Details, datasheet, quote on part number: E13W1D2C-155520MTR
CompanyEcliptek Corporation
DatasheetDownload E13W1D2C-155520MTR datasheet


Features, Applications
DATE: TO: FROM: RE: August 25, 2005 All Sales Personnel Mark Stoner Product Termination

To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective August 25th, 2005: Series E11W1 E13W1 Description 5V 4 pad SMD LVPECL Oscillator 3.3V 4 pad SMD LVPECL Oscillator Recommended Replacement E13C7

In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after November 25th, 2005, with delivery to conclude by February 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation.

Mark W. Stoner Director of Marketing Ecliptek Corporation

PECL Output Oscillators 5.0V supply voltage 4 pad PCB SMD package Stability to 20ppm Output Enable/Disable available Complementary Output available Available on Tape and Reel

Frequency Range Operating Temperature Range Available at Frequencies < 212.500MHz Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter

VCC-1.025VDC Minimum VCC-1.620VDC Maximum 80% of waveform 50% of waveform 2 nSeconds Maximum Ohms into VCC-2.0VDC No Connect, Enable/Disable, or Complementary Output Enables Output Enables Output Disables Output: Logic Low 10 mSeconds Maximum to 20MHz

FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over +70C D=50ppm Maximum over +70C E=25ppm Maximum over +70C F=20ppm Maximum over +70C G=100ppm Maximum over +85C H=50ppm Maximum over to +85C DUTY CYCLE

AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output

Pin 1: Complementary Output, No Connect, or Enable/Disable Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage

Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents

Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215

Week of Year Last Digit of Year Ecliptek Manufacturing Identifier


Related products with the same datasheet
Some Part number from the same manufacture Ecliptek Corporation
EC1N-T-20-30.000M-I2TR Crystal
E13C7D2F-155.520M Oscillator
E2UHAS-20.000M-CXA Crystal
EMK23 Oscillator
E2UCBS-20.000M-CXA Crystal
EC3245-24.000M Oscillator

E5M2DCAS-30000M : Crystal

EC1E-T-20-30000M-I2TR : Crystal

EB72F71C08CV2-20.000M : Oscillator

ECCM32BGT-20-70.000MTR : 1.5mm Glass Surface Mount Crystal

EB52F5G30EV-12800M-G : Oscillator

EC4SMD-B-25000MTR : Crystal

EC2005BTTS-24.000M-CL : Oscillator

E3UEB18-30000M-CD : Crystal

E1SCB18-20.000MTR : Crystal

EB72F51D28CV2-20000M-CL : Oscillator

0-C     D-L     M-R     S-Z