Details, datasheet, quote on part number: P6KE110CA
PartP6KE110CA
CategoryDiscrete => TVS (Transient Transient Voltage Suppressors)
DescriptionPakage = DO-15 ;; Devices Marking Code= ;; Nominal Voltage(V) = 10
CompanyTaiwan Semiconductor (TSC)
DatasheetDownload P6KE110CA datasheet
Cross ref.Similar parts: P4KE110CA, P6KE110C, 1N6131A, SA90CA
Quote
Find where to buy
 
  

 

Features, Applications
Voltage Range to 440 Volts 600 Watts Peak Power 5.0 Watts Steady State
Features

UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards MIL-STD-19500 600W surge capability 100 us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: / 10 seconds /.375",(9.5mm) lead length / 5lbs.,(2.3kg) tension

a Case: Molded plastic Lead: Axial leads, solderable per MIL-STD-202, Lead: Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.34gram Dimensions in inches and (millimeters)

Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%

Peak Power Dissipation TA=25OC, Tp=1ms (Note 1) Steady State Power Dissipation TL=75 C Lead Lengths.375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range

4. VF=3.5V for Devices of VBR 200V and VF=5.0V Max. for Devices of VBR>200V. Devices for Bipolar Applications 1. For Bidirectional Use or CA Suffix for Types P6KE6.8 through Types P6KE440. 2. Electrical Characteristics Apply in Both Directions.

Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2. Mounted on Copper Pad Area x 40 mm) Per Fig. 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum.

PEAK PULSE POWER (Ppp) or CURRENT (IPPM) DERATING IN PERCENTAGE, %
PM(AV), STEADY STATE POWER DISSIPATION, WATTS
PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS 50% of lPPM
HALF VALUE- lPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A.
lFSM, PEAK FORWARD SURGE CURRENT, AMPERES
FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY
8.3ms Single Half Sine Wave JEDEC Method
Maximum Peak Pulse Current IRSM (Note 2)(Amps)

Notes: 1. VBR measured after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waverform per Figure 3 and derate per Figure 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35.


 

Related products with the same datasheet
P6KE100
P6KE100A
P6KE100C
P6KE100CA
P6KE10A
P6KE10C
P6KE10CA
P6KE11
P6KE110
P6KE110A
P6KE110C
Some Part number from the same manufacture Taiwan Semiconductor (TSC)
P6KE11A Pakage = DO-15 ;; Devices Marking Code= ;; Nominal Voltage(V) = 10
 
0-C     D-L     M-R     S-Z