Details, datasheet, quote on part number: E13W2F2D-155520MTR
PartE13W2F2D-155520MTR
Category
DescriptionOscillator
CompanyEcliptek Corporation
DatasheetDownload E13W2F2D-155520MTR datasheet
  

 

Features, Applications
DATE: TO: FROM: RE: August 25, 2005 All Sales Personnel Mark Stoner Product Termination

To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective August 25th, 2005: Series E11W2 E13W2 Description 5V 6 pad SMD LVPECL Oscillator 3.3V 6 pad SMD LVPECL Oscillator Recommended Replacement E13C7

In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after November 25th, 2005, with delivery to conclude by February 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation.

Mark W. Stoner Director of Marketing Ecliptek Corporation

PECL Output Oscillators 5.0V supply voltage 6 pad PCB SMD package Stability to 20ppm Output Enable/Disable available Complementary Output available Available on Tape and Reel

Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output 80% of waveform 50% of waveform VCC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum Ohms into VCC-2.0VDC No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter

Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum

FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over +70C D=50ppm Maximum over +70C E=25ppm Maximum over +70C F=20ppm Maximum over +70C G=100ppm Maximum over +85C H=50ppm Maximum over to +85C DUTY CYCLE

AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable

Pin 1: Complementary Output or No Connect Pin 4: Output Pin 2: Enable/Disable or No Connect Pin 5: No Connect Pin 3: Case Ground Pin 6: Supply Voltage

Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents

Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215

Week of Year Last Digit of Year Ecliptek Manufacturing Identifier

 

Related products with the same datasheet
E13W2F1A-155.520MTR
E13W2F1A-155520M
E13W2F1A-155520MTR
E13W2F1B-155.520M
E13W2F1B-155.520MTR
E13W2F1B-155520M
E13W2F1B-155520MTR
E13W2F1C-155.520M
E13W2F1C-155.520MTR
E13W2F1C-155520M
E13W2F1C-155520MTR
E13W2F1D-155.520M
Some Part number from the same manufacture Ecliptek Corporation
E2SGA18-20.000M Crystal
E2SLAS-20.000M
E1SCC18-20.000M
E1M3BCA20-30.000M
E1UGC18-20.000M-CXA
EC31 Oscillator
ECCM35AAT-20-70.000M 1.5mm Glass Surface Mount Crystal
 
0-C     D-L     M-R     S-Z