standard 6-Pad leadless ceramic package that is hermetically sealed. Packaging options include bulk or tape and reel..

NB7L572 : 2.5 V / 3.3 V Differential 4:1 Mux Input To 1:2 LVPECL Clock/Data Fanout/Translator The NB7L572 is a high performance differential 4:1 Clock/Data input multiplexer and a 1:2 LVPECL Clock/Data fanout buffer. The INx/INxb inputs include internal 50-ohm termination resistors and will accept differential LVPECL, CML or LVDS logic levels. The NB7L572 incorporates.

AD9837 : Low Power, 8.5 MW, 2.3 V To 5.5 V, Programmable Waveform Generator The AD9837 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software.

ADF4196 : Low Phase Noise, Fast Settling 6 GHz PLL Frequency Synthesizer The ADF4196 frequency synthesizer can be used to implement local oscillators (LO) in the upconversion and downconversion sections of wireless receivers and transmitters. Its architecture is specifically designed to meet the GSM/EDGE lock time requirements for base stations, and the fast.

 
0-C     D-L     M-R     S-Z